My 10 Ghz EME Receive Experiment

Поділитися
Вставка
  • Опубліковано 27 лис 2024

КОМЕНТАРІ • 16

  • @hamradioop5777
    @hamradioop5777 Рік тому +1

    Wonderful Skip, one of the most enjoyable ham radio videos I've ever seen!

  • @mikefinn2101
    @mikefinn2101 Рік тому

    so cool WOW what a real great video and so fun to watch getting more interested in doing what you do Skip. first got to get 23cm going but nice to copy the cw so clearly I hope I have the same great success and adventure. So nice to share Skip enjoy your videos and learning so much for me 100% learning Many million billion thanks wb7qxu Mike

  • @radeohedca
    @radeohedca 2 роки тому

    Very cool Skip ! I'm really impressed with your mechanical work, especially the actuator control to peak the focal point !
    Are you any closer to being able to transmit and start making QSOs ? Hugh, VA3TO.

  • @scottcharles4618
    @scottcharles4618 2 роки тому

    That was real cool Skip. I had no doubt that you would receive something off.
    Do you have an amplifier for 3cm??

  • @VK3CSJ
    @VK3CSJ Рік тому

    Thanks Skip...good stuff - VK3CSJ

  • @davidkerl1431
    @davidkerl1431 Рік тому

    Skip, I really enjoyed the video. Very informative. Dave N9HF el99

  • @beyondcli
    @beyondcli Рік тому

    Nice setup and that dish should be plenty of gain for 3cm. How fine is the dish mesh? Needs to be less than 10% of the wavelength so smaller than 3mm for 3cm band?

    • @VE6BGT
      @VE6BGT  Рік тому

      Hello Dwayne, the big dish has a mesh of around 4mm opening holes if I can recall correctly.. This was more of an experiment as you will see in other videos where I tried a 6 foot solid dish that was better than the large 21 foot mesh dish.. It was just a test to see what was what.. I am working on a 6 foot offset dish now.. I have a few videos on it and its being worked on for the final assembly eventually.. More videos on it so stay tuned.. Skip

  • @ve7pke
    @ve7pke 2 роки тому

    Skip, that proves you might be able to make some Q’s. What is your calculated beam width. ?

  • @ManuelPinner
    @ManuelPinner 2 роки тому

    Icom have just came out with the ic905 Transceiver that have 10 Ghz,

  • @raydall3734
    @raydall3734 2 роки тому

    AI5FF Looking to start doing this myself.

  • @BestSpatula
    @BestSpatula Місяць тому

    Is "lunar noise" just sun noise bouncing off the moon?

    • @VE6BGT
      @VE6BGT  Місяць тому

      Hello and thanks for asking.. Yes its a combination if I remember correctly, the solar noise bouncing off it when it can, or the "dark noise" all natural objects emit at these higher frequencies.. Skip

  • @stevebrandon5921
    @stevebrandon5921 2 роки тому

    Skip, what is the opening size of the mesh in your dish?

    • @VE6BGT
      @VE6BGT  2 роки тому

      Hello Steve, the big mesh dish has a diameter of 21.5 feet.. f/d is .444....
      Works great up to 6cm and does work for 3cm but in the other video, part-2, the little 6 foot solid is as good or better.. Nothing not know but interesting to see in real time effect.. Skip

  • @ВладимирЛукьянов-я5г
    @ВладимирЛукьянов-я5г 5 місяців тому

    +