by far my favorite solution for unloading - incredibly compact, handles empty boxes like a champ, and is so fast!!! I featured your work in a recent item sorting system, thanks for your contribution!
I tested many other 4x hopper speed systems but all were broken and very unreliable but your DESIGN specifically earned my respect thank you so much also- Subscribed.
Just built it. So happy it works! I also added another regular input chest which funnels items in the same water stream as the unloader does. Hands down best storage I've ever had! This guy is the goat!
Works on bedrock 1.20 but you put a piece of redstone dust on a solid block under the torch so that the dust turns on the block under the repeater aswell, repeats cant power pistons like that in bedrock
just messed around with this design in creative for a few hours using what i learned in this vid, and i figured out that with a larger, less practical hopper-minecart pyramid, you can even unload at up to 12x hopper speed!
Hi, great system, however i'm having an issue. The final hopper that collects the shulker box makes the bottom layer of minecart hoppers unable to pick up items for the top row, so for a full shulker box, the system just shuts off after 5*4 stacks. I'm (almost) confident I've recreated the design correctly. As soon as I remove the s.b. collection hopper, the system works (but the s.b. ends up in the bottom double chest like the other items).
@@Dutfer I have a similar situation. It doesn't matter if the shulker box hopper is there or I just let the box fly out. The system pulls EXACTLY 24 items from the box then pops it. I don't think the alignment is wrong... I mirrored what you did fairly carefully. Comparator is in subtract mode.
i used the tick step and freeze command together and came to the conclusion that the top repeater being set to 2 instead of 3 ticks was the solution. lmk what you think
Well, hello there ( General Kenobi). Just did it, got a problem on 1.20.2 though. the full shulker box get emptied but does not go into the hoppers , instead get sucked by the hopper minecart and end up getting into the lower chest. Anyone trying this build and having the same issue? Is it the version, or am i missing something? =/
this is an older build that i havnt checked in a while, are all timings correct? if the activator rails isnt being powered at the correct time it causes this issue.
@@Dutfer dunno if resolved, but by putting more things into the shulker box, it did go the right way afterwards. i'll check the powered rail activation next time. thank's for the reply! :)
@@Dutfer After a certain number of minecarts, the 6 hoppers below them will be bottlenecks though? Or actually the 4 hoppers that push into the chest at the bottom.
@@ThundersLeague yes they will. I have done some testing in another world for adding more minecarts but I just became to unreasonable. Also in a situation like for a storage system, it will be more convenient to just build more than one unloaded if speed becomes an issue. Hope this helps! :)
Ok I figured it out. You explain it exactly the opposite way you're supposed to do it here - 2:05 The same side you set up the piston, and shove the iron bar into place, that's the side the hoppers go. You show it the opposite way here when building.
With 1.19.3 (or at least i tried to build it with this version) I was not able to push the glass through the iron bars. I tried it with several materials. Is there another possibility to get the activator rail onto something? Has anyone else experienced this?
the shulker goes in the same place as the items, this frustrates me a lot because I'm literally burning the surplus, so I lost a few shulkers in the testing process, it doesn't matter that much anyway I have a farm of shulkers so I have plenty, but this it shouldn't happen
@@Dutfer That apparently solved the problem, the only drawback is that sometimes out of 10 shulkers I lose 1 or 2 hahaha. Ill see what I do or if I modify the design a bit to avoid this. Thanks for answering!
@@Dutfer Not at all. It's the minecarts on the 6 hoppers. There is no way to move them.. and I saw them move into place the moments the items started flowing. Default behavior on paperspigot... maybe that's why?
@@Dutfer Issue was completely fixed when I aligned the minecarts first with the iron bar push, then broke it and used the glass block. Didn't realize that was neccessary.
If the items are getting stuck in the top set of minecarts, then the bottom minecarts are aligned on the wrong side. Sorry if I’m misunderstanding the question but I think that might fix it :)
by far my favorite solution for unloading - incredibly compact, handles empty boxes like a champ, and is so fast!!! I featured your work in a recent item sorting system, thanks for your contribution!
I tested many other 4x hopper speed systems but all were broken and very unreliable but your DESIGN specifically earned my respect thank you so much also- Subscribed.
Great system, thank you so much :) Now I can finally feed my super smelter fast enough.
Thanks for showing of this good Shulkerbox unloader! I use this Shulkerbox Unloader now in my base and it works very good! :D
Fantastic design, thank you so much!
Works perfectly in 1.17.1! Thanks :D
Really good, works in 1.19 and is super fast. Earned a sub
does it actually work
Worked on 1.20.1 (didnt test it for consistency yet)
how have you only got 59 likes on this? this is brilliant! im going to study how you do this!
actually amazing and works well on online SMP servers 👍
Great tutorial
Amazing bro 👏
This was a very good turtorial
perfect. thx man!
Works nicely on an 1.18.1 server. Thanks!
Just built it. So happy it works! I also added another regular input chest which funnels items in the same water stream as the unloader does. Hands down best storage I've ever had! This guy is the goat!
You are my HERO thank you!
Very underrated
Works on bedrock 1.20 but you put a piece of redstone dust on a solid block under the torch so that the dust turns on the block under the repeater aswell, repeats cant power pistons like that in bedrock
works perfect for the bartering farm
java 1.17.1 realms
Bottom minecarts don't seem to stay in place, they all group up in the middle after being away for a bit.
Are you dropping them in the way I showed? Otherwise are you using more minecarts? These might be the issue otherwise I’m not really sure
just messed around with this design in creative for a few hours using what i learned in this vid, and i figured out that with a larger, less practical hopper-minecart pyramid, you can even unload at up to 12x hopper speed!
Hi, great system, however i'm having an issue. The final hopper that collects the shulker box makes the bottom layer of minecart hoppers unable to pick up items for the top row, so for a full shulker box, the system just shuts off after 5*4 stacks. I'm (almost) confident I've recreated the design correctly. As soon as I remove the s.b. collection hopper, the system works (but the s.b. ends up in the bottom double chest like the other items).
Is the top comparator in subtract mode? Otherwise it could be an issue of aligning the bottom most minecarts on the wrong side of the build.
@@Dutfer yup it was the alignment of the minecarts that was wrong, i noticed the difference after a few times replaying the vid ah ah. Thanks!
@@Dutfer I have a similar situation. It doesn't matter if the shulker box hopper is there or I just let the box fly out. The system pulls EXACTLY 24 items from the box then pops it. I don't think the alignment is wrong... I mirrored what you did fairly carefully. Comparator is in subtract mode.
@@Dutfer Nevermind. Instead of setting to the number of ticks delay you indicated I clicked the repeaters that many times. DOH!
When I place in the dispenser more than one shulker box the sistems breaks down and dosen't change shulker, any solutions ?
Worked on 1.20.1 (didnt test it for consistency yet)
this entire system is built for being fast and small lmao
i have a problem in 1.20.4 where the system breaks the first shulker straight away but after that it continuous as shown in the video
it appears that the sticky piston pushing the observer activates twice on the first shulker
i used the tick step and freeze command together and came to the conclusion that the top repeater being set to 2 instead of 3 ticks was the solution. lmk what you think
however this stops empty shulkers from being unloaded. which i guess is fine if careful
Well, hello there ( General Kenobi).
Just did it, got a problem on 1.20.2 though. the full shulker box get emptied but does not go into the hoppers , instead get sucked by the hopper minecart and end up getting into the lower chest. Anyone trying this build and having the same issue? Is it the version, or am i missing something? =/
this is an older build that i havnt checked in a while, are all timings correct? if the activator rails isnt being powered at the correct time it causes this issue.
@@Dutfer dunno if resolved, but by putting more things into the shulker box, it did go the right way afterwards.
i'll check the powered rail activation next time.
thank's for the reply! :)
can u put more minecarts in for even faster unloading?
Yes you can! Add as many as you want
@@Dutfer After a certain number of minecarts, the 6 hoppers below them will be bottlenecks though? Or actually the 4 hoppers that push into the chest at the bottom.
@@ThundersLeague yes they will. I have done some testing in another world for adding more minecarts but I just became to unreasonable. Also in a situation like for a storage system, it will be more convenient to just build more than one unloaded if speed becomes an issue. Hope this helps! :)
1.18.2 the top layer of minecart hoppers aren't emptying...
Ok I figured it out. You explain it exactly the opposite way you're supposed to do it here - 2:05
The same side you set up the piston, and shove the iron bar into place, that's the side the hoppers go. You show it the opposite way here when building.
With 1.19.3 (or at least i tried to build it with this version) I was not able to push the glass through the iron bars. I tried it with several materials. Is there another possibility to get the activator rail onto something? Has anyone else experienced this?
You mean the Glass at 3:10? He removed the Iron bar it at 2:51.
@@lukas0999 Thanks, it seems, i tried it wrong. I need to check it again.
@@lukas0999 I missed the removing of the iron bar. Next time I need to look a bit better
@@lukas0999 Thank's man! ♥
the shulker goes in the same place as the items, this frustrates me a lot because I'm literally burning the surplus, so I lost a few shulkers in the testing process, it doesn't matter that much anyway I have a farm of shulkers so I have plenty, but this it shouldn't happen
Pardon the late reply, but make sure that the minecarts are pushed into the blocks correctly. Even the slightest misalignment can screw it up.
@@Dutfer That apparently solved the problem, the only drawback is that sometimes out of 10 shulkers I lose 1 or 2 hahaha. Ill see what I do or if I modify the design a bit to avoid this. Thanks for answering!
The minecarts move around when the items start flowing.
Umm... did you bump them when testing? And easy fix is to just drop the minecarts back into place as seen in the tutorial. :)
@@Dutfer Not at all. It's the minecarts on the 6 hoppers. There is no way to move them.. and I saw them move into place the moments the items started flowing. Default behavior on paperspigot... maybe that's why?
@@Dutfer Issue was completely fixed when I aligned the minecarts first with the iron bar push, then broke it and used the glass block. Didn't realize that was neccessary.
When I am placing the hopper at 6:04 the hopper minecart will stop what is the Problem here?
What do you mean by stop? It stops pulling items?
@@Dutfer yes i am playing at the version 1.17.1
Is it the top set of hopper minecarts or the lower ones? If it is the bottom ones then they are probably not lined up properly
@@Dutfer no Its the top one
If the items are getting stuck in the top set of minecarts, then the bottom minecarts are aligned on the wrong side. Sorry if I’m misunderstanding the question but I think that might fix it :)
works in 1.19+
it does?
Ppl not clicking like button on this are being straight lazy and unappreciative 😂 impossible not to like