CAT Filter replacement for FASS filters...worth the money?

Поділитися
Вставка
  • Опубліковано 13 лип 2024
  • INSTAGRAM: @EddiesLife
    Temperature: amzn.to/2YJqT3d
    Watchdog: amzn.to/3hxJoy6
    Propane monitor: amzn.to/2XhDxGy
    LUCAS SPEED WAX: amzn.to/3gXsmIG
    LEVEL MATE PRO 2: amzn.to/2QsJkoB
  • Авто та транспорт

КОМЕНТАРІ • 114

  • @jjames5928
    @jjames5928 2 роки тому +19

    And to answer your question about Pre filling the filter . Most people who fill them fill them wrong , you NEVER fill a filter from the large hole ( outlet ) but everyone does , it must be filled from the small holes ( inlet ) which most people don't, its perfectly fine to pre fil a filter as long as you do it correctly. So the CAT service manual says not to pre fil it for this reason

    • @rydermaxwell7780
      @rydermaxwell7780 Місяць тому

      Yeah but there really is no point in filling them as the Fass is fully capable of doing that work for you I always just turn on the pump and crack the fuel filter until it starts to leak a little bit then I fully tighten it down to bleed the air out of the system

  • @joethelen9897
    @joethelen9897 2 роки тому +9

    The filters always say not to prefill because most people fill them incorrectly through the middle. If you are going to prefill the filter, it needs to be filled through the outside holes to prevent unfiltered fuel or oil from getting to the engine. In most cases, it doesn't really matter, but that is the reason for the filters saying that

  • @6xflowerranch890
    @6xflowerranch890 2 роки тому

    2022 Rammer Lonestar 2500 fully loaded finally came in 15 days ago. I ordered it late October. She a beauty.

  • @HammerHead524
    @HammerHead524 2 роки тому +3

    Cat engine oil filter . Part # 396-4596. Fits all year model cummins trucks.

  • @jdsmith556
    @jdsmith556 6 місяців тому +1

    I’m a cat technician and have been for almost 20 years. Caterpillar is extremely serous about their filters. It doesn’t matter if it’s engine oil, hydraulic oil, or fuel. Oh and by the way the engine oil is great too. You can compare the properties between CAT and Shell oil. Several of us up there run cat filters and oil on our Cummins powered trucks fuel/engine and have had no problems!

  • @taylorulrich2027
    @taylorulrich2027 2 роки тому +1

    Thanks for providing some entertainment on my birthday. Like the look of the CAT filters.

    • @maxracingteam23
      @maxracingteam23 2 роки тому

      Happy birthday!!

    • @EddieLife3500
      @EddieLife3500  2 роки тому +1

      happy birthday brotha

    • @joestuddyy6123
      @joestuddyy6123 2 роки тому

      @@EddieLife3500 wasup Eddie how much does straight piping a truck come out too

    • @EddieLife3500
      @EddieLife3500  2 роки тому

      No idea price keeps changing and going up and up

  • @saulthompson6613
    @saulthompson6613 Рік тому +2

    Liquids are typically incompressible. So if the filter is pre-filled (no air pocket left) then you may have trouble putting it on all the way correctly. Also some diesel (or oil) is bound to try to escape and that can dislodge the o-ring.

  • @_astralxinfluenced_2799
    @_astralxinfluenced_2799 3 місяці тому

    How long have you had that pump & is your filter change procedure the same every time you replace em? Curious cause I'd like to know how long the pump's gonna last by trying to prime it that way - by not loosening the disch. filter (aka is it necessary) & causing back psi/strain on it.

  • @jevonthomas2373
    @jevonthomas2373 2 роки тому

    Hey Eddie I switched filters on my fass I've tried carquest , Baldwin,can't remember the other brand and my fuel mileage went way down pulling my toy hauler so I decided to put fass back on and it went back up . I have not tried Cat so let me know if you notice anything different maybe I might try them out since I live in a Caterpillar town .

  • @snyderkurtis
    @snyderkurtis Рік тому +1

    Why do you switch positions when you use other filters that have a drain. Does it really matter?

  • @gerhartrodriguez
    @gerhartrodriguez 2 роки тому

    I use wix filter and i do put fuel in them just to get it starter faster.

  • @tnftrainingtruenorthstreng2250

    I was watching this before installing mine and when removing filters you said the drain goes on the front or the long shaft. Then you installed the opposite way?

  • @4rdzlla
    @4rdzlla Рік тому

    Any video of installing tbe front filter delete and rear cat dual setup?

  • @cynicaltexan9639
    @cynicaltexan9639 2 роки тому

    Does your water separator overlap on the fass too?

  • @brucesheehe6305
    @brucesheehe6305 6 місяців тому +1

    You can install larger size of FASS filters - close to CAT size. 3001XL and 3002XL.

  • @Alexander-fr1kk
    @Alexander-fr1kk 2 роки тому +4

    I saw a master mechanic talk about never pre-filling fuel filters or oil filters because of contaminants that can enter the filter when you pre-fill whereas the fuel that is pumped into the filter once it is installed is filtered before it goes to the engine where is the prefilled fuel or oil is not filtered once you fill up the filter

  • @reytech1786
    @reytech1786 Рік тому

    Your garage is bad ass bro! I’m a subscriber

  • @StreetRacingLifeStyle
    @StreetRacingLifeStyle Рік тому +1

    Im Sooooo Fkn confused the fass illustration shows the water seperator on the left side (Where the low hanging tube is) on mine anyways

  • @bdtaylor1979
    @bdtaylor1979 2 роки тому +2

    I always fill the new fuel filter on a diesel to reduce the chance of an air pocket. The last thing you want to do is get an air pocket in a diesel fuel system.

  • @BK-gc1jm
    @BK-gc1jm 10 місяців тому

    How often do you drain the water separator?

  • @casanovazombies356
    @casanovazombies356 Рік тому

    where did you get the filters?

  • @kyles234
    @kyles234 Рік тому

    You can fill the water sperator filter with fuel but not the secondary filter.

  • @jjames5928
    @jjames5928 2 роки тому +3

    CAT 396-4596 for the oil filter , its all i use.
    1R-0749 engine mounted fuel filter
    256-8753 under bed filter
    Have to have a kit to run those without a lift pump

  • @raulcolima6343
    @raulcolima6343 Рік тому

    What fads fuel system are you using?

  • @lwilde0422
    @lwilde0422 2 роки тому +3

    Eddie! You don't prefill fuel filters unless you are filling it through the small outer holes. The inner hole is your clean side. So if there is any particles they are going straight to your CP4! Better hope you didn't have any dirt on that fill nozzle on that transfer tank. Fass will cycle when you push your key and will bleed the system. Just cycle it a few times. Oil filters you prefill but the fuel injection system is WAY more sensitive to contaminates

    • @EddieLife3500
      @EddieLife3500  2 роки тому +1

      I keep the hole covered and thank goodness I don’t have a CP4

  • @50calprepper
    @50calprepper 2 роки тому

    Great choice! I run cat filters on my L5p
    Off topic, but how is the revolver/cover holding up? I know you had an issue with them before. Have they taken care of the issues with them? Would you still recommend? Thank you

    • @jeffjesky3547
      @jeffjesky3547 Рік тому

      I have a l5p tuned and such with Fass lift pump 220 gph cat filter would be ir 0750 however not sure about water separator any ideas sir ?
      Thanks have a good night

  • @zacharypulido1424
    @zacharypulido1424 5 днів тому

    Where can i Oder these filters at for my fass lift pump

  • @Bad_Financial_Decisions
    @Bad_Financial_Decisions 2 роки тому

    Your gauge cluster is blue because it’s a limited trim and its exclusive to that trim same with the limited long horn it comes with a different cluster

  • @ryanharkins9383
    @ryanharkins9383 Рік тому

    Wish my truck was that clean.

  • @daveb1870
    @daveb1870 Рік тому

    Semper Fi brother, did you ever find out why cat says not to use for fuel? I see there was a cat guy on here commenting but he didnt say.
    From one of fass videos their water fuel separator filter when water is introduced will eventually clog and if I heard right in the video from fass it will then not allow a bypass effectively possible saving an injection system from water intrusion. I wonder if thats why cat doesnt recommend using for fuel due to it not performing the same function as fass??

  • @user-ev1fb2tk2z
    @user-ev1fb2tk2z 7 місяців тому

    Why they tell you not too is fuel contaminatiin from a can funnel etc

  • @punkrockford
    @punkrockford 2 роки тому +4

    The reason you do not fill the filters is because it’s a common rail engine. Very sensitive to debris in the fuel. Fuel poured into the opening in the filter gets sucked directly out without going through the filter media. The FASS pump will prime by cycling the ignition key. No need to risk pre filling the filters.

  • @babybullsmith001
    @babybullsmith001 27 днів тому

    What is the part number 4 filter number #2

  • @dmaxdan6612
    @dmaxdan6612 2 роки тому

    How would your rear speakers be mounted if you have a rear windshield? No more speakers?

  • @gerhartrodriguez
    @gerhartrodriguez 2 роки тому

    I also write the date on the filters

  • @nathanh6950
    @nathanh6950 Рік тому

    Where did you buy the cat fuel filters? I’m looking into getting them but I’m not sure where the best place to buy them is

    • @Bigdaddyy69
      @Bigdaddyy69 8 місяців тому +1

      mdd performance has them for like 56 bucks for the kit.

  • @costarica-on4wr
    @costarica-on4wr Рік тому

    Can you post the cat fuel filter model numbers please sir

  • @moisesvargas7341
    @moisesvargas7341 2 роки тому

    Hey Eddie, thinking about getting a fass fuel system on my 19 Cummins. Not thinking about going over 550 horse power.. in that case wanted to get your opinion on either going with 100 or 165 GPH ?
    I heard you say you have the 165..

    • @EddieLife3500
      @EddieLife3500  2 роки тому +1

      Ya I would do 165

    • @xekikbeats
      @xekikbeats Рік тому

      I got the 165 on my 2nd gen just to be damn sure the vp44 won’t strand me again

  • @RamblinRoadies
    @RamblinRoadies 2 роки тому

    Sorry if this is a stupid question, but the FASS is some aftermarket filter modification?

    • @EddieLife3500
      @EddieLife3500  2 роки тому +1

      Correct, it is a lift pump that I added onto the truck

  • @punkrockford
    @punkrockford 2 роки тому +1

    All common rail engines say not to prefill. I have seen damage to high pressure pumps from dirty fuel

    • @grasscutter88
      @grasscutter88 10 місяців тому

      Yeah I'm so tired of people doing that too. The mechanic told me he soaked my filters in a bucket of diesel fuel before installing them to help them prime😒 kind of defeats the purpose of filtering. Mines an older vp44 truck

  • @krice24
    @krice24 2 роки тому +1

    Just changed my fass filter on my lml duramax, had 33k on them! Still have my factory filter as well and change that every 15k.

  • @cynicaltexan9639
    @cynicaltexan9639 2 роки тому

    Think I only had like 10-13k on my filter but I was sensing a disturbance in the fprce

  • @julioroman183
    @julioroman183 2 роки тому

    Lol. What have you done Eddy 1 oil change 😁😅😂🤣? Man youre my idol.

    • @EddieLife3500
      @EddieLife3500  2 роки тому +1

      Hahaha shyyyyyt I’ve done almost ten oil changes on the rammer so far

  • @caseykirschenmann2663
    @caseykirschenmann2663 Рік тому

    Fass makes a xL filter . That is the same size as that cat filter… fyi fass water separator is top notch

  • @JayJay-ym5jx
    @JayJay-ym5jx 2 роки тому

    Do you have a Home Depot box to cover the window in your garage?

  • @stevegonzalez7573
    @stevegonzalez7573 2 роки тому

    Question when I install this Fass system I won't need to use my engine bay fuel filter or my rear filter on my 2020 ram ??? Thanks in advance

    • @EddieLife3500
      @EddieLife3500  2 роки тому +1

      Correct you can cancel those out once you put the FASS system

    • @michaelhylle
      @michaelhylle Рік тому

      @@EddieLife3500 is there a rear filter delete option to keep from throwing codes or just remove it and there’s no issue?

  • @204RED
    @204RED Рік тому

    The reason you don't prefill is because the inside of the filter is where the clean fuel is sucked up and unless you can guarantee the cleanliness of the fuel you could be contaminating the fuel system

  • @ColtonBlumhagen
    @ColtonBlumhagen Рік тому +2

    Fass filters are a completely different design. They don't have a drain on the water separator because their design shows it's more effective at capturing water, and it showed that drain style filters drain more fuel and water stays in the filter.

    • @brucesheehe6305
      @brucesheehe6305 6 місяців тому

      Yes indeed. 3001 is a prefilter on the suction side of the lift pump and 3002 is both a water and fuel filter on the pressure side of the lift pump. Always carry FASS spares with you. If you get bad fuel and the filters becomes clogged, your truck will stop running. They are designed this way.

  • @medinablack5141
    @medinablack5141 2 роки тому

    What dual fuel filter setp are you using?

  • @ryanhernlund9188
    @ryanhernlund9188 2 роки тому

    Eddie did you see the recall :) cp4 recall finally

  • @n_rip8344
    @n_rip8344 2 роки тому

    Who told you switch locations of the water separator and particulate filter when using cat?

    • @EddieLife3500
      @EddieLife3500  2 роки тому

      Not sure what you mean, it’s always been that location

    • @n_rip8344
      @n_rip8344 2 роки тому

      @@EddieLife3500 not on the new fass 165s. The water separator according the the fass filter diagram has the water separator on the supply side aka the side with the ling shaft. And the particulate filter is on the suction side.

    • @shweller909gmailcom
      @shweller909gmailcom 2 роки тому +2

      I think it’s only swapped if you run the “new” fass filters. Old style filters is still with the separator to the back of the truck. I just switched to the New style Fass filters in my truck from the “old” style.

    • @EddieLife3500
      @EddieLife3500  2 роки тому

      I was always told the water separator goes towards the back of the truck

    • @_astralxinfluenced_2799
      @_astralxinfluenced_2799 3 місяці тому

      Yeah, just came across this video & I was gonna ask the same thing. I bought a FASS manufactured last yr & the filters have a picture on them of where they go: H2O sep. (3002) goes on the "straw"/discharge side of pump, whereas the particulate filter (3001) goes on the suction side...

  • @21psd
    @21psd 2 роки тому +2

    There really is no benefit to pre-filling the fuel filters since you're priming the fuel system correctly by cycling the ignition. As far as pre-filling oil filters, I do it and think its beneficial and perfectly safe as long as the oil is poured from a new/sealed container and not from some oil can that sits on top of a 50 gal drum in a shop. No telling what could have fallen into that oil can which will be introduce into the filter.

    • @rpsmith
      @rpsmith 2 роки тому

      Well Ram/Cummins had some turbos go bad and the failure was traced to pre-filling the oil filter. Turns out a small piece of the aluminum foil seal on the oil container was accidently transferred to the center port of the filter and when the engine was started, it went directly to the turbo!

    • @21psd
      @21psd 2 роки тому +1

      @@rpsmith that could definitely create problems, same as oil from a gun if there is debris on the nozzle. My brand oil doesn't have the foil seals, just the external crack ring on the cap which I make sure comes off the bottle before I pour.

  • @Bigdaddyy69
    @Bigdaddyy69 Місяць тому

    I had to use this method of priming. With the filter cracked it would not prime. Didn’t matter how many times I ran the pump. Once I tightened it up I cycled the pump 5 times and it was good to go. I’m see I’m not the only one who doesn’t crack it 😂

  • @bcobrag
    @bcobrag 2 роки тому

    Do you have a video Fass install?

  • @JoseOrtega-xn4mj
    @JoseOrtega-xn4mj 2 роки тому

    Can I install in a 2021 GMC 2500 6.6 Duramax?

  • @reitzy69
    @reitzy69 11 місяців тому

    Baldwin filters are better...wont get into as to why... do your research n find out...but yeah...i use a cat filter housing for pre fuel filters and a cat lift pump tho for my 12v cummins.....8 years n going strong n relatively quiet...esp compared to fass or airdog...i don't do the brand game...i go with what works ..if its good enough for my buds 4 million mile cat engine in his Pete...it works for me

  • @HammerHead524
    @HammerHead524 2 роки тому +1

    I can speak for the cat filters because i work for caterpillar. They put that on the filters because if you fill it then you can introduce contamination into the fuel that will not be filtered before going to injection pump. Cat is very big on contamination control. It can happen and has happened before. Not saying it will but cat is very strict on this. Same goes for the hydraulic and engine oil.

  • @jakewood332
    @jakewood332 2 роки тому

    Have you ever used the airdog pumps or do you prefer fass? Also do you have the ppei can am tunes?

  • @rpsmith
    @rpsmith 2 роки тому +1

    You stuck the fuel nozzle down in the middle hole of you fuel filter. That is the output port of the filter. Small particles that would be very difficult to see without magnifications could have been transferred from the nozzle (your garage is not a clean room) directly to your CP4 and on to your injectors. You gain nothing and risk serious fuel pump/engine damage. For what? It make you fell better?

    • @EddieLife3500
      @EddieLife3500  2 роки тому

      Like I said I have been doing it for 7+ years and have never had any issues.

    • @rickpatterson4495
      @rickpatterson4495 2 роки тому

      @@EddieLife3500 it only takes one time,, Just like going out without your mask on,

    • @MrSpccdavid
      @MrSpccdavid Рік тому

      This guy ^

  • @chad59
    @chad59 2 роки тому

    your motor will tell you if the air is blocked.

  • @hunter027
    @hunter027 2 роки тому

    I always fill fuel and oil filters. I have yet to hear an actual sound argument as to why you shouldn’t. “You are going to contaminate it” no, no I’m not

  • @ryanc8188
    @ryanc8188 2 роки тому

    The biggest reason the say not to do it is most times you're on a dirty ass job site with who knows how clean of fuel. All it takes is one little thing and an injection pump or injector is toast.

  • @lowelldelong7911
    @lowelldelong7911 Рік тому

    I run these filters also. There is nothing out there that can even come close to the micron rates of these filters, plus the quality of cat filters are far superior to any filter. 3 microns will take out these injectors, FASS is over rated.

  • @everydayoutdoorsadventures7644

    Anyone running cat filters on a 14 LML???

    • @ethanw4072
      @ethanw4072 11 місяців тому +1

      I’m running them on a 11 LML, Fass is quieter and pressure is more consistent but that’s just my opinion

    • @everydayoutdoorsadventures7644
      @everydayoutdoorsadventures7644 11 місяців тому

      @@ethanw4072 I’m fixing to replace my FASS filters with the “XL” FASS filters then after 2 oil changes I’ll replace them again. But if you think the FASS ones seem better I very well may stick with them.

  • @thesaiyanprincevegeta
    @thesaiyanprincevegeta Рік тому

    It don't matter how you prefill the filters lol been farming for 30 years and no issues whether it's the big hole or small hole just fill it up and stfu

  • @barrysimpson692
    @barrysimpson692 7 місяців тому

    People love to overworry about dumb stuff. Just change the dam filter. Throw the oldone in the trash and go on about your business

  • @markhushon1408
    @markhushon1408 7 місяців тому

    I guess you don’t like your injectors very much