FINALLY PUTTING THE ST225 ENGINE INTO THE ST150 *CONVERSION*

Поділитися
Вставка
  • Опубліковано 1 лис 2024

КОМЕНТАРІ • 52

  • @simmyrox2594
    @simmyrox2594 9 місяців тому +4

    Can’t wait to see the finished product will be one hell of a fiesta that’s fore sure

  • @Wardy75
    @Wardy75 9 місяців тому +3

    Great to see another video, keep it up. Looking forward to seeing the next video 👍

    • @Richieesgarage
      @Richieesgarage  9 місяців тому +1

      Thanks man hope try to up twice a month minimum even if they’re 10minutes videos!

  • @mex8961
    @mex8961 9 місяців тому +2

    Really hope you carry on with this build and see it through to the end 👍

    • @Richieesgarage
      @Richieesgarage  9 місяців тому

      I hope so too only time will tell defo but more motivated after seeing the positive response to the last video ❤

  • @CuriousGamer022
    @CuriousGamer022 9 місяців тому +1

    The biggest job is done now mate,just the little custom jobs and refitting the parts,uve come a long way 👍

  • @Richieesgarage
    @Richieesgarage  9 місяців тому

    APOLOGISES everyone for the random “End screen subscribe clip that overlapped” I was rushing the editing process as was heading to work for a night shift and didn’t wanna not upload today! So editing a little off will do better next time! 😂

  • @dan.roberts
    @dan.roberts 9 місяців тому +1

    Long time sub here, I feel better positively this video for sure like you got your motivation back, last video you did seem abit more neg 😂 either way keep this quick update content coming, would love to see this build rippin soon! 🎉

    • @Richieesgarage
      @Richieesgarage  9 місяців тому

      On it man! Thanks for sticking around!

  • @ChrisCreighton-wv4nw
    @ChrisCreighton-wv4nw 7 місяців тому

    Right on! Motors in! Now the real fun can begin. Hope to see this car on the road soon mate

  • @glynnmason8205
    @glynnmason8205 9 місяців тому +1

    Keep at it its getting there

  • @ForexDan_
    @ForexDan_ 5 місяців тому

    What welding and fabrication is required for this please mate? New subscriber.

  • @paulredburne1978
    @paulredburne1978 4 місяці тому

    So has it sold or are you cracking on with it as very interested in this build

  • @BOOMBABY2020
    @BOOMBABY2020 9 місяців тому +1

    thats great good luck bud

    • @Richieesgarage
      @Richieesgarage  9 місяців тому

      Cheers mate I always see you in the comments ! Appreciate the support

  • @miaokyi5330
    @miaokyi5330 9 місяців тому

    Damn bro, seeing the 5cyl engine in the fez, makes me reconsider the mazda swap in mine, wanted to go with a 2.3 5 cyl from a 750 but figured the 2.3 DISI is better due to the straight swap nature. Really hope to see this project finished.

  • @KS-wc4dr
    @KS-wc4dr 9 місяців тому +1

    Great Content Bro Keep Up The Good Work Cant Want To See It Done 👍✅

    • @Richieesgarage
      @Richieesgarage  9 місяців тому

      Thank appreciated I can’t wait either !

  • @danmark2040
    @danmark2040 9 місяців тому

    Going to be a beast, can’t wait 😝

    • @Richieesgarage
      @Richieesgarage  9 місяців тому

      Me too who knows where we will go and who/channels we will meet

  • @Thewayitis111
    @Thewayitis111 5 місяців тому

    Any updates on this build!!

  • @scutchins7298
    @scutchins7298 9 місяців тому

    PRD make a tubular front end for the mk6 which gives tons of room

    • @Richieesgarage
      @Richieesgarage  9 місяців тому

      Yh he wanted my car their though and if im honest i dont wanna pay to take it all the way so i think ill make one myself!

  • @kaiwilson0364
    @kaiwilson0364 9 місяців тому

    How are you going to go about the ecu? Will you be using a custom one?

    • @Richieesgarage
      @Richieesgarage  9 місяців тому

      Standard ECU as I’m using all the wiring from the st225 including all interior loom

  • @GY-te7bb
    @GY-te7bb 4 місяці тому +2

    What happened to the channel mate?

  • @crazykingfamily5883
    @crazykingfamily5883 2 місяці тому

    Hi mate just a quick one how hard is it to install st225 timing belt or could you help me.
    Contacted you before got engine reconed the 9 months later timing belt cam off garage wont honoir warranty. But need to install belt to do compression test.

    • @Richieesgarage
      @Richieesgarage  2 місяці тому

      @@crazykingfamily5883 pretty easy mate tbh just take your time and watch a UA-cam video

  • @Focusstmk2.5
    @Focusstmk2.5 9 місяців тому

    Great vid, man, shame about those lights. lol i bet you can't wait for this project to be finished

    • @Richieesgarage
      @Richieesgarage  9 місяців тому

      Yeah lights aren’t bad when I have two batteries running which I have 9 spare car battery’s all in good health so should be fine but Yh defo can’t wait man idk what to do next I think I need to put all the ancillary’s on etc

    • @Focusstmk2.5
      @Focusstmk2.5 9 місяців тому

      @Richieesgarage 9 bloody hell that's alot lol 😆 out of the whole project. What's been the most stressful part

    • @Richieesgarage
      @Richieesgarage  9 місяців тому +1

      @@Focusstmk2.5 other than motivation ?,tbh nothing has been stressful yet I think the wiring is gonna be the most stressful part, and building up the front end to make way for the rad pack and intercooler!

    • @Focusstmk2.5
      @Focusstmk2.5 9 місяців тому +1

      @Richieesgarage I hate wiring, man. It's so confusing unless you know what you're doing. You'll be alright. There are never no videos on YT about stuff that you need to know lol.

    • @Richieesgarage
      @Richieesgarage  9 місяців тому

      @@Focusstmk2.5 yeah tbh all it is, I have to remove all interior wiring loom then put the Focus look in and just change all the plugs for things like doors and speakers etc

  • @fanatbmx
    @fanatbmx 9 місяців тому

    Great project ❤Watch with enjoy

  • @sareph69
    @sareph69 9 місяців тому

    I unsubbed because of the bad response you once gave me when I was excited for your AWD, but glad to see you back and better.

    • @Richieesgarage
      @Richieesgarage  9 місяців тому

      I don’t recall but apologies glad you’re back

    • @sareph69
      @sareph69 9 місяців тому

      @@Richieesgarage No worries my guy, we all have our ups and downs.

  • @johngraham1763
    @johngraham1763 9 місяців тому

    You still selling

    • @Richieesgarage
      @Richieesgarage  9 місяців тому

      I don’t think so, got too much support behind which gave me a nice kick up the backside

    • @owenbrown2322
      @owenbrown2322 5 місяців тому

      Whens the next update

  • @shaunwelch9176
    @shaunwelch9176 9 місяців тому +1

    Shame ur to far away would of help ya with it

    • @Richieesgarage
      @Richieesgarage  9 місяців тому

      Appreciated bro we’re all building this together via the web 😂

    • @shaunwelch9176
      @shaunwelch9176 9 місяців тому +1

      M25 is there killer gettin to u lol.... and keep up the work boyo

    • @Richieesgarage
      @Richieesgarage  9 місяців тому

      @@shaunwelch9176 oh the biggest car park that is 😂

    • @shaunwelch9176
      @shaunwelch9176 9 місяців тому

      Yep me going from top to nearly half way round could take days, months or even years 😅

    • @Richieesgarage
      @Richieesgarage  9 місяців тому

      @@shaunwelch9176 yeah just watch from the web pal 😂