Why you should verify your Oil Injection System on a "new to you" 2 stroke powered vehicle!
Вставка
- Опубліковано 25 сер 2024
- Check out my thoughts on what to do when you purchase a vehicle that uses an oil injection system.Many times there are things you just have to learn over time when being a mechanic. This is one of those "just better check it" situations. If you don't, you'll wish you did in a hurry.
Click the links to playlists: (entire list link is the last one)
Harley EVO: • "How To": Evolution St...
Harley Twin Cam: • "How To": Twin Cam Har...
4-Stroke Engines: • "How To": 4-Stroke-Eng...
2-Stroke Engines: • "How To": 2 Stroke-Eng...
"Every Mechanic Should Know This Training": • "Every Mechanic Should...
Transmission: • "How To": Transmission...
Wheels, tires, brakes: • "How To": Tires / Whee...
Electrical: • "How To": Electrical S...
Fuel, air, intake: • "How To": Fuel / Intak...
Suspension: • "How To": Suspension S...
All playlists by type:
/ conleybuilt
You will see that many of the tips and procedures used are universal for skill sets "every mechanic should know" and that the biggest value to my videos is the teaching of these skills that are not found in a service manual.
I often get asked this question:
Q: How does one learn these skill sets "every mechanic should know" if they are not found in a manual?
A: NUMBER 1.....GET DIRTY and start wrenching.
-Ask questions
-Find a seasoned craftsman to mentor under
-Tech schools can significantly speed this time up
-Research, read, watch UA-cam videos
Tip: You will never learn it all from one source or in a short time period. No matter what craft you are trying to master, YOU must be dedicated and put the time in. THERE IS NO BETTER WAY TO LEARN THAN DOING! I will say it again, you must actually do the work to master it. You cannot just watch or read about it and master anything.
You want to be a master bike builder, mechanic, welder, nurse, carpenter or you fill in the blank?
-Don't take for granted opportunities to learn deeper
-Be humble and seek advice
-Be intentional with your learning plan
-Don't blame a school, job or your parents for not giving you ever answer, go get it!
I teach a motorcycle/powersports technician program at Western Iowa Tech Community College in Sioux City, Iowa. These videos are used for review of labs for students and creating a deeper understanding of the lesson/skill set. As there is often more than one way of doing something, may you enjoy this free information as much as our students do in person. PLEASE HIRE OUR GRADUATES!
If you would like more info on the program feel free to contact me @ 712-274-8733 ext 1204 or email shane.conley@witcc.edu
Are you interested in a career in the motorcycle industry? Click here for information on a great technician and parts specialist training program:
• Motorcycle Technician ...
I had a so-called certified mechanic install the oil pump linkage on my 2-stroke outboard on the wrong side. It was easy enough to do since it just clips on. It took me years of trying to figure out why it was running rich, idling poorly, smoking like crazy, and fouling plugs to finally search up a shop manual that showed a drawing of the pump set up correctly. The fix literally took 2 seconds and not only did it now look like the picture, but setting marks for idle and WOT now lined up. I paid that guy some serious money to screw that up for me.
Other things I discovered he put back on wrong: The hose that is supposed to deliver water from the top of the engine to the poppet valve was run straight to the tell-tale, and the hose that is supposed to go to the tell-tale was run through the thermal air valve to the poppet valve. Like, seriously. He had to add a hose to do it. The hose that was supposed to go from the thermal air valve to the carburetors was just lying in the bottom of the cowling. I'm surprised it ran at all. This also required a dive into the service manual for me to find a diagram of the correct plumbing. Now I am concerned if he managed to screw things up this badly on the outside, did he get the work he was doing inside the engine correct? It seems to run ok now, but short of tearing the powerhead open I can't inspect it.
Then, this other time I had the steering cable replaced by a different shop, and the joker managed to put the pinion upside-down so that the boat steered backwards! (The motor needed to be lifted to get the cable in/out is why I didn't do it myself.) He also managed to crush the transom by over-torqueing 2 of the bolts. Luckily the shop fixed it for free and fired the guy but it was still a huge hassle.
I've also had nothing but trouble with a KLX250 that had an after market exhaust on it. I figured I was getting a deal until I found out that the carb had been modified and the airbox as well, so it had lots of power but otherwise ran like crap! It took me a new carburetor and snorkel to finally get it running correctly. (Yes, snorkel. People thing removing it gives more airflow, and it does at low speeds, but it creates turbulence at high speeds. Kawasaki didn't spend the money to equip the bike with the snorkel just to make it worse! You ain't making it better by removing it! Same with drilling holes in the air box and other dumb things people do.)
Folks, be careful who you let wrench on your stuff! And if the owner worked on it, assume whatever he did needs to be undone or redone, and there might be serious damage as a result of his work.
Bottom line: Buy new if you can afford it, and only use certified mechanics with lots of references. Most people, even so-called mechanics, have an unending ability to screw things up royally.
I wish there was a way I could show you this somewhere else, now I see what's really happening. The seller had capped off the nipple cone from the oil tank and capped off two other Hoses connecting to the oil pump. And the hose connected to the manifold... IS JUST CONNECTED TO THE OTHER VACUUM LINE OF THE GAS VENT PETCOCK.. man are some folks stupid. I thank you for showing this. And I'm saying g this now because this is the exact same scooter I have and now I see where that's supposed to be going. I appreciate it
My jet ski mechanic tells me 2 stroke oil injectors rarely fail. What causes the problem is old supply lines that get brittle and leak . Replace your oil injector lines often and you are fine running straight gasoline.
Agree with your mechanic...keep them...😎
We sure love you taking the time to comment. Are you coming to the next live session?
There a few ways you could help keep this work going and stay connected with me personally.
1. The fastest and best thing you could simply do for us is hit that subscribe button…helps us creators more than you know!
2. Join this channel to get access to perks:
ua-cam.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
3. Give us a high 5 here: www.paypal.me/how2wrench
Keep Wrenching,
Shane Conley
Peoria, AZ USA
Follow us!
www.How2Wrench.com
www.Tools2Wrench.com
Facebook:
facebook.com/How2Wrench/
Instagram:
instagram.com/how2wrench/
Just bought a Honda aero 80cc 2T. 40 years old and still has supple and fresh rubber.
@@christianrios6295 They have been replaced no doubt. 👍
When I remove a oil pump system on a PWC , I remove everything...pump, lines etc. I put a large decal at the fuel fill and dash indicating that it runs on pre-mix fuel and ratio it requires.
Thanks for sharing. Great idea Bubba! Keep them coming and welcome to the community!
Have you subscribed yet to never miss a video? Have you seen the video playlists ua-cam.com/users/conleybuiltplaylists ?
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com
You are the hero we all deserve...
Really clear explanation, great video.
👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us!
Here is a way to support all the free videos.
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way!
Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com
Is it better to remove that oil pump and just mix yourself even if the pump is working? 2005 LT 80 new to me.
How do you determine how much two stroke should be pumped through?
I've had oil pumps fail on me twice, costing me an engine rebuild both times. I just premix gas and run the tank dry. Never had an issue.
Thank you for taking the time to comment! Hit that subscribe button please! It helps us!
Here is a way to support all the free videos.
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way!
Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com
Me too!! Had a jet ski blow up on the middle of river. Will never trust those pumps again.
Great video😊 I had a lot of 2 stroke street bikes over the years like my 12 year old Yamaha DT125R in the profile picture still on its original engine with oil injection and never had and issues, With proper maintenance and good two stroke oil you shouldn't have a probem
And it's also necessary on a lot of motorcycle engines to maintain that oil pump because it not only mixes with the fuel, it lubricates engine parts. Premixing only works until you burn up your engine.
@@johnjriggsarchery2457 100% bullshit. You dont know what you are talking about. It does not lubricate any engine parts. Thats what the crank oil is for. It injects oil into carb. I've personally seen 3 motors blow due to oil pump.
Hi thank you for marvelous demonstration
Glad it helped. We will let Shane know!
You rock! Best way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!)
Have you seen our "UA-cam Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
Join this channel to get access to perks:
ua-cam.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Just want to say thanks quick to support us for this information and our work saving you money?
Give us a high 5 here: www.paypal.me/how2wrench
Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Pw80 s the throttle cable splits off sometimes oil injection part of the cable breaks while the throttle cable does not break running the engine dry
I am repairing a golf cart for a friend it has the same style pump I took the pump apart and nothing is stuck lose or worn and seems to move correctly, my question is how can you tell if the pump is bad? Most people are just scared of systems they don't understand, can't see it with your eyes you can't have faith in it! I think they are a proven injection pump system if maintenance is kept up right changing filters regularly.
For instance the golf cart I am working on scored the cylinder but the root cause was crank bearings it was sucking air through them along with a bunch of dirt.
You're in luck. I do offer personal service to back up what's missing from a video to actually fix your specific problem. I do work on donations for my time and possible research.
Good news is its CHEAP! For my time would mind becoming a member of my website? It comes with a free 20 mins of techline and that will cover my time to assist you so we both benefit. So to have me personal cell phone number to put in your phone as your direct info and how to coach, sign up now! As always thank you and enjoy the free videos! Much more to come! I look forward to working with you and hope you will become a member of or learning community.
Link to membership: how2wrench.com/product/membershipmembers-onlymembers?
If I can ever be of service to you, here is a video explains how to connect with me.
ua-cam.com/video/vjvmB01ebcs/v-deo.html
Direct link to services:
how2wrench.com/product-category/tech-lineservice-callminutes/
Live Chat is great for you to actually show your specific issue!
Donation link: www.paypal.me/how2wrench
On some motors one of the oil feed lines lubricates an engine bearing, so if you decommision the pump and run premix only you starve one of the crank bearings.
Thanks for the input....
Best way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!)
Have you seen our "UA-cam Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
Join this channel to get access to perks:
ua-cam.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Just want to say thanks quick to support us for this information and our work saving you money?
Give us a high 5 here: www.paypal.me/how2wrench
Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Green machine, i have a question.. i have suzuki v100 scooter.. i have a problem with 2t oil that go to the bearing.. it doesnt flow there. why is that happen.
What do you think about bleeding the oil lines by removing the spark plug(s) and the lines from the manifold and running the starter or kick starter until no air is left in them and you see oil only? Thanks.
I hew scooter 2 stroke and i vant to mix oil/gass not using oil pum vat sulf i do?
Wouldnt the pump still be getting oil, just not the carbs if the B.B is in the output just before the carb?
Does anyone know how to test oil pump.. Honda elite 50... thanks!
Older bikes feed oil to the intake, and the crank bearing on the oil pump side. Check to see if that is the case.
If it is, leave the tank, and that line, or run it on a loop from the case itself.
👍
So just leave everything hooked up oe and premix?
@@Ashroyer86
What bike is it?
If the bike has 2 lines coming from the oiler, yes. If it only oils the intake, you can just premixed, but there wont be oil in the pump.
A re-route is for bikes with 2 lines. You disconnect and plug the oiler to intake line, and the hole, but leave the one that goes to the crank. Then you have the pump take oil from the case, and premix.
The easiest way is to just use it as-is if it has a crank oiler.
Cheers
@@r1nger81 yamaha srv with crank oiler. Just decided I may not fix it because of rust.
@@Ashroyer86
The snow machine?
Great donor motor for a scary fast gokart or buggy. 👍
@@r1nger81 so all i do is plug the intake line off and then premix the gas my scooter oils crank bearings too
One I just bought was ran dry and it wasnt pumping oil. It destroyed the cylinder. I bled the pump like the other video shows, and now its running great with the new cylinder.
Thanks Justin! Glad it helped!
Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please.
Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏
You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks:
ua-cam.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE!
1. Smash the subscribe button (thank if already a sub!)
2. Have you seen our "UA-cam Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
3. High five donation: www.paypal.me/how2wrench
4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
i have a baja sc 50 i just got it and I've been trying to make it run, already changed the cdi just to make sure, new spark plug and charged the battery... now when i put gas for some reason it goes to the oil tank... i really don't know that much about scooters and I'll appreciate some help
I have an oil injector on an old Honda dirt bike that seems to be letting oil leak into the manifold when the engine is off. Is there some seal in the unit that can be replaced to fix the leak?
Have you Subscribed yet to never miss a video? Have you seen the video playlists ua-cam.com/users/conleybuiltplaylists ? Quick answers are often found here. No time to look through videos?
Still have questions? You’re in luck! I provide tech help and work one on one! I know your question may seem quick but with over 300 requests a week, it’s not possible to answer them all. So, I’ve narrowed down so subscribers and donations to assist beyond the over 660 free videos. My UA-cam has grown beyond the ability to answer every question (11 million views! Over 500,000 a month!)
Click here for the membership links and welcome to the community! how2wrench.com/product-category/specials/
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench This is great for those truly quick questions you need answered and your help back will keep me going!
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way!
Admin How2Wrench.com
The thing with my elite 50 is I installed the pump new, previous owner removed it and now it’s giving er too much oil even backed out all the way makes no sense. Fills the air box with oil and smokes like crazy very frustrating any tips? I’d like to run the pump if I can I don’t want to be mixing for this single vehicle. Thanks!
Hit Shane up directly! I bet he has a solution!
We love sharing comments like this with Shane.
Thanks for sharing and the added value to our wrenching community. Keep them coming.
You rock for commenting! We will let Shane know! Want even more? Best $$$ you'll ever spend...Join this channel to get access to perks:
ua-cam.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE!
1. Smash the subscribe button (thank if already a sub!)
2. Have you seen our "UA-cam Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
3. High five donation: www.paypal.me/how2wrench
4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
My golf carts got oil injection Yamaha putting out plenty of oil but the engine you can tell is very dry not getting lubrication even though I've got it mixed in with the fuel also, my question is if there's fuel flowing out of the carburetor could it be given it so much fuel did it's washing down the Rings and making it want to seize Xtreme Wear.
For how many gass fills do you pour oil in the oil compartment for the injector? and how much? My scooter doesnt seem to have an analog gauge for that
How to adjust too much smoke coming out?
Yo! We just run the social media.....Want him to drop his wrenches and help you? He loves helping members and it is only $1.99 a month to join (more options if you really want to say thank you too) All member tech questions like this get directly forwarded to him every day! Here is how to get in!
* Join here: ua-cam.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
* Just looking to give us a high 5? Click here: www.paypal.me/how2wrench
* Is this an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/product/personal-tech-training-phone-facetime/
Note: If you are a channel member please reply back with your UA-cam handle. We will have a private member-only FB and web page coming he can directly do Q/A there! Thank you for being patient as our growth has blown up!
I have a 1972 cs3 and plan on removing the oil injection system what oil gas mix should i use
I would'nt want to guess...But here is what I have done. I start with a high quality oil (synthetic MC-1 is my fav) they recommend 50:1 and then I do alot of spark plug reading to determine if there are any concerns or adjustments needed. No mix and wide open or extended use in any range! Lots of checking to dial in to a mix for you. there are a lot of factors that could cause problems though...If you would like those list of detailed factors make a donation to our work and I'll take the time to to chat or write it out for you! Link below!
👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us!
Here is a way to support all the free videos.
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432
Details here: how2wrench.com/product/personal-tech-training-phone-facetime/
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way!
Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com
Where do the lines from the oil pump on top go on the carb
Let me try and see I can catch Shane to answer quick. He is currently at an extended stay in Japan training students this winter. We are just the social media team.
Due to his limited bandwidth on time and demand for help, we had to choose to forward any requests from members first and it is only $1.99 a month to join. All member tech questions like this get directly forwarded to him every day! Be mindful and honest that this is for "quick questions" that would serve you answers that can clearly be addressed. If it's a diagnosis need you'll need to use the one-on-one service.
Here is how to get in!
* Join here: ua-cam.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
* Just looking to give us a high 5? Click here: www.paypal.me/how2wrench
* Is this an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Have you seen our "UA-cam Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
If my oil pump is bad, is it less optimal to run premix? I don't want to repair it unless it is in fact more optimal. Will I have to change the jets on my carb if I choose to run premix full time?
Was that a zl in the background? Wicked bikes.
Don't see them to often anymore! Thank you for commenting. Want more benefits? Smash the subscribe button and bell! Want even more??? Join the channel:
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Join this channel to get access to perks:
ua-cam.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
Just want to say thanks quick to support us for this information and our work saving you money?
Give us a high 5 here: www.paypal.me/how2wrench
man...i just rebuilt a polaris trailboss 250. and i am so fkn paranoid that the oil pump isnt working... i took it apart while i had the engine off and cleaned it and just checked the little diaphram and o-rings. but the bike doesn't smoke.. i rode it for about 10 min and she seems to run great. but the engine is noisy. im hoping its just the pull start that is noisy but its hard to tell. the clear line that run from pump to maniold is full. but i cant tell..i like to see smoke on a dam 2 stroke. the plug looks perfect nice light brown. i pulled maniold off and its dry.. the piston looks ok and looks a little wet. idk i cant afford to fry this topened
If unsure if the oil pump is working on a fresh engine, your always better off adding a little premix to the first tank and then pulling the oil output line and watching it pump out...which that with bleeding as shown should ALWAYS be done anyway...make sense?
We sure love you taking the time to comment. Are you coming to the next live session?
There a few ways you could help keep this work going and stay connected with me personally.
1. The fastest and best thing you could simply do for us is hit that subscribe button…helps us creators more than you know!
2. Join this channel to get access to perks:
ua-cam.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
3. Give us a high 5 here: www.paypal.me/how2wrench
Keep Wrenching,
Shane Conley
Peoria, AZ USA
Follow us!
www.How2Wrench.com
www.Tools2Wrench.com
Facebook:
facebook.com/How2Wrench/
Instagram:
instagram.com/how2wrench/
I have a spree 50cc. How much oil is suppose to come out of the line at an idle?? It just just dribbles. Is that correct amount?
Yo! Want us to drop our wrenches and help you? We love helping subscribers…even on old videos! Help us grow friend! Here’s how:
1. Subscribe and let us know with a response. We will circle back when we can, it depends on member/customer demands and needs
2. We answer your questions EVERYDAY for channel members Join here: ua-cam.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
3. Give us a high 5 here: www.paypal.me/how2wrench and I run back to the computer!
4. Is this an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/product/personal-tech-training-phone-facetime/
So, you mentioned the importance of verifying the oil injection system but I'm not really seeing how to verify it, other than making sure there's not some bb jammed in the line?
Hi Joel,
Its a pretty old video and I'd have to watch it all to see or point out a time. I would think I would have mentioned that there are 3 steps to always do:
1. verify oil comes out the bleed screw (while buring air)
2. Verify oil is full in the lines to the carb/intake (and pumping)
3. Check how the spark plugs are burning...
👍 Thank you for taking the time to comment! It helps us!
Here is a way to support all the free videos.
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com
He was basically saying verify if the system as been manipulated. If you assume the oil injection system is doing its job and just throw regular gas in the gas tank you'll blow it up. He just wants you to know if you need to premix or not was the purpose of this vid.
So my 2 stroke doesn't have that. How could I add an oil tank, oil pump and oil vectors to my 66cc 2 stroke motorized bicycle chopper
Unlikely as the engine case is not built with it in mind...google for a kit and see what pops up...
We sure love you taking the time to comment. Are you coming to the next live session?
There a few ways you could help keep this work going and stay connected with me personally.
1. The fastest and best thing you could simply do for us is hit that subscribe button…helps us creators more than you know!
2. Join this channel to get access to perks:
ua-cam.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
3. Give us a high 5 here: www.paypal.me/how2wrench
Keep Wrenching,
Shane Conley
Peoria, AZ USA
Follow us!
www.How2Wrench.com
www.Tools2Wrench.com
Facebook:
facebook.com/How2Wrench/
Instagram:
instagram.com/how2wrench/
@@How2Wrench not sure when it where your next life session is. I am in San Antonio Texas and this build I am currently working on has been an interesting lesson in thinking outside the box and self fabricating things just out if parts and other stuff I've had lying around.the complete wiring harness is homemade. The jackshaft is all self-fabricated, as well as the bottom bracket with sealed bearings and the spindle for the pedal chainring. The exhaust I am currently in the design process to get the look I want and as close to a tuned pipe I can do myself out if a few hand tools. Nothing that I have fabricated has been created in a shop or with shop tools. This will be a very fun and nice running 66cc motorized bicycle once I get the rest of the fabrication finished. I thought I had heard about newer carbs that had the oil injection built in them?
@@charlesbyromhammiii2594 Sounds like a fun project. I'll try to find time and circle back to answer more but I have 80 member questions to get too today bud...
Have you ever seen the gear drive that drives the oil pump , 9 times out of 10 there plastic , if you want to rely on a plastic gear drive to lube your engine then good luck with that one , most guys with scooters that are modified just delete the pump and run premix , heaps better , much simpler , less stuff hanging off your motor ie oil lines , oil tank and pump drive and your motor gains a little more power from not having to drive that stupid pump.
Simon Sullivan street bikes are different there not exposed to mud and dirt like a atv or dirt bike is I personally just don't trust oil injection.
Wonder how many people blame the pump for blowing up engine when they just forgot to refill the oil tank
True story...🤣
We sure love you taking the time to comment. Are you coming to the next live session?
There a few ways you could help keep this work going and stay connected with me personally.
1. The fastest and best thing you could simply do for us is hit that subscribe button…helps us creators more than you know!
2. Join this channel to get access to perks:
ua-cam.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
3. Give us a high 5 here: www.paypal.me/how2wrench
Keep Wrenching,
Shane Conley
Peoria, AZ USA
Follow us!
www.How2Wrench.com
www.Tools2Wrench.com
Facebook:
facebook.com/How2Wrench/
Instagram:
instagram.com/how2wrench/
That’s a scooter, not a moped
What would we possibly do without you...:)
So....