Rikon rk50122
Вставка
- Опубліковано 27 сер 2024
- I recently purchased the Rikon rk50122 combination belt & disc sander. I thought that perhaps some of you may be in the market for a similar machine and be interested in having a look at this one. While I can't do a "review" on this machine, I can give you my pro vs con initial thoughts on it to perhaps help you make your own decision.
==================================================
If you like this content, please feel free to share it with others. Thanks for watching and have a great day!
=================================================
DISCLAIMER
READ THIS: All of the videos on this channel are intended for entertainment purposes only. Woodworking and the use of power tools can be extremely dangerous. You should only attempt to do what YOU feel comfortable and safe doing. What I do and how I do it works for me. However, I do NOT suggest or imply that you should do anything the way that I do. Always seek professional advice if you are unsure of the safe way to proceed and please, read your tools owner’s manuals completely and make sure you understand them completely before you use ANY power tool. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do.
Please stay safe, work smart and only attempt to do the things that YOU feel safe doing.
Thank You.
==================================================
If you have questions or would like to get in touch with me for any reason, then I encourage you to message me via my Facebook page (link below).
Facebook : / makethefirstcut
You can also find me on:
Google+ : plus.google.co...
Email: MakeTheFirstCut@gmail.com
___________________________________________________
Video Music & sfx: (All music and sfx are taken from the UA-cam audio library)
“Run” by Ethan Meixsell
Country Cue 1 by Audionautix is licensed under a Creative Commons Attribution license (creativecommon...)
Artist: audionautix.com/
“Hitting The Streets” by JR Tundra
Have a shop around for disc hook & loop adapters. I have two 14" disc sanders at work and used disc cement for YEARS. Buying an adhesive hook disc with the cloth backed sanding discs has changed a 45min-1hr process into a 5-10min one. Much cleaner and students and staff are much happier to get on with the class with a new disc.
Thanks for the video! I've been researching and i think this is the one! One tip for you though, the allen wrench to loosen the swivel to raise and lower the belt, I'd cut the long end of the allen in about half and then super glue it into the cap screw so it works like a thumb screw and won't get lost. I did that on the swivel of my 1/2" x 24 handheld jet sander and it works great!!!!
Good review, ty. If any adhesive doesn’t come off when replacing the disk sandpaper a smidge of goo-off. I use magnets to keep those things handy.
Nice!! That’ll come in handy!! See ya soon brother!!
Index finger is for pointing. Middle finger is for road rage.
Looks like a good machine Chris . I like the large belt and disc on it. I have just a Harbor Freight one similar but much smaller. A quick story it came with a round disc sandpaper on it. Mine is the sticky kind too..well I checked everything before I turned it on and it looked fine. I turned that thing on and was going to test a piece of wood and the sandpaper that was on the disc came flying off and dang near hit me in the head. I bought some better sticking paper and don’t have that problem anymore. Congrats on your new tool!
That box didn't stand a chance! I'd rather it be heavy personally. Looking forward to an actual review on this. Thanks for showing all the features, appreciate it.
Looks like a great machine!! I have a small HF 4x36 and I have the 12 “ dis sander 2separate units !!! I would like to get the bigger 6x48 belt unit some day! Thanks for sharing Chris Regards BobLee
A suggestion or two: When changing the disc sand paper, use a heat gun to warm up the adhesive. This makes it a whole lot easier. I keep a rare earth magnet at the tool to hold the allen wrench. You can make your own adapter with some pvc pipe. Check out Patrick's WorkShop - he has an excellent video about it. Enjoy your new tool! I see that you've already gotten it "dirty"... lol
It looks like you primarily utilize this sander for wood, but can you comment on the construction if used for steel? I have the lower cost Bucktool version, and although much of it is cast iron, the dust cover below the disc sander and the exhaust port are actually plastic and can't handle the hot debris and has started to melt. How do you think this unit would handle metal work? Thanks in advance!
so it's been a few years...how has the Rikon sander been ? Too big, too small, power? would love to hear a full review
Can you tell me please.. how loud is it? In decibels.
Everybody loves sanding!...lol. Anything that makes that job easier is welcome.
A blast with a heat gun on the PSA sand paper will re soften the glue and then the paper is easier to take off.
Stockroom Supply has a UA-cam channel. They demonstrate adding and use of the graphite sheet add-on to the platen to reduce the friction on the belt.
Nice catch, looks like an awesome machine..............
Better design than mine, for the disc sander get a stick on pad with Velcro on other side, saves anger & allows for more 🍺 time, hindsight tells me separate 20” disc & seperate belt sander are better options but hindsight is never around when first sight needs it , see ya 👍👍👍
What are your thoughts about this sander after owning it for almost 2 years?? Can you do a review on it now that you've put it to the test??
Great video! How’s this holding up after all these years?
Really well. It does all that I want it to.
Was searching for a review on this sander and came across your channel. Looks like you have a lot of other good videos for a weekend woodworker like me looking for some smaller projects to keep me busy, so I subscribed. Can you tell me how this sander is holding up for you? Was it worth the money?
Chris, did you ever post an actual review of this machine following your unpacking as you discussed you might do? I purchased a cheap Harbor Freight machine and it finally gave up the ghost - and I haven't even used it much. LOL Would be interested in hearing how this machine works/worked for you. Thanks.
I didn't do a review, but I can tell you that it's worked out really well for what I use it for. Good machine in my opinion.
I looked at this machine, but ultimately went with Laguna- DB12|6 Disc/Belt Sander. Excellent overview, appreciate you sharing.
Chris Cute I hear ya bud, I got a good deal on it, plus me lady helped lol. Rikon, does make great machines, at a fair price.
Chris- Now that you’ve got some time “under your belt” how do you like this sanding machine?
What’s your thoughts on using it for metal sanding ?
I bought one of those (crappy) sanders. The belt slips.... right out of the box. The disk sander is OK, but the belt sander is crap.
Where did you purchase the sander? They are 430.00 plus tax at Woodcraft. This is the Model I am looking for....but man that's gonna sting!
Cool review! Being a hobbyist I just need something small. Any recommendations as far as a benchtop sander?
Thank you very much Chris!
Hey try out WEN belt and disk sander I have it and it’s been great for half a year so far
That table on the belt sander is tiny. I know it’s more of a stop than a table but I have seen some sanders with a table there too. Have you had any problems with that?
No I haven't, but I don't need on bigger than that.
So.... my *BIGGEST* beef (and it's a huge one): How do you sand a long 2x4? Say I've got a 4' long board. I can sand 15" of one end, then turn the board and do the other 15". But there's NO way to sand the center portion. With my ancient 6x36" Craftsman, you have access to the whole belt, so you can lay the wood flat on it. With this piece of junk, the plastic dust collection piece (belt rear cover) blocks you from using the belt on the middle of the board. The fact that the longest piece you can sand is 30" is a real drawback -- I wish I'd known that before I purchased.
I'm ready to get the saw and cut that piece out of the way so I can use it as a 6x48" sander.....
Yes why didnt they make the dust port standard right. Annoying!
Sweeeet 👍👍👍
Awesome my brother I like it it's very nice to and the height is just for you bro lol later :)
I have the same machine, bought it new and think it's a cheap made piece of junk. The table for the disk is flimsy alloy and not cast or even steel. The belt won't track and the guards that have to be removed for a belt change are light gauge tin adding to more steps than needed in a belt change. Overall If I was rating a boat anchor or landfill material then it's fine but as a tool it fails.
OK VIDEO.
SALUTI
SALVIO