Yamaha Receiver Reset

Поділитися
Вставка
  • Опубліковано 28 лис 2024

КОМЕНТАРІ • 171

  • @Repair2Renew
    @Repair2Renew  2 роки тому +5

    ✅ FAQ - Frequently asked questions (Read all Questions and Answers)
    ▶ How do I put in "diagnostics mode" or "clear system protect"
    📖 IF DOES NOT TURN ON:
    (1) Unplug, wait 10 sec, plug back in
    (2) Hold down tone and straight buttons
    (3) Then push the power button (BUT KEEP HOLDING TONE & STRAIGHT FOR EXTRA
    SECOND) If this does not work, you will have to take to an authorised repairer
    ▶ I do not have a "Tone" or "Straight" or "Other" button?
    📖 You have have to do some googling, to find information relevant to your model
    But try "Tone" and "Info" at same time, whilst holding the "Power"
    ▶ How do I FACTORY RESET?
    📖 Go to this video ua-cam.com/video/N995AhmH3EI/v-deo.html
    ▶ I have done a FACTORY RESET and lost a function (bluetooth, remote, etc)
    📖 Try to update the firmware, google "firmware update" and then the "model number"
    Checkout OWNERS MANUAL on the Yamaha website.
    ▶ How can I fix my YAMAHA?
    📖 If you are not a technician or engineer, take it to your Yamaha service centre
    ▶ I do not have a Yamaha service centre near me !
    📖 Take your Yamaha to your an electronics repairer.
    ▶ Can you help me fix my Yamaha Receiver?
    📖 Most of the time, unfortunately not, unless I have the receiver in front of me.
    Take it to an authorised repairer or check OWNERS MANUAL on the Yamaha website.
    ▶ My Yamaha keeps on tripping !
    📖 It has a major problem that need rectification. Take it to an authorised repairer
    ▶ Where do I get SERVICE MANUAL?
    📖 Go to elektrotanya.com/keres
    Then search for model number
    ▶ Where do I get the OWNERS MANUAL?
    📖 Go to usa.yamaha.com/support/manuals/index.html
    Then search for model number
    ▶ I am have a problem operating my Yamaha, can you help me?
    📖 Download the owners manual
    Go to usa.yamaha.com/support/manuals/index.html
    Then search for model number
    ▶ My yamaha just goes "click"
    📖 Take it to an authorised repairer
    ▶ My Yamaha RX-V ??? receiver just stopped producing sound whilst watching TV, or listening
    to radio, etc
    📖 I would love to help you, but unless the receiver is in front of me, it is hard to diagnose.
    Take it to an authorised repairer or check OWNERS MANUAL on the Yamaha website.
    ▶ Didn't work on RX-V ???. Any ideas?
    📖 I would love to help you, but unless the receiver is in front of me, it is hard to diagnose.
    Take it to an authorised repairer or check OWNERS MANUAL on the Yamaha website.
    ▶ I am taking a voltage measurement on my Yamaha, is this correct? can you help me !
    📖 If you are not a technician or engineer, take it to your Yamaha service centre
    ▶ My yamaha receiver has any one of multiple problems or faults
    📖 I would love to help you, but unless the receiver is in front of me, it is hard to diagnose.
    Take it to an authorised repairer or check OWNERS MANUAL on the yamaha website.
    ▶ You just gave me a "thumbs up" and a "heart", but did not answer my question?
    📖 Answer is in the FAQ's in description of this video or pinned to the top in comments.

    • @7071t6
      @7071t6 Рік тому

      mate great upload, but i think ours is blown something inside it, tried everything as you have mentioned, but no lights light up on the screen and also noticed that the arc said it was active via the tv, but no sound etc, had a party just 3 days ago and the system shut down the red light keeps flashing and no matter which comb of buttons i press it will not start up working as it should etc, but many thanks for the info and keep up the great work your doing champ. ❤❤🙌🙌✌✌👍👍😎😎

    • @akshaykumar-bw4si
      @akshaykumar-bw4si Рік тому

      I think my Yamaha RXV667 is in protect mode because it is not Switching on

    • @pwbrad
      @pwbrad 4 місяці тому

      How to change from Hall effect

  • @danagerling8772
    @danagerling8772 2 роки тому +3

    So glad I found your video! My husband was trying to set up his new remote when the HDMI output stopped working. He was ready to just buy a new receiver, but I was not. I found your video on a Google search, and it worked like a charm! The HDMI output works now and it saved us from buying a whole new receiver. Thanks!

  • @jimwright3534
    @jimwright3534 3 роки тому +4

    Thank you for posting - My
    HDMI output stopped working and this reset fixed the issue. Sincere Thanks!

  • @TheHaikarate
    @TheHaikarate 2 роки тому +1

    Awesome! I tried everything to fix my hdmi out port and nothing worked. This fixed the problem and cured my headache!

  • @russluck4290
    @russluck4290 9 місяців тому

    Thanks, my RX-683 wasn't responding anymore. This reset worked and Bluetooth pairing worked again right away. ❤

  • @getinmybele3087
    @getinmybele3087 Рік тому +2

    Thank you so much. My receiver was turning on by itself and connecting to a Bluetooth device that was not mine, and this is the only way I found to be able to fix it.

  • @neilspiring1498
    @neilspiring1498 Місяць тому

    Just bought a RX V583 ..used of course ,
    I am having trouble connecting to Bluetooth and Music cast.
    Is it recommended to factory reset device to help with these 2. activities
    Your thoughts are appreciated

  • @jtimleck
    @jtimleck Рік тому +3

    Thanks! Still helpful in 2022!

    • @Repair2Renew
      @Repair2Renew  Рік тому

      Glad it helped!
      Glad it is still relevant.

  • @stuartbaker123
    @stuartbaker123 4 місяці тому

    Thanks. Is this intended to restore remote? Power button not working. Other buttons are…

  • @iksralquyuud
    @iksralquyuud 2 роки тому +2

    Thanks anyway, I am sure it helped many others but did not get my HTR-3066 to produce audio (I was just using it with speakers as an amp for sound from laptop), but the reset got the 'Decoder OFF' to disappear from the display...Have a feeling it must be a connection problem inside...oh well, I did get it second hand and had acouple of years' use out of it. Cheers mate.

  • @mikemorris4877
    @mikemorris4877 Рік тому +2

    I am having an issue with my Yamaha receiver not picking up my remote. It just randomly stopped on its own. Remote works IR light illuminates when the buttons are pressed. Receiver is just not picking it up any suggestions?

  • @jonastraxler2714
    @jonastraxler2714 4 місяці тому

    Thank You so much! Worked on first try! You're a lifesaver!

  • @djram777
    @djram777 5 місяців тому +1

    thank you again and again, time after time my receiver lost SUBWOOFER and I need to reset it and after going to the page BACKUP\RESTORE and restoring my settings. Simple restore doesn't helps, need to reset

  • @kevinblair8832
    @kevinblair8832 Рік тому +1

    Thanks... Works a charm.... My amp kept.. Self max volumimg. And lost all. My sound and picture modes

  • @victorclare9376
    @victorclare9376 Рік тому

    Hi thanks for all your info. i have a problem with my Yamaha RX-A680. MY HDMI OUTPUT IS NOT WORKING. NO SIGNAL . Do you have any solution for this problem. thanks victor

  • @A2RYA
    @A2RYA 2 роки тому +1

    Thank you so much. I have a rx-v683 and out of no where all the HDMI outputs just stopped displaying video, only audio was coming through. I can now continue playing my PlayStation 5 haha. Thank you so much.

  • @jimmyt54me
    @jimmyt54me 5 місяців тому

    Yamaha RX-V675 Before I watched this video from Shane, I was seeing over 150+ “DECODER OFF”errors, watched this video, followed directions, but it’s back to numerous dropped audio signals. Very frustrating! Never used to do this! (I checked TOS, It’s working) Any other bright ideas, to help this frustrating problem? What’s the point in having a receiver, only to not get the constant 7.2 surround experience? Back to Samsung TV Speakers! Do I need to do this “reset,” more than once?Thanks, for any help!

  • @ren0901
    @ren0901 2 роки тому +1

    Thanks so much - needed to reset a Yamaha receiver after getting an updated DISH set box, which took control of the receiver and denying other devices (Apple TV, BD player). Did the reset and ran the setup - everything back to working order

  • @StetsonDoggett
    @StetsonDoggett 2 роки тому +1

    Amazingly helpful, thank you!

  • @TheBinaryWolf
    @TheBinaryWolf 2 роки тому +2

    Thanks for a clear and concise presentation. Excellent.

  • @thirteen2k
    @thirteen2k Рік тому +1

    I ended up here looking for support on my Yamaha R-N303 that was stuck with a flashing standby light because it was in protection mode. I found this guidance elsewhere but it took a while so I wanted to share here as well.
    -----
    Starting Self-Diagnostic Function in the protection cancel mode
    If the protection function works and causes hindrance to troubleshooting, cancel the protection function by the procedure
    below, and it will be possible to enter the self-diagnostic function mode. (The protection functions other than the excess
    current detect function will be disabled.)
    **** While pressing the “PRESET < ” and “BASS +” keys, press the (Power) key to turn on the power and keep pressing
    those 2 keys for 3 seconds or longer. *****
    The self-diagnostic function mode is activated with the protection functions disabled.
    In this mode, the “SLEEP” segment of the FL display flashes to indicate that the mode is self-diagnostic function mode with
    the protection functions disabled.

  • @pricelessone100
    @pricelessone100 2 роки тому +1

    Thanks! Should all of the hdmi ports be empty when doing this reset? all of my hdmi ports say Set Top Box 1, 2, 3 or 4 and only the Firestick, which is plugged into HDMI 4 will work, even when its showing HDMI 1, 2, 3 etc...

  • @danielm9557
    @danielm9557 2 роки тому +1

    Took a few times but did work on DVR S60 and fixed Subwoofer terminal not working. Thank you.

  • @mariasaycon4051
    @mariasaycon4051 Рік тому +1

    Thank you for this video. My Yamaha receiver is fixed.

  • @DeeZer-ws6rr
    @DeeZer-ws6rr Рік тому +1

    MERCI 🙏 INFINIMENT.. Grâce à vous tous fonctionne à nouveau. 👍

  • @The007astig
    @The007astig Рік тому +1

    My sub is not working,
    The reciever is used 6290
    So if I reset my reciever would it help?

  • @rayburtis6163
    @rayburtis6163 4 місяці тому

    Can u tell me why my subs r not working after factory reset and what buttons to push to fix it please

  • @63Arnast
    @63Arnast 2 роки тому +1

    Nice will have to try that as i have an issue with my LH speakers :( . When i turn it on only the center, RHF, RHR and bass work but nothing comes out of the LHF or LHR and i've tested the speakers and connections including sticking another working speaker in with no result.
    I tried that on my HTR 6230 and it doesn't do anything :(

  • @ivanyamanaka26
    @ivanyamanaka26 2 роки тому +2

    Thank you for posting pressing! "-" on my remote didn't release the memory guard so this was the only other way, the only difference on mine was it would go blank after hitting the 2 buttons then I needed to press power then proceed on.

  • @nicovermeulen4885
    @nicovermeulen4885 2 роки тому +1

    I have a RX-V479 (HTR 4080) and I have the issue that the sound programs are randomly changing.
    I wanted to perform a reset but the buttons on the front are not responing. After taking out the plug and putting it back it, for a while I can use the buttons on the front, however, perform the reset still doesnt work. When I hold the Straight button and press on Power it just simply powers on. I really think a reset would do the trick, but I cannot manage it.

  • @hugosandoval501
    @hugosandoval501 Рік тому +1

    Hello , how to reset factory Yamaha rxv 992... please

  • @mrobvious1100
    @mrobvious1100 Рік тому

    I can't quite figure out how to reprogram my Yamaha receiver remote to work completely with the Yamaha receiver. It was working fine then about four months ago we lost the remote somewhere in the house. My daughter miraculously found it and brought it back to the living room. Now I can use a lot of the buttons like power and the yellow scene buttons Etc but the volume up and volume down does not move the stereo big knob so I can't change the volume level on my Yamaha receiver any ideas how to reset the remote or repair it with the receiver so all the functions work

  • @johnbravo9052
    @johnbravo9052 Рік тому

    I have a RX V 2300 and the right side of the Main Speakers do not produce sound. I have to plug my main speakers into the left side connections which works perfectly. Also, I don’t get full sound from my rear/surround speakers. Any ideas?

  • @youruinedmyrecordman2507
    @youruinedmyrecordman2507 Рік тому +1

    I thought a power surge fried my receiver. Excellent video.

  • @keithabeynayake1
    @keithabeynayake1 2 роки тому +1

    Hi there. I have an RX V675. It works, I have my Firestick running through it and that works. The power light is on as well. But the digital screen is not working. Any ideas on solving that? Thanks.

    • @Repair2Renew
      @Repair2Renew  2 роки тому

      You will have to tale it to your Yamaha authorised repairer.
      Sounds like an issue with your display PCB or power to the display PCB

  • @GonzaloContrerasS
    @GonzaloContrerasS 3 роки тому +2

    Hello, please, did you have the instructions on how to reset a YAMAHA RECEIVER RX-450 RS. It got stuck.
    Thanks, greetings from Chile

    • @Repair2Renew
      @Repair2Renew  2 роки тому

      Try this www.manualslib.com/manual/340472/Yamaha-Rx-V450.html?page=66
      Otherwise you will have to google.

    • @GonzaloContrerasS
      @GonzaloContrerasS 2 роки тому

      Hello, the Yamaha Model I am talking about is the "Yamaha RX-450 RS", can you please give me a help !! Thank you

  • @treiber671988
    @treiber671988 5 місяців тому

    Any idea why my Yamaha RXV-3300 will only play audio via dsp mode and not stereo mode.

  • @billjohnson679
    @billjohnson679 2 роки тому +1

    I have an RX V-620. It has been stored (unplugged) for several years. When I press the power button, the receiver comes on for about a second then shuts down. Is there a reset function or perhaps a battery or capacitor that needs replacing?

    • @Repair2Renew
      @Repair2Renew  2 роки тому

      Checkout the FAQ's Bill
      But your Yamaha turn's off, because the protection system has been tripped due to fault.
      Take it to your nearest Authorised dealer or Qualified electronics repairer.
      Do not do it yourself !!!

  • @godwinkipokola
    @godwinkipokola 2 роки тому +1

    This is a holly video, it help me a lot

  • @violetaromero2493
    @violetaromero2493 3 роки тому +1

    Thanks for your video I was able to reset my Yamaha RX-A830 !!!

    • @Repair2Renew
      @Repair2Renew  3 роки тому

      Glad it helped Violeta, great to see ladies getting involved in Tech.

  • @northlander4370
    @northlander4370 Рік тому +3

    Not working

  • @billhamilton7524
    @billhamilton7524 3 роки тому +1

    Thank you much,,,got this unit the 385 from my brother and FM didn't work till after reset ,,works now but still can't get bluetooth to work ,,can you help ???
    THANKS

    • @Repair2Renew
      @Repair2Renew  3 роки тому

      Great to see you got it working.
      If bluetooth is not working I would try a firmware update.
      Just follow the instructions
      au.yamaha.com/en/support/updates/rx-v385_htr-3072.html

  • @johndoris1992
    @johndoris1992 Рік тому +1

    My unit and remote are like new. Moved 2 years ago and am now getting my system going. Left batteries out of the remote for the 2 years. When I fired up the system, the remote fails to communicate with the receiver. Yes, the batteries are new. I did do a reset on the remote which doesn't appear to do anything. Any ideas? Thanks. Will a reset on the receiver help? I haven't done it yet as the system is all hooked up. The equipment did sit for two years but was protected. It is the RX-371. Unit is working, just without the remote.

    • @Repair2Renew
      @Repair2Renew  Рік тому

      A reset may fix the problem.
      It would be the next thing I would try.

    • @johndoris1992
      @johndoris1992 Рік тому

      @@Repair2Renew Did that. After further research, it appears that leaving the batteries out for an extended time can erase the codes. bought a new remote and it worked fine. resetting the unit caused other slight issues which since have been corrected. Thanks for your input. As these remotes appear to be used in other units, and the fact that there are many codes to begin with, would you know the proper code for the RX-V371 for me to try to salvage the old remote? Unit is now working great. Thanks again,

    • @Repair2Renew
      @Repair2Renew  Рік тому

      @@johndoris1992 Wow thats seems a bit wacky, the codes should not be kept in any volitile type memory. Not sure how to salvage old remote.

  • @vinylcabasse
    @vinylcabasse 2 роки тому +1

    how does one go about doing this on one of the newer models, the aventage RX-A6A specifically? seems that most of these buttons are no longer present on the front

  • @WhereIsHex
    @WhereIsHex 2 роки тому +1

    Thank you so much ! it helped and i needed to restart im subscribing!

  • @JessicaSmith-ii1ix
    @JessicaSmith-ii1ix 7 місяців тому

    Hello I had an issue with my av receiver. Sleep mode always blinking. Once I reset it the button straingt and the power button not continue to the advance seting. Please help me to fix this. Thank you

  • @mattcho04
    @mattcho04 2 роки тому +1

    Thanks for the video!👍🏼👍🏼

  • @rajadhillon3454
    @rajadhillon3454 Рік тому +1

    Please help me how to fix sound issue as it keep cutting off while watching projector movies on Netflix. Problem coming on Netflix and Amazon when watch movies not on UA-cam that is fine. It’s YHT 1840

    • @Repair2Renew
      @Repair2Renew  Рік тому

      Due to the high volume of comments, we have put a FAQ in the comments.
      The FAQ pinned at the top! You should find your answer in this FAQ within comments or the video description.
      Cheers R2R

  • @jarnomansikka4315
    @jarnomansikka4315 Місяць тому

    Hi, I just made this to my Yamaha HTR-3064. And now I cant stream music, Netflix etc anymore? What I can do? Before I made the reset, there was no problem with those. Now TV doest find any signal with Yamaha.

  • @dfrankcom
    @dfrankcom 3 роки тому +1

    Thanks for the video!

  • @brecht2006
    @brecht2006 2 роки тому +1

    Hello, i have a rx-397 receiver. Not a av receiver.
    Can i reset the mine to? There is no straight button on this one.

    • @brecht2006
      @brecht2006 2 роки тому +1

      Found it. For those ho have the rx397 , make sure it is on stand-by. Press a-b-c-d button and then on the on button. Press a-b-c-d button to chouse your menu and press again the on button to comfirm.

  • @aquaficialdetlef2296
    @aquaficialdetlef2296 Рік тому

    Thanks, this fixed my 5.1ch speaker problem.🎉

  • @LordofKings-Raj
    @LordofKings-Raj Рік тому

    My Yamaha HTR 2064 having very low sound all 5 speakers except wofferr!!!!
    What's the exact problem?
    Kindly guide....
    Thanks for sharing information
    India.

  • @couldneverbeme1
    @couldneverbeme1 3 роки тому +1

    What do you so after you reset the Yamaha

    • @Repair2Renew
      @Repair2Renew  3 роки тому

      You reconfigure your Yamaha. You may want to setup scenes, radio stations, YPAO, equilizer settings, etc.

  • @ytanonymous
    @ytanonymous 3 роки тому +1

    You saved my life. Thank you!

  • @samanthacoats5992
    @samanthacoats5992 2 роки тому +1

    My reciever is flashing its light due to my toddler repeatedly turning it on and off pretty sure it went into protection mode I don't have a tone control on my actual system and it's all touch screen besides select enter, the scene buttons 1234, return, menu, zone, pure direct I have a yamaha receiver rxv4a is there anyway to turn it off

    • @Repair2Renew
      @Repair2Renew  2 роки тому

      Check FAQ in description, also pinned to top of comments

  • @bells1969
    @bells1969 2 роки тому +1

    Many thanks a big help

  • @V_______K
    @V_______K Рік тому +1

    Help me find the firmware for the EEPROM chip r1ex24128asas0a. I can not enter the engineering menu. Standby voltage is present. yamaha rx a810. I will be very grateful.

  • @somethingcool1143
    @somethingcool1143 2 роки тому +1

    Hey I have a yamaha rx-v377 even when I reset it I still got no sound and it goes directly to the ypao setup(I don't have it) is there any way to bypass or help me

    • @Repair2Renew
      @Repair2Renew  2 роки тому

      I would try re-flashing firmware, otherwise take it to your local repairer.
      au.yamaha.com/en/support/updates/rx-v3077_en.html

  • @johnpearce8657
    @johnpearce8657 3 роки тому +1

    Awesum - Thank You so much for this brilliant video on doing a reset on an Yamaha Amp - I have 2 both with Video issues - it's fixed 1 , just like that. I'm running to do the other now .... Th a n k s ....

  • @hulashodas1777
    @hulashodas1777 8 місяців тому

    Thank You 👍💪. Dziękuję pozdrawiam ✌️

  • @cheekydarky1
    @cheekydarky1 2 роки тому +1

    Hi there, my Yamaha AVR RX-V681 stopped producing sound whilst watching TV, any ideas, won't produce sound either with Spotify.

    • @Repair2Renew
      @Repair2Renew  2 роки тому +1

      You will have to take your yamaha to an Authorised repairer
      Please check the FAQ's in the description of this video.
      Otherwise I will be answering the same question over and over and over and over and over again.

    • @cheekydarky1
      @cheekydarky1 2 роки тому

      @@Repair2Renew Calm down mate, have you not had your meds today?

    • @ev4me2
      @ev4me2 2 роки тому

      @@cheekydarky1 Yes I have my meds today, but my hair still does not grow back :)

    • @cheekydarky1
      @cheekydarky1 2 роки тому

      @@ev4me2 Well I can't help you out with that one

  • @trianaarista257
    @trianaarista257 6 днів тому

    Thank you so much

  • @AZee-t7f
    @AZee-t7f 20 днів тому

    Why won't my rx v861 reset? I do press straight then power but it just goes on as normal with resetting? Pls help 🙏

  • @noelvlog5580
    @noelvlog5580 2 роки тому +1

    How to reset Yamaha av receiver rx v495 it has no control botton

  • @gerretparks5176
    @gerretparks5176 2 роки тому +1

    That seems to be working for a lot of people, but my receiver has no buttons on the front it's that flat flush look on the new RX v4a, therefore I have no straight button or any buttons to speak of to press for reset....argh

  • @IITwaleDOCTOR
    @IITwaleDOCTOR 2 роки тому +1

    Does this reset downgrade firmware to original version?

  • @AlexLadroma
    @AlexLadroma Рік тому

    Thank you!

  • @arcenziel2620
    @arcenziel2620 Рік тому

    What's this straight button you're talking about? I see no straight button on my Yamaha rx-v800.

  • @mariaedward7671
    @mariaedward7671 Місяць тому

    How fo i reset a yamahs cx a5100 recever

  • @sibirskiyvalenok5973
    @sibirskiyvalenok5973 Рік тому +1

    RX-A810 please.

  • @Aussieaudio
    @Aussieaudio 2 роки тому +1

    I see you’ve helped many people but sadly I think my AVR has gone to audiophile heaven

    • @Repair2Renew
      @Repair2Renew  2 роки тому

      Try taking your AVR to a local electronics repairer, if you want keep it for an extra couple of years. Otherwise you might have to go down to your local JB Hifi and pickup a new one?

  • @kiya3_996
    @kiya3_996 Рік тому

    I have a weird issue. When my receiver is turned on, you hear low sounds of the radio. Everything works fine but it can be distracting if you’re watching a suspenseful show where the sound is low. I did the factory reset and firmware update but I still hear the noise. Please help!

  • @SelfHealingGod
    @SelfHealingGod Рік тому +1

    RX - V440 don't have a straight button.

    • @Repair2Renew
      @Repair2Renew  Рік тому

      Due to the high volume of comments, we have put a FAQ in the comments.
      The FAQ pinned at the top! You should find your answer in this FAQ within comments or the video description.
      Cheers R2R

  • @mariod7473
    @mariod7473 Рік тому

    Thank you, that fixed my screwed-up Bluetooth....

  • @tweeter05ify
    @tweeter05ify Рік тому

    I have no straight button or tone control button rx-v630

  • @mikehlee69
    @mikehlee69 2 роки тому +1

    Didnt work on v663. Any ideas?

    • @Repair2Renew
      @Repair2Renew  2 роки тому

      You will have to take your yamaha to an Authorised repairer
      Please check the FAQ's in the description of this video.
      Otherwise I will be answering the same question over and over and over and over and over again.

  • @kennethcafasso
    @kennethcafasso Рік тому +1

    Mine is rocking 😎

  • @stewartsstewart1089
    @stewartsstewart1089 9 місяців тому

    Hello my Yahama HTR 5890 won't reset my zip code is 98684 any suggestion? I am an authoized printer tech and engineer.

  • @dmkb71
    @dmkb71 2 роки тому +1

    After switching on, the various program modes run one after another erroneously and this can be seen on the receiver's display. I tried the factory reset by advance setup, but I'm stuck here with the remote id menu and the reset menu is not appearing, so I can't even access the reset option. My model is yamaha htr 3072.

    • @Repair2Renew
      @Repair2Renew  2 роки тому

      Check you yamaha documentation first.
      www.manualslib.com/products/Yamaha-Htr-3072-9208042.html
      I would do a firmware update on your yamaha, google up your "yamaha model number" and "firmware update"
      Then follow the instructions

    • @dmkb71
      @dmkb71 2 роки тому

      @@Repair2Renew dear Sir, even the firmware update did not work.

    • @Repair2Renew
      @Repair2Renew  2 роки тому

      @@dmkb71 Sorry MKB, you will have to take it to a repairer.

    • @dmkb71
      @dmkb71 2 роки тому

      @@Repair2Renew thank you for your suggestion. I will be going to a service center very soon.

  • @johnpearce8657
    @johnpearce8657 3 роки тому +1

    MBK Maroubra Rocks

  • @slimpark7504
    @slimpark7504 Рік тому +1

    Anyone have a Yamaha R-S202? How do you reset? mine keeps tuning off after I power it up 3 sec and nothing

  • @connicamilleisgaard6639
    @connicamilleisgaard6639 Рік тому +1

    It dosen,t seem to work for me??.🤔

  • @luca.f03
    @luca.f03 2 роки тому +1

    Tanks

  • @MotivationPassionAction
    @MotivationPassionAction 2 роки тому +1

    RX V440 I don't have a straight button

    • @Repair2Renew
      @Repair2Renew  2 роки тому

      Due to the high volume of comments, we have put a FAQ in the comments.
      The FAQ pinned at the top! You should find your answer in this FAQ or comments underneath.
      Cheers MBK

  • @vedso9163
    @vedso9163 3 роки тому +1

    Every time I turn my my receiver on it stays on for 2 seconds and then shuts off do you know how to fix that

    • @Repair2Renew
      @Repair2Renew  3 роки тому

      You will have to take your Yamaha re ciever to an Authorised Yamaha repair centre. Your Yamaha is picking up a fault at startup, and shutting down to protect itself.

  • @ufcguruofficial
    @ufcguruofficial 2 роки тому +1

    Doesn't work on HTR6040

  • @brentbauer8258
    @brentbauer8258 3 місяці тому

    I have a htr5550 and there is no straight button

  • @HappyBloke81
    @HappyBloke81 3 роки тому +1

    Mines not going into setup at all Rx v663

    • @Repair2Renew
      @Repair2Renew  3 роки тому +1

      Take it to an authorised Yamaha repairer

    • @HappyBloke81
      @HappyBloke81 3 роки тому

      @@Repair2Renew all good I download pdf mine is the test button and power button for reset.

  • @jslade60
    @jslade60 Рік тому

    All mine does when you hit the power button you hear one click and that's it nothing powers up no display no nothing

  • @ceecitizen3939
    @ceecitizen3939 2 роки тому +1

    Mine still won’t reset. It has a red light on, that’s about it. Help?

    • @Repair2Renew
      @Repair2Renew  2 роки тому

      I would love to help, but the Yamaha is hard to diagnose, when not in front of me.
      You will have to take your yamaha to an Authorised repairer
      Please check the FAQ's in the description of this video.

  • @dalemendes9969
    @dalemendes9969 Рік тому +1

    Did not work for me . Tried over and over no luck.

  • @mahmoudpepsi
    @mahmoudpepsi 2 роки тому +1

    The firmware version update

  • @bestgramsgmail5941
    @bestgramsgmail5941 2 роки тому +2

    I got the settings reset, but it still won’t play sound. Their lips are moving, but that’s it. Hahaha

  • @iksralquyuud
    @iksralquyuud 2 роки тому +1

    After leaving here, did a bit more looking round the net and found this video ua-cam.com/video/hwnU7zkvn0E/v-deo.html basically showing how the chip responsible for audio processing sometimes tends to go on strike when cold and how he got the audio going again by blowing hot air on it! I didn't want to mess around with opening up my receiver, but funny enough, after trying the RESET here and getting no results, as well as the other step outlined in the FAQs below, I inadvertently must have left the unit with the power on and went to the kitchen for dinner. Midway through the meal I started hearing faint music coming from my study and LO 'n BEHOLD! the damn thing is working again!!! all by itself (I must have gone through all the INPUT selections and left it on TUNER). OKAY, that's a relief, but will it cut out again when the chip gets cold, I wonder? We'll see.
    BTW, do you know if the generic remotes for these receivers sold on AliExpress are any good? I bought the HTR-3066 without a remote and have not needed one for my purposes so far, but am curious whether having a remote might come in handy if this receiver keeps working. Thanks again and sorry for the long comment : )

  • @afsbt
    @afsbt 2 роки тому

    gott a yamaha rx-v667 no power .. i gett this code: ps prt: 147 H
    Do no how to fix it 😅😅

    • @Repair2Renew
      @Repair2Renew  2 роки тому

      You will have to take to a qualified repairer

  • @scratchyexma8112
    @scratchyexma8112 3 роки тому +1

    I tried this but can't get it to reset. What should I do?

    • @Repair2Renew
      @Repair2Renew  3 роки тому

      Take it to a qualified electronics technician or Yamaha Service centre.

    • @scratchyexma8112
      @scratchyexma8112 3 роки тому

      @@Repair2Renew Weirdly enough I got it to work by resetting the remote just after I sent this. It now works off the remote but not off the receiver itself. I only use this as an amp for music so need to investigate further as it has never given me trouble before.

  • @RaySeunaraine
    @RaySeunaraine Рік тому

    👍

  • @maurybitgood5334
    @maurybitgood5334 2 роки тому +1

    WTF??? now my reciever isn't working at all !!!!

    • @jarnomansikka4315
      @jarnomansikka4315 Місяць тому

      Same here. 😅 do you solved it?

    • @maurybitgood5334
      @maurybitgood5334 Місяць тому

      @jarnomansikka4315 not completely, I got the main unit going via manual reset but the remote is inoperable, difficult to find replacement.

    • @jarnomansikka4315
      @jarnomansikka4315 Місяць тому

      Ok. When I did that from the video. All my speakers gone and I cant anymore to connect my TV and I cant hear (there are Not signal) from any streaming services sounds. 😅

  • @ggusta1
    @ggusta1 2 роки тому

    Rx 461. Didn't work at all. Boo. I think it could be a goner. It's only about 25 years old!