Finally have a running one of these. Ha. First esc bad. Horizon sent another. Second caught fire 😬 and burnt the motor etc. (both first runs). Battery may have been fine but it got so hot that i disposed of it. Installed new esc and motor they sent and now seem good to go! Customer service with HH has gotten much better! Should have gone ahead and installed larger pinion. It’s a fun back yard monster truck just like it is though.
Mate don't stress the complaints.. I think the love for your channel far outweigh the hate. It's like some just don't read a title or watch the footage before jumping to conclusions in comments. You just can't cater for stupid..! Keep up the good info... Cheers mate
My son was wanting a new Velineon Motor and ESC for his Slash and I got it not knowing my wife had already got it for him so I am going to add it to my new Digger when it comes in.
Great vid as usual. Lots of people are spoiled and actually complain when you spend your time doing all of these videos and making great content. I try to make some and it takes a lot of time with my minimal equipment supply. Keep doing what you do bud! Great stuff!
Huey Long I’ve run it on 3S a couple times, the motor gets hot really fast but the ESC doesn’t mind it a bit. I googled the ESC itself though and it’s advertised to be 3s capable so I wasn’t surprised there. Hopefully gearing helps or I’m gonna be putting a cheap brushless setup in it!
Huey Long I’d really like to find a way to make this 12 turn work with 3S though. in the runs I did with it on stock gearing the power looked so scale. It acted just like a real truck.
Hobbywing 1080 speed controller drop a 3s in it. Holmes hobby 550 12 turn sport. That'll be good for almost to 40% up and power should be plenty. Drop the painting down about to stock again that'll give you plenty of punch off the line and should bring you top speed up a bit too.
It is marketed as a crawler ESC. But it's 3s capable is 80 amps. Can be program forward brake reverse has a really nice internal b e c so you can put a high voltage high torque Servo on it no problem. Comes in at $42. Only $12 higher than a good b e c.
Hey man, love the channel, great video....it's got me really wanting an SMT10 now!! HAHA Scale-wise I think the speed seems just about right...I don't know if I'd change much. Love the Munition tires!!
I really want one of these. I missed out on version 1. Emailing me when available. I like the bigger tires but I may look for something a bit wider. Enjoy the channel, keep it up. (ignore the haters)
I have a 3660 hobby wing 5 mm shaft and a max 8 HW speedo. I’m ordering the axle inserts and a front seat bar. I just thought overdrive gears in front and back would increase over sped. If not I have castle 1/8 scale 2200 and mamba monster speedo and also the newer tekin 1/8 scale motor from my 4 10.3 that I used to race at my local track.
4 mph is pretty good for such minimal changes. Remember, if want a true idea of the difference you made you have to multiply by 10 to get the 1:1 equivalent. If that truck was 1:1 you just added 40 mph to the top end! That's a lot. -"Angry" Dave
Very cool! Although just on the I’m personally into then smaller tires purely from the visual point of view. Super cool though! SMT10 defiantly I the want list :)
I have a mamba x crawler edition..absolutely perfect for it. Gives it great scale speed and torque. Love it. Bought two smt10s one stock and they both have the same problems(servos and the bracket that holds the differentiel in)
Shoot, if i knew there was a complaint department for your channel, I would have bombarded it much sooner! Now, time to think of petty complaints so you make your channel how I want it to be!
I'd try going another tooth or two up or try running a 3s lipo with the gearing it has. Also perhaps it might help having a bit stiffer front end on it with thicker shock oil rolling over I'd imagine. Try locking the rear diff first, turning angle might become a bit wide with both locked I'd imagine on a grippy surface & servo might struggle a bit as well. Also how does the Kyosho monster van body fit this chassis ? Feel free too buy a spare unpainted body for that & see if you can fit it on if you cut out the rear of that shell.
Can you please do a side by side of this and the Cen HL150? Honestly have been wanting this digger since it was released again, but after everything i'm seeing the Cen HL150 is better out of the box still.
Awesome video🦾🦾‼️🔥 Do you know what the squeaking /chirping sound is ? I’m about to get mine the first week of March. Making sure I upgrade properly on the first try haha 😂
Paul Clancy that would be cool. But honestly the price for the Rtr would be the same as the kit with a body. Check the boys prices. 😉 just get the rtr and upgrade what you want...and you get tires.
@@CCxRC I knew it was a few weeks ago no problem, I'm working from home like everyone else and have been binging your videos again. I plan on getting the SMT10 but wanted to see how it ran in that config as a basher for kids. We tend to get the wheely king motors and ESC pretty hot bashing. The clod tires don't help haha.
People are hating because people are in a weird place because it is 2020. Keep on doing your thing. You are doing a rad job!!!!
LOL. You don't ever put the whole meal in one bowl. I'm with ya bro
I usually spread them out. Helps keep content coming to the channel
No hate from me my man, appreciate what u do
Finally have a running one of these. Ha. First esc bad. Horizon sent another. Second caught fire 😬 and burnt the motor etc. (both first runs). Battery may have been fine but it got so hot that i disposed of it.
Installed new esc and motor they sent and now seem good to go! Customer service with HH has gotten much better!
Should have gone ahead and installed larger pinion. It’s a fun back yard monster truck just like it is though.
Mate don't stress the complaints.. I think the love for your channel far outweigh the hate. It's like some just don't read a title or watch the footage before jumping to conclusions in comments. You just can't cater for stupid..! Keep up the good info...
Cheers mate
Mick D thanks mate! I usually don’t stress. Got quite a few the last week and one right as I was starting the video. Should’ve just let it be.
@@CCxRC peace, love and mung beans dude...👍
I haven't seen a video make me want one as much as this ...
Just ordered one !!!
My son was wanting a new Velineon Motor and ESC for his Slash and I got it not knowing my wife had already got it for him so I am going to add it to my new Digger when it comes in.
Haha, that's a great way to obtain upgrades... did she believe you?
@@paulcucit2786 Of course not, she never does when it comes to the hobby lol ,but she gives me the A for effort 😂
You do good forget them! Fans love your channel! Haters always want to down someone living the life they wish they could. Don’t change a thing.
Great vid as usual. Lots of people are spoiled and actually complain when you spend your time doing all of these videos and making great content. I try to make some and it takes a lot of time with my minimal equipment supply. Keep doing what you do bud! Great stuff!
For a brushed set up its really fun😀😎✌🏻
Thanks so much for posting, great to see the difference and what the new version is capable of.
Awesome vid Tony!
Killer! I want one. Keep up the great videos
I’m liking these upgrades.
Runs perfect on 16t with those blacked-out Duratrax treads! Can't believe how fantastic this rig looks now!
Pretty awesome I like speed upgrades👍👍👍
Its your channel you should be able to do what ever you want to post people should not get mad its you video!
Gonny be trying mine out on 3S with an 11 tooth pinion this weekend! Can’t wait to see how it goes!
How can you put an 11t in there? you have a diffrent spur gear?
Huey Long just gonna figure it out, might have to put the drimmel to work! ordered a 12 also in case that one doesn’t fit!
@@xWORLDxCHAMPIONx Awesome! You def need to let us all know how it turns out!
Huey Long I’ve run it on 3S a couple times, the motor gets hot really fast but the ESC doesn’t mind it a bit. I googled the ESC itself though and it’s advertised to be 3s capable so I wasn’t surprised there. Hopefully gearing helps or I’m gonna be putting a cheap brushless setup in it!
Huey Long I’d really like to find a way to make this 12 turn work with 3S though. in the runs I did with it on stock gearing the power looked so scale. It acted just like a real truck.
3s that bad boy
that was fun to watch thanks Tony PS i still have mine in the Box 2 years lol
Break open that box and get it rippin!
Very nice good job
It's not badd I like it ,, Speed wise👍
Hobbywing 1080 speed controller drop a 3s in it. Holmes hobby 550 12 turn sport. That'll be good for almost to 40% up and power should be plenty. Drop the painting down about to stock again that'll give you plenty of punch off the line and should bring you top speed up a bit too.
I thought that's for crawler?
It is marketed as a crawler ESC. But it's 3s capable is 80 amps. Can be program forward brake reverse has a really nice internal b e c so you can put a high voltage high torque Servo on it no problem. Comes in at $42. Only $12 higher than a good b e c.
@@davidpigg3942 no ik , I just got one. Hopefully HM be here today funny bc I just ordered exactly what you suggested for my capra or gen8
@@davidpigg3942 I'm not positive how hool bec up so also reason I ordered hw 1080 I didnt realize can use as regular esc
@@davidpigg3942 hopefully 12 holmes 12t not too much for capra I got crawlmaster sport and trailmaster 550 for gen8
Suspension is realistic.
Dude I have the exact same truck literally the same tires and wheels and all the other stuff
Then you have a good truck :)
Hey man, love the channel, great video....it's got me really wanting an SMT10 now!! HAHA Scale-wise I think the speed seems just about right...I don't know if I'd change much. Love the Munition tires!!
This is one of my favorite RC platforms. Super easy to work one and pretty durable.
Black rims and bigger tires is the way to go in my opinion 👍
Wow those duratrax tires look great... clod tire are to big in my opinion I'm ordering now that I've finally seen them mounted thanks bro
Seems like it’s the perfect size pinion for it.
I really want one of these. I missed out on version 1. Emailing me when available. I like the bigger tires but I may look for something a bit wider. Enjoy the channel, keep it up. (ignore the haters)
I have a 3660 hobby wing 5 mm shaft and a max 8 HW speedo. I’m ordering the axle inserts and a front seat bar. I just thought overdrive gears in front and back would increase over sped. If not I have castle 1/8 scale 2200 and mamba monster speedo and also the newer tekin 1/8 scale motor from my 4 10.3 that I used to race at my local track.
4 mph is pretty good for such minimal changes. Remember, if want a true idea of the difference you made you have to multiply by 10 to get the 1:1 equivalent. If that truck was 1:1 you just added 40 mph to the top end! That's a lot. -"Angry" Dave
Angry Dave's ADULT R/C that is very true. I actually don’t mind it at this speed.
Very cool! Although just on the I’m personally into then smaller tires purely from the visual point of view.
Super cool though! SMT10 defiantly I the want list :)
Just got my son one
It didn’t come with an extra 16t,
Also no drag brake jumper (good thing).
for bashing i would want it faster. you should do a break down video of your race monsters ;)
George Silliman it’s basically this with a castle 4600kv brushless motor in it and HD gears in the axles.
I like it, cool cool cool stuff NC❤ back yard RC.AND MORE.🖒
I wouldn't change anything, there not made for speed runs. It's perfect for backyard bashing. More speed equals more broken parts 😔..
I have a mamba x crawler edition..absolutely perfect for it. Gives it great scale speed and torque. Love it. Bought two smt10s one stock and they both have the same problems(servos and the bracket that holds the differentiel in)
Shoot, if i knew there was a complaint department for your channel, I would have bombarded it much sooner! Now, time to think of petty complaints so you make your channel how I want it to be!
Please route them through the Stevo D 313 channel for me. 😂
I'd try going another tooth or two up or try running a 3s lipo with the gearing it has.
Also perhaps it might help having a bit stiffer front end on it with thicker shock oil rolling over I'd imagine.
Try locking the rear diff first, turning angle might become a bit wide with both locked I'd imagine on a grippy surface & servo might struggle a bit as well.
Also how does the Kyosho monster van body fit this chassis ?
Feel free too buy a spare unpainted body for that & see if you can fit it on if you cut out the rear of that shell.
Not bad not bad. Should come like this from factory with working lights and be 3s ready.. ;) What about the temperatures?
Can you please do a side by side of this and the Cen HL150? Honestly have been wanting this digger since it was released again, but after everything i'm seeing the Cen HL150 is better out of the box still.
Huey Long the CEN is definitely faster, but this steers better. I’m having on-axle steering made for my CEN and it’s gonna really help it.
Awesome video🦾🦾‼️🔥 Do you know what the squeaking /chirping sound is ? I’m about to get mine the first week of March. Making sure I upgrade properly on the first try haha 😂
How wide are the Duratrax Munition Mt
What is the number on the tires
16T pinion and the stock electronics on 2S Lipo, I am going to guess 17mph
The Tank RC good guess!
@@CCxRC well it was easy you posted the answer on Instagram earlier
@@TheTankRC 😂I forgot about that lol
Do you have any issues with the front wheels hitting the trailing arms
Yes. That is one issue if you don’t turn down the steering end point. I use to my advantage make tight corners when racing
My question is can you change gears in the trans of diffs that would make the FDR more favorable to speed in addition spur and piñon?
Trans or the diffs; not trans of the diffs****
That was the axial 27t brushed motor?
12 turn dynamite is the new motor.
Cheers mate 👍
Mick is right. They now come with 12t motors and metal transmission gears.
@@CCxRC I just seen your first video on it. 12t motor is way faster than the 27t that came in it
What tire number is that i will get them plzl let me know
Duratrax munitions
2.2 or 2.8 ?
I would like to see it brushless
I wish sold grave digger as a kit
Paul Clancy that would be cool. But honestly the price for the Rtr would be the same as the kit with a body. Check the boys prices. 😉 just get the rtr and upgrade what you want...and you get tires.
First time I'm to early lol be back soon
Traxxas xl5 and 12T traxxas motor is faster. Works great for me with JConcepts tires and wheels
Keep breaking front servo any advice?
What was motor temp at the end? Fast enough for my kids and I already have the tires!
Don’t know. This was weeks ago.
@@CCxRC I knew it was a few weeks ago no problem, I'm working from home like everyone else and have been binging your videos again. I plan on getting the SMT10 but wanted to see how it ran in that config as a basher for kids. We tend to get the wheely king motors and ESC pretty hot bashing. The clod tires don't help haha.
Been looking at a redcat ground pounder have you driven one?
I owned one. really liked it.
यह कितने की आई है भाई इसका प्राइस
How do you keep the stock shocks from leaking? Any replacements you know of?
Would a 22T work for the smt10?
Not with the stock motor mount. I think 17t pinion is the max without drilling more holes.
How was the motor temps with the bigger tires and pinion?
I’ll have to check the motor temps
What is the runtime ?
That's a Good Speed for a MT and those DTrax Tires do fit Nicely 😎👍👍 Good Video Mr. T ✌😎👍 HFLPRCing RCFAM4LIFE
here is nigt now
Where do you get your ramps?
I've got them all used. Check Facebook Marketplace and thrift stores. I bought several landwave ramps and then put the ten eighty kicker ramps on them
☝🙏💪😀
Still slower than a nitro lmao
Ryan Neve haha. Yes. That is correct.