Looks great...just subscribed aswell brotha......how did you lower it without the bolt in the way?.....I have 24s aswell and i have the bolt shaved....any advise would be great
Looks good. But they settle too much over time, and will get even lower than that. Only reason I passed on them. The eibach was a better fit for me. Lots of people report mad scrapping after time on the belly pan. You clean now, I am still thinking about going to 24s.
Servin Lean704 Sure they are 24 by 10s in the rear with a 8 inch lip and 24 by 8. 1/2 in the front with a 3.5 inch lip by the way these wheels are for sale because Forgiato just shipped out my new wheels yesterday
Servin Lean704 sorry I’m not 100 percent sure because when you deal with Forgiato my guy Alex at the company gets my information on my vehicle and builds them too the factory specs.
@@vnun88 Totally understand when you place your order give the the year make and model of your vehicle It’s different when you have a wheel built for your car because you tell them how you want them too fit on your vehicle and they will tell you what will work for your application I sold that car with those rim on it so I can’t answer that ? Truthfully Butt they were built too the factory specs if that helps 🤙🏽
392_Skandoe I don’t have any issues with my tires rubbing because these wheels were custom built for this car so the offset is on point and I’m running a 275/25 -24 in the rear and I’ll put the wife an kids in it with no problem
96chevyboy I get a very smooth ride and it handle like a dream they also ride better than my factory’s only thing was my mopar lowering springs were a little tighter on the front they just weren’t low enough 🤙👌🏾
96chevyboy the fronts were off just a little bit when I had it up on the rack it’s the back that was given the most issues they were off by 10 degrees and we fix that so that’s about it .Tell you what I appreciate your comments and when my airlift system comes in I’ll hit you up and you can have these.FREE OF Charge 👍🏾🤙
96chevyboy yes sir I just that person it’s going too be around a month or so because I work so much when it comes in I have too make time too install it so sit tight for me and there yours sir👌🏾
First of all them fuel injection ass motor are not shit, on Blackstone i smoke a i wish 392 in a 2008 mazda 6 fake ass hemi and the mazda 6 isport is a v4 fuck them fake ass hemi's
Yo bro what’s your setup for those forgiatos ? I am looking to go bagged and I have forgiatos but my cannot gets lowered the rears are huge what is the wheel specs and tire size for those ?
I love the low profile tires! That’s how I want my ss to look!
You got it looking good over there
Thanks sir I appreciate it
Well done. The clean look is well executed. Very nice.
Gustavo why thank you sir
You charger sitting just right! No wheel gap! Its perfect!
Thanks 🙏
See this around town sometimes love it!
Now this is a nice setup nice work as always!
She's a Beauty I have to go and view all of your videos!keep em coming!🔥
Steven Gill hope your not disappointed 🙏
That's what I'm talking about BJ....🙏🙏🙏🙏🙏....looks great bro... and yes Track mode is like it woke up an already angry lion...lol
Yessir looks good with that drop top
King Dj-Slim thanks 🙏 a million sir
Normally im against wheels bigger than 22s but urs look nice. Good stance as well. The fact that its 24s saves you from going negative on camber.
I had it put on the machine and it was only off by a hair so it told them don’t worry about it and left it alone ✌️ Glad you approve thanks 🙏
Dammm that just won award from me 🏆🏆🏆🏆🏆
Looks great...just subscribed aswell brotha......how did you lower it without the bolt in the way?.....I have 24s aswell and i have the bolt shaved....any advise would be great
When u lower ur charger did u had that bolt hitting the tire or rubbing???
Very nice man... Specs on the Wheels and tires? Thanks
looks good the way it sit great product👍
Mean Gene Customs n here !
@@beemackin2316 you kno it ✊
Thank's for your sub! A excellent veiw well done! Your Camara work is impeccable!👍✌
1Sean Bond thanks sir Apple products works flawless
H&R Got u setting right. Look Great 4 Real.
Thanks and these are the best riding springs out there
Car 🔥🔥🔥
fire as hell
Subscribed 👍🏾
looks good!
Looks good!!!!
Cars with JDUB thanks 🙏
Do they fit without cutn
ghost dos dies yes the only part about running this size wheels is that you have too grind the front bolt down some
Thats a dope setup
Thanks 🙏
I wonder what the curb weight of those wheels and tires are compared to stock?
Thathellcatguy sorry I don’t know the weight of them but when I get a chance I’ll do that
What size tires you running i just put 24 on my scak
Gr8 look homie!
Shawn Thomas thanks 🙏
Perfect!!
Looking good bro
Josh Jayoh Cherry thank your sir I appreciate it
Looks good. But they settle too much over time, and will get even lower than that. Only reason I passed on them. The eibach was a better fit for me. Lots of people report mad scrapping after time on the belly pan. You clean now, I am still thinking about going to 24s.
Mopar Family Man I hope they do lower more butt like I was saying about my wheel size it’s really not low enough for me 🤙 I want it lower
Mopar Family Man sir hit me up I got a brand new set of mopar springs for your 300
@@bj_from_the478 I would, but I don't plan on dropping it. I daily drive that one.
Nice charger
24/7 GrindMode313 I appreciate it
what tire size u running?
Sean Tufu 245/30 in the front 295/25 in the rear sorry about the delay been working 7 days a week for 2 months
🔥🔥🔥
Does the 24 rub
I didn’t have any issues with it rubbing
Where u get the rims from
Wheels extreme
Can you give me your wheel specs if you remember i’m planning on getting my setup done & i wanna show this to my wheel man
Servin Lean704 Sure they are 24 by 10s in the rear with a 8 inch lip and 24 by 8. 1/2 in the front with a 3.5 inch lip by the way these wheels are for sale because Forgiato just shipped out my new wheels yesterday
Bj478nor you have the offset or you don’t know that?
Servin Lean704 sorry I’m not 100 percent sure because when you deal with Forgiato my guy Alex at the company gets my information on my vehicle and builds them too the factory specs.
Bj478nor how much you want for those rims and tires?
Damn it looks damn good
Freddy Bell greatly appreciated 👍🏾
Did you shave your bolt to get 24s on?
Yes I did that’s the only way 24’s will fit on this car
Woooowwwww👀👀💪🏾❤️🔥
Lewisfam23 🙏
What size tires do you have on the 24s
295/25 rear 245/30 on the front
What’s the front and rear tire size looking for the same setup
Theblack_hemi 275/25 rear 245/30 front
Bj478nor thank you
Im trying to buy those what you askin?
Ricardo Campbell sorry sir I already sold them
Bj478nor 😭😭😭
I lowered mine and was scared to put some 22s on it until I saw this lol
Your good you have plenty of room sir 22” would make it sit lower too the ground because there a smaller wheel Butt you should be fine sir
I want some 24's for my charger, I'm just scared of those low profile tires lol
Reddboi Corey understand that life is not for everyone ☝️👌🏾🙏
What inch are the lips on the wheels if you don't mind me asking?
Mazi Shakur not a problem they have a 3 inch lip
@@bj_from_the478 on the front right? Not the back? And thanks for the info bro! I really appreciate it
😍🔥
👍🏿👍🏿👍🏿
What’s your offset on rims bro? I’m looking to grab some staggered wheels for my srt8
I have 24/10s in the rear and 24/8-1/2 on the front
@@bj_from_the478 naw I was talking bout the et number behind the rim. That tells u the offset. You told me the staggered setup.
@@bj_from_the478 I’m not trying to run a spacer so I need to make sure it’ll clear my brembos
@@vnun88 Totally understand when you place your order give the the year make and model of your vehicle It’s different when you have a wheel built for your car because you tell them how you want them too fit on your vehicle and they will tell you what will work for your application I sold that car with those rim on it so I can’t answer that ? Truthfully Butt they were built too the factory specs if that helps 🤙🏽
@@bj_from_the478 yea thanks
You don’t rub at all with 22”? I’m lowered on h&r also but on 20’ 305 tire in the rear and I rub like crazy.
392_Skandoe I don’t have any issues with my tires rubbing because these wheels were custom built for this car so the offset is on point and I’m running a 275/25 -24 in the rear and I’ll put the wife an kids in it with no problem
392_Skandoe sir These Are 24”s
Lol put some respect on it man love the car sitting perfect on the wheels
I got h&r springs on mine
Did yall have 2 get a front end alignment??
She sitting right
texboi709 thanks 🙏
MF clean man! 24s look much better than 26s on this model.
Do u get any type of bounce or is it just a smooth ride I've been told H/R have sum type of bounce nice car that is a 🔥🔥🔥🔥 setup
96chevyboy I get a very smooth ride and it handle like a dream they also ride better than my factory’s only thing was my mopar lowering springs were a little tighter on the front they just weren’t low enough 🤙👌🏾
@@bj_from_the478 did u have 2 worry about any camber issues
96chevyboy the fronts were off just a little bit when I had it up on the rack it’s the back that was given the most issues they were off by 10 degrees and we fix that so that’s about it .Tell you what I appreciate your comments and when my airlift system comes in I’ll hit you up and you can have these.FREE OF Charge 👍🏾🤙
@@bj_from_the478 u serious fam I appreciate that
96chevyboy yes sir I just that person it’s going too be around a month or so because I work so much when it comes in I have too make time too install it so sit tight for me and there yours sir👌🏾
NOT A BAD WAY TOO SPEND 10K THE WHEELS ARE NICE
Bryce Norrington yes sir you get what you pay for money well spent
Sheesh I paid $10k for a house fixer upper lol.
First of all them fuel injection ass motor are not shit, on Blackstone i smoke a i wish 392 in a 2008 mazda 6 fake ass hemi and the mazda 6 isport is a v4 fuck them fake ass hemi's
BMW & MBz. Pcs of shit cars. From my experience...
U made that beautiful car look so ugly with them awful looking big rims they don't look good
I guess that the reason why I was able too sale it for 15k profit money matters opinion don’t 😂
Yo bro what’s your setup for those forgiatos ? I am looking to go bagged and I have forgiatos but my cannot gets lowered the rears are huge what is the wheel specs and tire size for those ?
I ran a yo-yo 275-25 24 in the rear 10” wide and 8.5 in the front 245-30 24 with a - 2 offset in the front -5 in the rear hope that helps you
@@bj_from_the478 alright thanks for the info.