Я вам как заточник дисковых пил скажу, она быстро затупится при резке металла.А ресурс заточки у таких пил после резки металла, 2-3 раза от силы, так как зубы сильно бьются.При малейших отклонениях или нагрузках зубы вылетают с пилы. Такие пилы имеют право на жизнь, но имейте ввиду, что срок жизни у нее очень короткий!
Здравствуйте, пилю подобным диском от макита уже более 2х лет, каждый день, установлен на торцовке с протягом и все превосходно, тут главный критерий - правильные обороты, после нержавейки пришлось поправить зубы правда, а так чёрный металл грызёт наура и довольно продолжительное время.
@@Viktor-du4wpВОТ И ОТВЕТ - ОБОРОТЫ ДИСКА и ПЛАВНОСТЬ , ПРЯМОЛИНЕЙНОСТЬ и СКОРОСТЬ--- ПОДАЧИ ! И ЖЕЛАТЕЛЬНО "СОЖ", что НЕ РЕАЛЬНО ! 😂 И ПИЛИТЬ ТОЛЬКО ЛИСТОВОЙ МАТЕРИАЛ ! равномерная нагрузка на зуб пилы.
@@shaginur От макиты здесь только дисковая пила. Там по маркировке указано металлокерамика и карбид, возможно имелся ввиду карбид алюминия. Важно понимать что это американская сталь и скорее всего диск из линейки для профессионалов. Рядовому обывателю этот диск не нужен, раз, а второе не по карману.
Sad people Will Buy products with the Word devil on it to represent the product. What Will God Say to them people on judgement day. Jesús Christ told me Tell Them The End Is Near Tell Them The Kingdom of Heaven is At Hand. This happened to me September 6 2018
I do a lot of fabrication and these blades were a God send. I use them in my chopsaw and my 71/4" skillsaw, makes remote work safer than plasma, oxy/acetylene, carbon arc, or any other heat cutting method. Quick bevel for root pass, run two capping passes GTG. Less people needed for firewatch, and other safety processes.
Great for cutting heavy gauge metal studs if you’re a commercial framer. It is incredibly loud, though. Ear plugs,Face shield & long sleeve highly recommended though it throws a lot of shrapnel. Much faster and a lot less sparks than a chop box with an abrasive disc or a partner saw. Plus one blade can last for several days of continuous cutting They also make specialty metal cut off saws that have shielding built-in, so it throws less shrapnel.
Это цыркулярная пила чисто по металлу должна быть, по крайней мере по звуку и числу оборотов слышно, металл режется на малых оборотах. Если взять данный диск и поставить на Макита по деревообработке, он сгорит на 3- секунде, а так же возможно отлетят напайки, в лоб разумеется ).
Я алюминиевый лист 12мм обычной пилой по дереву пилил с частым зубом. Ничего не затупилось и не отлетело. Есть специальные пилы для металла, у них зубья чуть скругленные, я потом себе такую купил.
Definitely want sleeves, gloves, full face shield. The first time I cut with one, I just had safety glasses on. I could feel them hitting my face. Left me with a bunch of little cuts on my face. Great blades, though.
Как судоремонтник , я понимаю , что такие пилы нужны и практичны , но при нашем рапиздяйстве очень быстро кончаться диски и естествоиспытатели . Самый близкий пример клин болгарки с диском больше 180мм(разлёт осколков диска вдоль оси вращения) или зажим аналогичной пилы по дереву без упора , на глаз(дерево мягче металла , но будет рывок) . Кто работал с большой турбинкой тот меня поймёт . У нас бы начали отрезать тавр прямо на весу , без зажима в тисках . Или я не прав ?
Стесняюсь поинтересоваться: и много у вас ещё таких, которые "на весу отрезают"?!! Даже если б они плодились, как мыши, все запасники уже должны были кончиться...
@TacohMann I knew that, but understood. I was just making the OP aware that manufacturers dont make circular saws to cut one mayerial. it's the blade that you use, in that instance, a metal blade in a circular saw.
Я сначала думал это дерево он пилит, а потом как УВИДЕЛ срез и просто в осадок выпал. По оборотам такая же как и по дереву, видать диск делали под обычную циркулярку. Хочу себе такой!!!!
The shop at our school really needs this! We use coated steel white boards and often teachers need it cut down to size. My manager says it's okay to use our thin kerf finishing blade " since it works". My coworker thinks it's okay because the boss says so. He cut 12ft of steel whiteboards. Amazed a tooth wasn't thrown. I had to cut some 4 quarters oak for shelving. By the time I got 2 inches in, the blade was smoking and the wood burnt.sigh.
I literally only buy Diablo dates they last so long and cut through almost anything that I need to cut through on the job site even at home. I remember buying blaze some other brands and they only lasted the day. I got Diablo blades from a couple years ago I just keep them stockpiled.
Я вам как заточник дисковых пил скажу, она быстро затупится при резке металла.А ресурс заточки у таких пил после резки металла, 2-3 раза от силы, так как зубы сильно бьются.При малейших отклонениях или нагрузках зубы вылетают с пилы. Такие пилы имеют право на жизнь, но имейте ввиду, что срок жизни у нее очень короткий!
Здравствуйте, пилю подобным диском от макита уже более 2х лет, каждый день, установлен на торцовке с протягом и все превосходно, тут главный критерий - правильные обороты, после нержавейки пришлось поправить зубы правда, а так чёрный металл грызёт наура и довольно продолжительное время.
@@Viktor-du4wpВОТ И ОТВЕТ - ОБОРОТЫ ДИСКА и ПЛАВНОСТЬ , ПРЯМОЛИНЕЙНОСТЬ и СКОРОСТЬ--- ПОДАЧИ ! И ЖЕЛАТЕЛЬНО "СОЖ", что НЕ РЕАЛЬНО ! 😂 И ПИЛИТЬ ТОЛЬКО ЛИСТОВОЙ МАТЕРИАЛ ! равномерная нагрузка на зуб пилы.
Что такое подобный диск?? поконкретнее маркировку..
У макиты вся линйка была до 2.2 мм на большем размере они садятся моментально...
@@Viktor-du4wpя тоже пилю макитой 15 лет, 1 раз в год двери поставить в кварьире
@@shaginur От макиты здесь только дисковая пила. Там по маркировке указано металлокерамика и карбид, возможно имелся ввиду карбид алюминия. Важно понимать что это американская сталь и скорее всего диск из линейки для профессионалов. Рядовому обывателю этот диск не нужен, раз, а второе не по карману.
I've seen this clip like 5 different times now and it still blows my mind every time
It crazy to me too
Yes. Agree how can do it
I don't believe yet.
How many cuts per blade?
Same here. I've got that same saw, so I went ahead and bought the blade. Kinda scared to use it, tho 😂
Made that look easy and without any cutting fluid! Diablo with another brilliant product
Hell yea. They're expensive but definitely worth it.
And quiet too!
@RobShuttleworth surely it's not, those fuckers scream like all hell usually.
While Freud makes a good blade, i am afraid the camera is quicker than the eye
Sad people Will Buy products with the Word devil on it to represent the product. What Will God Say to them people on judgement day. Jesús Christ told me Tell Them The End Is Near Tell Them The Kingdom of Heaven is At Hand. This happened to me September 6 2018
I do a lot of fabrication and these blades were a God send. I use them in my chopsaw and my 71/4" skillsaw, makes remote work safer than plasma, oxy/acetylene, carbon arc, or any other heat cutting method. Quick bevel for root pass, run two capping passes GTG. Less people needed for firewatch, and other safety processes.
Just saw these, and wondering if it would be to hard on a Milwaukee cordless saw? Every time I see them do this it’s with a worm drive
don't thank your god
thank the engineers who designed it
Thanks God
Great for cutting heavy gauge metal studs if you’re a commercial framer. It is incredibly loud, though. Ear plugs,Face shield & long sleeve highly recommended though it throws a lot of shrapnel. Much faster and a lot less sparks than a chop box with an abrasive disc or a partner saw. Plus one blade can last for several days of continuous cutting They also make specialty metal cut off saws that have shielding built-in, so it throws less shrapnel.
No face shield for the company man, though.
Это цыркулярная пила чисто по металлу должна быть, по крайней мере по звуку и числу оборотов слышно, металл режется на малых оборотах. Если взять данный диск и поставить на Макита по деревообработке, он сгорит на 3- секунде, а так же возможно отлетят напайки, в лоб разумеется ).
Я алюминиевый лист 12мм обычной пилой по дереву пилил с частым зубом. Ничего не затупилось и не отлетело. Есть специальные пилы для металла, у них зубья чуть скругленные, я потом себе такую купил.
@@nchurly дело в том, чем и что пилить, а в количестве оборотов на роторе.
This set up is at a Diablo Tools booth during the World of Concrete show. They had a bunch of different blades to test out 👏🙌
This circular saw is aimed at carpentry has 5100 rpm, I've seen metal cuts with dewalt 20v saws as well
Ты обсалютно прав
That is the Diablo, good ideas to open a safe
That is so freaking insane! Hats off to Diablo/Freud!
Easier than a mill for steel cutting, no oil spray.
🙌
It's exactly like milling with a slitting saw.
Yes, these work! I've also cut thick steel with a smaller Steel Demon that fits on a battery powered circular saw. Great blade AND can be resharpened.
How powerful of a saw?
That was a nice pre-cut had it blended and everything
What you were seeing is the pencil mark to show here to cut lol
I can't believe you put your hand right behind that saw I did that 1 time and it kicked back and ripped my hand wide open.
I was about to comment on this. This is so dangerous especially with something like steel ... 😐. Stay safe Mr Dusty Lumber 👍
Yeah just let the off cut fall much safer
I noticed him do this on another cutting demo too.
👍
I know it’s dangerous but he can do what he wants to do
I used those for years, there’s usually a lot of metal shrapnel while using it with a regular circular saw
Definitely want sleeves, gloves, full face shield. The first time I cut with one, I just had safety glasses on. I could feel them hitting my face. Left me with a bunch of little cuts on my face. Great blades, though.
I have the Milwaukee saw for those blades, it captures most of the chips.
That's pretty impressive! And free-hand. Wow. Really steady hand. No heat? And no red paint...
Such a clean cut too!
The most amazing stuff I have seen in a while, great job for the people behind the idea and the invention of that disk is awesome 💯
Sweet vid but damn, I’d never reach behind the blade like that, too risky for me.
👍
Gigggggggling!!! Now, let's see a mortice machine... Think about how much easier it will be for the welders!!!
We've been doing this for decades... it's not new
🙌
I can tell that he's done this mor than once before
Sauberer Schnitt 👍
DUDE!!! WTH!!!! never seen that before.... HOLD ON!!!! I'll be right back. Going to go get that blade. OMG
It was awesome to test it out 👏🙌
Engraçado, né? Todo mundo tem uma maquita. Nunca vi uma boaquita... Bincadelinha !!!? Taubaté SP Brasil
Сколько раз смотрю это видео он все пилит и пилит а диск не тупиться , значит можно брать .
The result is flawless.
Nice Cut there !
Как судоремонтник , я понимаю , что такие пилы нужны и практичны , но при нашем рапиздяйстве очень быстро кончаться диски и естествоиспытатели . Самый близкий пример клин болгарки с диском больше 180мм(разлёт осколков диска вдоль оси вращения) или зажим аналогичной пилы по дереву без упора , на глаз(дерево мягче металла , но будет рывок) . Кто работал с большой турбинкой тот меня поймёт . У нас бы начали отрезать тавр прямо на весу , без зажима в тисках . Или я не прав ?
Стесняюсь поинтересоваться: и много у вас ещё таких, которые "на весу отрезают"?!! Даже если б они плодились, как мыши, все запасники уже должны были кончиться...
That's impressive cutting that thick of mild steel. I don't think I subject my woodworking tools to cutting steel, though
You know there are handsaws that are specifically made for cutting metal?
@@sebastiansiedler3829 yes but the saw in that video is a woodcutting saw with a metal cutting blade
Festool make a blade for the TS60 that is for aluminium 🤔
@@MrScotttomo82 you can cut aluminum with a regular wood blade pretty easily.
@TacohMann I knew that, but understood. I was just making the OP aware that manufacturers dont make circular saws to cut one mayerial. it's the blade that you use, in that instance, a metal blade in a circular saw.
Excellent blade!!
Diablo has the best stuff across the board!!
Я сначала думал это дерево он пилит, а потом как УВИДЕЛ срез и просто в осадок выпал. По оборотам такая же как и по дереву, видать диск делали под обычную циркулярку. Хочу себе такой!!!!
Если прабёш где и сколько майкни буду признателен.
Наш аналог диск " боекомплект " называется. Хорошая штука только стоит 7т.
Спасибо.🤝
Holy crap, I thought that was a piece of wood. That's pretty impressive
🤣
Wow!!!! I know thats slightly sped up but thats incredible!😳
I like your work
Can you do a normal speed video so we can see how fast it is?
Think that was normal speed!
That is normal speed. Those blades cut a lot faster than abrasive cutoff wheels.
This is normal speed
What's the price of that bad boy?
Wasn't normal speed at the end, thats for sure.
Fake!!!!! No way sorry
I have the same blade. Cuts steel like butter. Home depot sells them.
Diablo #D0748CFM 7 in. x 48 Tooth Steel Demon Cermet II Saw Blade for Metals and Stainless Steel www.diablotools.com/products/D0748CFM
This kind of vids that drew me into woodworking..
Marvelous!!!
It cuts steel like cutting styrofoam
у этого мастера слишком много пальцев и он явно хочет это исправить)))
Придерживать деталь в том месте, куда отбросит пилу - это прекрасный план))
Festool are furious right now 😂
I have always loved diablo blades. I dont need to cut steel right now but I will be investing in one of these if i do.
Wow, that is impressive.
The shop at our school really needs this! We use coated steel white boards and often teachers need it cut down to size. My manager says it's okay to use our thin kerf finishing blade " since it works". My coworker thinks it's okay because the boss says so. He cut 12ft of steel whiteboards. Amazed a tooth wasn't thrown. I had to cut some 4 quarters oak for shelving. By the time I got 2 inches in, the blade was smoking and the wood burnt.sigh.
Diablo + makita 👌👌
I didn't read, thought was wood; "a few seconds later".. ..reality made me 😱..
Very impressed..👏🤙🤝
That is a beast!!!
Aint no way, man that's cool
What's more amazing is how damn straight you made that cut with a skill saw! The blade is sharp, sure. But your cut skills make it sexy!😂
Qué locura! Que rapidez! Que precisión! Que corte!
Wow, that’s sharp
マキタ(MAKITA)GoodMachine
This rotating blade is also amazing
Cutting butter like a hot steel knife.
Die Geschwindigkeit mit der er durch den Träger geht es Wahnsinn😮 und dann noch mit einer Akku Handkreissäge .
It’s like a dewalt blade going thru pine 😮😁
I use these blades all the time they are very nice and precise
That's awesome! I enjoyed this test out 👏🙌
I remember my first new blade too. They always hit harder outbof the box. 😂
I literally only buy Diablo dates they last so long and cut through almost anything that I need to cut through on the job site even at home. I remember buying blaze some other brands and they only lasted the day. I got Diablo blades from a couple years ago I just keep them stockpiled.
😮 no way that is wild
Excelente!!!
Solo que tenemos que llevar con calma la máquina 👍👍
Diablo steel is from another world
It’s from hell. It’s hellsteel
😊
I am impressed
Wow this is news worthy to me ! Im getting one !
Is is absolutely insane 😮😮😮😮😮
Нереальные особонности такой пилы!
Впервые вижу срез дерева настолько блестящий!
Well it looks beastly. If it works that well, it is very impressive.
It does wirk that well, use one almost daily.
I just bought a bunch of their rebar demon SDS drill bits. I hope they work that good lol
Thats impressive
El diablo!!! Esa herramienta es muy buena
Clean as shit too
One kickback - atleast two fingers gone
That's pretty I have zero need for this ATM but when I do good to know
Good to see some others brand's then festool hehe 🎉
they leave a nice edge
If only I could access the beam so easily 😂
This is very cool.
The Beast! 😈
🙌
Amazing 😮
Nice !
I didn’t know this was a thing without plasma torchs
Impressive 👍🏼
Quem dera q nós antigamente tivéssemos um disco 💽 de corte desse! Simplesmente espetacular! Parabéns 🇧🇷👏👏👍👍👍🤝🤝🤝
Clean
Рез шикарный!👍
That’s insane
Finally! Now we know how the stones were cut to make the pyramids!
Super Diablo☆☆☆☆☆
Beautiful
"I can't believe it is not steel!"
Don't know for what but I defenitively NEED THIS THING! 😏
Wow amazing
I just bought this same $3 blade at Harbor Freight, so worth the $.
Looks like you getting a HOT following bud
😂 haha there are 3
The bots are a pain
Whoa, That is great! SOLD
Sweet !
Muy bueno lo enpese a usar y la verdad si me a servido!
Muy buena , ya las he utilizado 👍💯
The reasons I can’t keep money in my pocket😂😂
I kept $34 billion dollar cheque in my shirt pocket. Now i just have a blank cheque 😢
I like to see him try it the other direction
Diablo is on it.
Clean cut...
Now there is a blade for circular saw that cuts steel