@@ValentínAlemVenturaFernández i've spent a couple of hours to try getting it back and it was a long time ago. I've already sold this scooter As far as I remember, the easiest way was to disassemble the unit further. As he is showing on 5:20 - remove the lower part that holds the spring, but I can be wrong as it was a year ago. But I definitely disassembled a few details more - that's for sure. And it took like 10 minutes to get it all back including the spring
The video is a solid guide but it skips a step when attempting to reassemble the spring that holds up the actual foot stamp. The breakthrough for me was to remove the back wheel and disassemble the actual stamp brake itself. There are 3 screws on the bottom part of the brake lever that allow you to take off the outer shell. It turns out that that shell is what was causing the tension and making it difficult to reassemble the spring. Remove the upper part of the foot brake assembly and the spring will reassemble easily. After you’ve replaced the clips to hold on the assembly, add the upper part of the foot brake back on.
Nice how you cut the video making it look easy to reinsert the pin through the spring and fender……took 4 hands and multiple tools to get it through everything.
Even after removing all three shafts I just can't align the small spring back. Can anyone explain how they did it that part was just skipped over in the video.
My ES4 e-scooter has an exposed wire located: behind front tire / bottom of long stem. This wire snapped due to the sharp edges & folding the scooter. What is this wire and How can I replace it? Is there a video, link or diagram 😩😳
hi dude tanks to do what you are doing !!!! i have some request to you !!! i think i broke my led below the grip can you do an another video to explain me how i replace them please !!!!!!!!!!
Hi guys, could you make a video describing how to stop the rear suspension from squeaking. Also how to fix the rear axel from ratteling when riding over every tiny bump.
Ninebot U.S. Hi, I've taken the rear suspension apart several times and have just yesterday come to the conclusion that it has to be the suspension that is rattling. The squeaking has slowly gone but the suspension rattles. As I can figure out it is the 2 outside plates that fix the suspension to the board that are ratteling. Metal against metal. I hope this makes sense to you.
Brandusa Simionescu Yes, it will still rattle as there are 2 fixing points on each plate. 1 is an axel type connection. The second part is not flush with the rest of the suspension. I guess this second part might be the one rattling. If there were a hard plastic insert for this I think most of the rattle might go away. I'm not sure though as there are a few other axles incorporated in the rear design.
I put the spring back with a claw thats hard... i cant put the peace how come throw the spring i just put it and shz dont get out on the other side she do her job... ived pass 1h to put back the two black peaces toogether wtf ??
having trouble with spring??? Remove the other circliped shaft and goes right in. Also loosen suspension spring it reassembles easier and just put 8mm Allen to retighten after installation
@@atrujillo7836 This works. Removed the wheel and you get an extra little bit of clearance than if the wheel is on. 1 min extra step but well worth it.
The main question is where to get the replacement parts. Does anyone have a good suggestion? I didn’t find anything in the UK but found that brake on Russian market. So, I’m going to buy it there for 18£ and then send to UK for about 15-20£. God bless the mother Russia.
you should have shown how to install the spring back....
Андрей Николаевич do you know hoy TO?
@@ValentínAlemVenturaFernández i've spent a couple of hours to try getting it back and it was a long time ago. I've already sold this scooter
As far as I remember, the easiest way was to disassemble the unit further.
As he is showing on 5:20 - remove the lower part that holds the spring, but I can be wrong as it was a year ago. But I definitely disassembled a few details more - that's for sure. And it took like 10 minutes to get it all back including the spring
Just did mine. Thanks. This was helpful.
The video is a solid guide but it skips a step when attempting to reassemble the spring that holds up the actual foot stamp.
The breakthrough for me was to remove the back wheel and disassemble the actual stamp brake itself. There are 3 screws on the bottom part of the brake lever that allow you to take off the outer shell. It turns out that that shell is what was causing the tension and making it difficult to reassemble the spring.
Remove the upper part of the foot brake assembly and the spring will reassemble easily. After you’ve replaced the clips to hold on the assembly, add the upper part of the foot brake back on.
Thank you... I am still so confused bc I can't find any video demonstrating what you are talking about.
Thankya Jesus! I was battling that thing forever...Good thing I saw this.
Great master!. That's the solution. Thanks.
Good video mate! My back cover broke. Thought it would be 123 fix, not the case but with your tutorial it was pretty simple! Thanks alot
Great tutorial 👍🏾 My wires at the front bottom of shaft ripped when I fell. How do I disconnect to replace those wires 😩
do you have a video detailing how to fix loos steering column or stem? how about what to use lubing suspension?
Nice how you cut the video making it look easy to reinsert the pin through the spring and fender……took 4 hands and multiple tools to get it through everything.
Hey guys, where does one orders legit part fot ES2 model?
Even after removing all three shafts I just can't align the small spring back. Can anyone explain how they did it that part was just skipped over in the video.
Hi, please any recommendation to install the spring back?
Ezequiel Gomez Data anh?
Can you make a video about removing the tires as this is an issue when they get worn, can’t find a guide anywhere
Tape up your rims and use tire pry bars and vaseline or soap you can also dremel the old wheel and install with first items mentioned.
is the rear deck the same as on the e25e?
Unless I blinked and missed it… When did you replace the brakes???
DOES ANYONE KNOW HOT TO PUT THE SPRING BACK
How did you do for 5:40?
The spring is really hard, I can’t put that back
My ES4 e-scooter has an exposed wire located: behind front tire / bottom of long stem. This wire snapped due to the sharp edges & folding the scooter. What is this wire and How can I replace it? Is there a video, link or diagram 😩😳
Thank you. I nearly escaped from dumping my board. Thank you.
hi dude tanks to do what you are doing !!!! i have some request to you !!!
i think i broke my led below the grip can you do an another video to explain me how i replace them please !!!!!!!!!!
Ese rin es plastico pintado o de aluminio
Hey there any info on how to change the tyres?
Is there an easy way to tighten the screw that holds the two plastic pieces together on the brake cover? The screw right above the rear tire?
How do I get to the wheel hub motor cable 😩
Does the error 15 video apply to the new Ninebot mAx? I keep getting the brake error message
Hi,
Have some of you tips on how to prevent splashing from the rear wheel when driving when it's raining
It happens even if it isn't raining. If the road is just a little wet it spits it straight up onto my pants. Looks like I shit myself.
Just download a 3D model of a mud guard attachment and sent it to a 3D printing company. Solves the problem completely. Even in rain.
We Need same part for E25 Segway
Way easy to get the spring installed if you remove all three clipped shafts...
Exactlyyyyy! Found that out the hard way
How the heck do you get the spring aligned?? I can’t get it through it won’t bend the spring is too stiff?? Pls help
where to order ?
Luv how you skipped the technic where you get the bolt through the hole and spring ;-)
Hi guys, could you make a video describing how to stop the rear suspension from squeaking. Also how to fix the rear axel from ratteling when riding over every tiny bump.
The rear spring suspension is squeaking? It's the the rattling you are talking about right?
Ninebot U.S. Hi, I've taken the rear suspension apart several times and have just yesterday come to the conclusion that it has to be the suspension that is rattling. The squeaking has slowly gone but the suspension rattles. As I can figure out it is the 2 outside plates that fix the suspension to the board that are ratteling. Metal against metal. I hope this makes sense to you.
Ninebot U.S. my rear axle rattles over every bump as well.
If you grease the 2 metal parts do they still rattle ?
Brandusa Simionescu Yes, it will still rattle as there are 2 fixing points on each plate. 1 is an axel type connection. The second part is not flush with the rest of the suspension. I guess this second part might be the one rattling. If there were a hard plastic insert for this I think most of the rattle might go away. I'm not sure though as there are a few other axles incorporated in the rear design.
I put the spring back with a claw thats hard... i cant put the peace how come throw the spring i just put it and shz dont get out on the other side she do her job... ived pass 1h to put back the two black peaces toogether wtf ??
Where can I buy the rear brake?
Is it easy to lock up the rear tire in a low traction environment such as sandy or wet road?
Maybe if you go faster than 25kph
wow so nice tutorial sir very helpul
having trouble with spring??? Remove the other circliped shaft and goes right in. Also loosen suspension spring it reassembles easier and just put 8mm Allen to retighten after installation
Hi, I've sent you an email to buy a rear brake replacement part. Can you tell me if you've received it please ?
How to change the tyre to more cushion ones?
How to align spring properly to install it back?? Not shown (Is it a secret?)
Did you figure it out?
Thank you for share this vídeo!
Is the rear tire easy to replace?
no, he does jump cuts because certain steps are crazy difficult and time consuming.
Great movie. Thanks!
Yeah good luck getting that spring to line up this video just skips that
Remove the wheel to get more room for clearance
@@atrujillo7836 This works. Removed the wheel and you get an extra little bit of clearance than if the wheel is on. 1 min extra step but well worth it.
The main question is where to get the replacement parts. Does anyone have a good suggestion?
I didn’t find anything in the UK but found that brake on Russian market. So, I’m going to buy it there for 18£ and then send to UK for about 15-20£.
God bless the mother Russia.
ebay has them from china... shipping is free but takes about 3-4 weeks
Segway-Ninebot Max
Of course the shaft won't slide back in to the body after fixing everything else.... this is ridiculous
Not just a job a nitemare!
Segway going out of business.
What time the app stop working?
Wtf I should bought a bicycle.
Stupid install never show the how the spring back
Nothing.
Szzzw
👎👎👎