You are the bomb Diggity, after spending several hours watching UA-cam videos you finally showy me how to seat the two throttle wire connectors into the correct area so I was able to properly seat the round Dashboard screen seats properly so it stays flush and seats properly. Again you are the man, A man among men with sword and pen!!! (seriously it’s been hours and hours that I’ve spent trying to find out how those connectors are supposed to go in so the dashboard seats properly. (I think of you made a short video and titled it “how to seat your dashboard in properly” It would help a whole bunch of people just like you/it helped me.Once again thank you thank you thank you I just subbed your Channel.👍
Very explanatory! Firstly I was hearing a little sound coming from the throttle when I moved it, so I thought it was the magnet that went out (as you show in your other video), but when I opened it I saw that the sensor was broken. Anyway, thanks to you I managed to change the brakes by myself easily! Thanks a lot! =D
One week after buying my segway es2 it fell and the throttle broke. Just finish replacing it like the video and it was not that difficult! Thanks a lot... hope it will work fine :-)
Great video , fitted mine after watching in less than 30 minutes. Any chance of a tutorial on misaligned handlebars ? As this seems to be a common issue too.
What could be the problem if the mine is just switch off during the travel and can't go more than 25 km/h in sport mode (ES4). First time it worked perfectly. Thank you,
Hi👋, have you any idea why i got rattling sound from throttle when i reach max speed on new ninebot f30e? When i go uphill rattling sound dissapears...
@@MrMisterpag The Internal battery needs to be replaced by a certified technician. This is for safety and warranty reasons. Also note that in order to get access to the internal battery you will need to break the warranty seal. Once that seal is broken the entire warranty on the machine is voided. We know that some of our riders are technical or mechanically inclined and want to be hands-on. We just want you to be aware of the consequences of attempting to access the main battery.
Ninebot US, thanks for your videos. My es2 was working fine then after not riding for a week or so when I turn it on I get 1long beep followed by 4 short beeps.then it turns off. Can you confirm this is code 14 and should I replace the throttle? Thank you sir and I did subscribe to your channel.
My throttle recently become loose.. I think I slammed on it too much during an emergency stop.. Is there any way to send the unit to ninebot to do this repair and not there Scooter?
My front tire is locked up on my es4, it spins but force is required and the scooter makes some bad noises, would this be a solution to it? Sorry i know this is fairly vague but its my first scooter and i have no clue what im doing, i dont have the app cause the scooter is modified.
After about a week of driving mine turning on the headlight of the ninebot makes the throttle not work, it won't drive. The rear lights blink as if I'm breaking and the display becomes a bit more dim. If I turn off the headlights again it works. I have put on an extra battery. Could this be a loose wire?
Peter Helstrup Jensen What the hell! I just experienced the exact same thing. I’m guessing there’s an issue somewhere in the handlebars too. Please let me know if you find a fix!
Gabriel Lundmark Fabian La Maestra I returned mine and got a new one in hope it was a fluke. I hope you find a solution and Segway acknowledges the problem.
Interesting! I disconnected the headlight and everything started working as expected again. Connecting a PC fan I had lying around to the headlight output did not cause the issue to reappear when I turned it on by switching on the lights. This tells me there's probably something wrong with the LED headlight, though it could also be the circuit board. Not sure as I don't have any similar load to test it with.
Gabriel Lundmark Segway attributes the issue to a defective circuit board. They replaced mine and it's working perfectly again. I find it remarkable though that you were able to connect a fan to it without issues as that seems to suggest a problem with the headlight.
If i dont have an error code but my acooter doesnt accelerate, could i still need to replace my throttle? My scooter doesnt accelerate no matter how fast im going to start
Hi guys I'm need a little help from you My es2 had a problem I used yesterday with heavy rain but I avoid the "River Streets" and when I come home and charge My es2 and used again the motor and break sounds weird and in mode sport go up to 12 km/h... What can I do??? :/
I followed all the instructions (was for error 14). Magnets were in place. Build all back together. Error 14 appears to be gone, but now no beeps anymore. Are you not pressuring on the little “speaker” when pressing out the display and that resulted in the kickscooter not making any noises anymore? I have ordered new charge brake and display circuit board just to be sure. Must admit that the kickscooter makes a lot of fun, but robustness is not that great.
No. He's pressing inside the little hole. The large where the wires comes out is where the speaker is. If you pressed it - yes very big risk ruin it and much more.
HifiCentret I saw it last Friday when replacing the handles controller / dashboard. There is indeed a little hole underwhich there is directly black plastic: that is where you need to press as it is then on the protective plastic cap underneath the dashboard unit. Learned it the hard way :/
I just bought an ES4 from Ebay, and from my research online the ES4 is basically just an ES2 with extended battery. However, the ES4 that I received has "matte black" steering column ( so pretty much all black) compared to many ES2 review videos I saw are all silver (like yours). For sure it is not an ES1 with external battery, because mine does have rear suspension and button led light. I am kind of confused why my ES4's color is different than others.
There was a limited production of ES2/ES4 that were produced in all black and usually cost a little more than the silver (sport model) Yes Bird scooters are black but they are ES1 models because they have a solid rear fork instead of having the rear suspension like ES2/ES4 models.
just needs a liiiiiiiittle elbow grease *arm snaps off* lol nice dgd soundtrack btw;) But seriously, how do you know if its a throttle problem in the first place? I dont get any error codes. But when I push the scooter it wont accelerate and the brake lights are blinking?
Hey Ryan! Sounds like you may be experiencing a control board issue. Please go to NinebotRepair.com and complete the web form. A technician will reach out to you.
I bought a ninebot es2 but it is blocked, what can I do? How can i unblocked?? I heard that changing an electronic card is the solution? But i dont know....please help me
Also where did you get your part from? Can you post a link? I got my part of the eBay seller I got the scooter from under warranty. I’d like to buy a spare.
Hey Ninebot U.S thanks for the video! I think is great. My brake lever is getting stuck when being applied. It's getting harder to ride cause I have to manually bring the lever up while I am trying to get going again. Should I change the piece or is this issue reparable? Also, the alignment of my ES2 is skewed to the left. Can you guys give me some advice as to how to fix this as well?? Thanks :)
Diego Zito check to see if your handle bar grip is too close to the lever. This happened to me. It just needs to be pulled away like 1/8 of an inch and the lever will snap back like it should.
Hello, I recently change the throttle because I had the error 14. Now the scooter works, but I note a sound, like a buzz. Do you know what could it be and how to fix it? Thanks a lot.
Watch out, the hole in the diagram marked to push your display out is the wrong one. Its not the the ones the wirse come out of like it shows in the pick, its the obviouse round hole above. When i tried that hole it didnt work so i tried going through where the wire were, thankfully the beepy speaker in there took all the force, hopefully it will stop beeping now. :) Thanks anyhow.
I got as far as reinforcing the 2 throttles and now my brake is stuck after putting it back together. if i unscrew that last screw, it has the natural movement..can someone help ? why did this happen ?
If the handlebars on the kickscooter es2 is turned about 5 degrees from the bottom (wheel is straight), is there any way to correct that myself or does is have to be turned in? Its brand new🙄 Great videos btw👍
I'm trying this repair but I can't get my display out. I've popped it out of the socket but it feels the cables are so tight I can't move it past being just pushed out of the socket. I don't want to potentially cause a new issue just to fix this one, anyone got some insight?
Please. I need help! Может кто подскажет. Долго катал на ninbot, но вот случилась проблема. Однажды включил проехал немного и всё. Включается показывает ноль и не показывает заряд батареи. Зашёл нажав на все "три кнопки" показал ошибку -"10". Что можно предпринять? Подскажите пожалуйста. Заранее благодарен.
My ES4 isn't working three weeks after purchase. The front wheel shutters and locks up. Power then completely cuts off. Warranty support prompts you to leave a voicemail but it has been a month with no reply. Very dissatisfied with this product because its poor quality and no service.
Could someone tell me how to change thr motherboar ( control brand) From the battery come 2 cables and the board only has room for black head. Thaaankss
Only a certified technician can replace a control board. If you replace your's, you will get an error 35 which means the control board needs to be activated. Only we have the program to activate them.
@ Niniebot U.S this vid , am new to the channel , I just got my self a new Es4 9bot as I love since I got it , love this vid glad I sub to your channel for mor awesome Info
Just completed this repair on my ES2 I bought 3 weeks ago and now speed is limited to 12 mph. Did I get the wrong part or is there something else I'm missing?
Have you had any luck with this? Ninebot U.S says ship it to their service center. This seems like it's clearly a firmware issue considering it is limiting itself to the exact speed of an ES1. If you lift the wheel off the ground you will see it momentarily spin up to full speed then throttle back to 20 km/h. I think maybe they use the same controller for both models and mine is now restricting speed because it thinks it's an ES1. I have not found a way to re-flash the firmware or do a "factory reset" to try to clear the issue.
So you replaced the throttle itself and it reduced your speed? I believe that has something to do with the dashboard circuit. It is not reading the signal from the throttle correctly.
When you replace a control board it has to be reprogrammed with the serial number of your scooter. The code 35 is on because it is an unprogrammed control board. You need to send it in to Ninebot US to have them reprogram your new control board.
Ninebots are literally the best Escooters till this day
Definitely agree I just wish they would fix the external battery problems on them 😂
You are the bomb Diggity, after spending several hours watching UA-cam videos you finally showy me how to seat the two throttle wire connectors into the correct area so I was able to properly seat the round Dashboard screen seats properly so it stays flush and seats properly. Again you are the man, A man among men with sword and pen!!! (seriously it’s been hours and hours that I’ve spent trying to find out how those connectors are supposed to go in so the dashboard seats properly.
(I think of you made a short video and titled it “how to seat your dashboard in properly” It would help a whole bunch of people just like you/it helped me.Once again thank you thank you thank you I just subbed your Channel.👍
Very explanatory! Firstly I was hearing a little sound coming from the throttle when I moved it, so I thought it was the magnet that went out (as you show in your other video), but when I opened it I saw that the sensor was broken. Anyway, thanks to you I managed to change the brakes by myself easily! Thanks a lot! =D
Omg you literally saved my life, I use mine to get to work and I really didn't want to have to get it sent off. thank you so much!!!
Thank you for posting this man! I wish there were more tutorials!
Would like to see some more videos on replacement parts for the Segway thanks for the video!
excellent tutorial !!! saved me lots of reverse engineering
Wait am I tripping? Is that some DGD background music. Perfect. Follow on that alone.
Very sturdy, and easy to clean.Excellent product
Thanks so much. Saved me $250 that i was quoted for a throttle repair !
I follow you step by step and finally I fixe my scooter. Thank you so much for your video
Thank you for this tutorial. I managed to fix my brakes after my spill this past week. You saved me a lot of money
How much to repair and where do j send for repair i have es4 that used to be a lime scooter
One week after buying my segway es2 it fell and the throttle broke. Just finish replacing it like the video and it was not that difficult! Thanks a lot... hope it will work fine :-)
hey, what's the list of screwers that you used?
@@quasa0 I have one set box of screws...
@@vcostasimoes i mean can you tell me which ones are required
i didn't quite get what the type of screwer you need at 2:30
Hey bro’ im from argentina and your video is the top! Me fue de mucha ayuda!
Great video , fitted mine after watching in less than 30 minutes. Any chance of a tutorial on misaligned handlebars ? As this seems to be a common issue too.
Thank you for this great video! You helped me perfectly through this 😊🙌🏼
This video just saved my life
Hey friend, do you have a video tutorial on how to replace the CONTROL BOARD on Segway ES2?
What could be the problem if the mine is just switch off during the travel and can't go more than 25 km/h in sport mode (ES4). First time it worked perfectly. Thank you,
I'm having the same problem here!
Thanks bro. I followed along and replaced it on mine with no problem 😊
Hi👋, have you any idea why i got rattling sound from throttle when i reach max speed on new ninebot f30e? When i go uphill rattling sound dissapears...
Do you have the wiring diagram for this model by chance?
Cool , but we’re do you buy parts for all these scooters . 🇨🇱🇺🇸
Can I fix the throttle rattle without removing all if this? Also do you have any advice on the folding area, I have so much movement
Please show a video on how to replace the internal battery assembly. Also, could you please make a video showing how to replace the front wheel.
All these will be added to our list to do for videos, thank you for your suggestions.
@@Ninebotus when will the intetnal battery replacement video upload on UA-cam?
@@MrMisterpag The Internal battery needs to be replaced by a certified technician. This is for safety and warranty reasons. Also note that in order to get access to the internal battery you will need to break the warranty seal. Once that seal is broken the entire warranty on the machine is voided. We know that some of our riders are technical or mechanically inclined and want to be hands-on. We just want you to be aware of the consequences of attempting to access the main battery.
@@Ninebotus what if I'm a second hand buyer could I still send it in to be fixed? Even with out a receipt
Whilst listening to Dance Gavin Dance, please
Thanks man!!! Extremely helpful!!!!!
Hello, I have de same error (14) Do you know where can I buy the throttle to replaced it? Thanks.
you can send email to sales@ninebotus.com
guys can you tell me where to buy tools are those hexa? i need to fix throttle but i dont have tools.thank you
Ninebot US, thanks for your videos. My es2 was working fine then after not riding for a week or so when I turn it on I get 1long beep followed by 4 short beeps.then it turns off. Can you confirm this is code 14 and should I replace the throttle? Thank you sir and I did subscribe to your channel.
Hello could you tell me what kind of screwdriver and the number to remove the throttle
Can you do videos on various Segway Ninebot Max fixes?
It worked!! Thanks a million!
Thank you, excellent tutorial!
My throttle recently become loose.. I think I slammed on it too much during an emergency stop.. Is there any way to send the unit to ninebot to do this repair and not there Scooter?
My front tire is locked up on my es4, it spins but force is required and the scooter makes some bad noises, would this be a solution to it? Sorry i know this is fairly vague but its my first scooter and i have no clue what im doing, i dont have the app cause the scooter is modified.
Is the same thing with the e25e ?
After about a week of driving mine turning on the headlight of the ninebot makes the throttle not work, it won't drive. The rear lights blink as if I'm breaking and the display becomes a bit more dim. If I turn off the headlights again it works.
I have put on an extra battery.
Could this be a loose wire?
Peter Helstrup Jensen What the hell! I just experienced the exact same thing. I’m guessing there’s an issue somewhere in the handlebars too. Please let me know if you find a fix!
Gabriel Lundmark Fabian La Maestra I returned mine and got a new one in hope it was a fluke. I hope you find a solution and Segway acknowledges the problem.
Apparently it isn't...
Interesting! I disconnected the headlight and everything started working as expected again. Connecting a PC fan I had lying around to the headlight output did not cause the issue to reappear when I turned it on by switching on the lights. This tells me there's probably something wrong with the LED headlight, though it could also be the circuit board. Not sure as I don't have any similar load to test it with.
Gabriel Lundmark Segway attributes the issue to a defective circuit board. They replaced mine and it's working perfectly again. I find it remarkable though that you were able to connect a fan to it without issues as that seems to suggest a problem with the headlight.
Thanks so much, this made a very confusing repair super easy!
If i dont have an error code but my acooter doesnt accelerate, could i still need to replace my throttle? My scooter doesnt accelerate no matter how fast im going to start
is this throttle compatible with another brand?
Hello. I'm french. Thank you for this vidéo 😉👍... it's perfect. Bye. Fabio
I get some vibration sounds from the throttle of my Ninebot G30 at higher speeds. What could be causing it?
Thank you very much for this tutorial my Kickscooter Ninebot ES2 is save.
What cable do I need to unplugged to disconnect bottom lights , I have a es1 and the app doesn't work in order to customize the color of the lights
Hey i was wondering if u can help me out my from well is relly lose is ther any thing i could do about it?
Sorry could I invert throttle and brake lever? I ven t the right hand and I want throttle on left side
same problem, same question. Did you allready solved this?
Hi guys I'm need a little help from you My es2 had a problem I used yesterday with heavy rain but I avoid the "River Streets" and when I come home and charge My es2 and used again the motor and break sounds weird and in mode sport go up to 12 km/h... What can I do??? :/
Did it. Fixed it. One hour.
Красавчик! Я по другому дисплей снимал, более сложным путем. Выдавить штатной отверткой - супер элегантное решение!
I lost the Phillips head screws holding the display down, anyone know the size? So I can get a replacement at my local hardware store?
ALOOOT Thanks!!!
Also, could you please share video of change tires?
I followed all the instructions (was for error 14). Magnets were in place. Build all back together. Error 14 appears to be gone, but now no beeps anymore. Are you not pressuring on the little “speaker” when pressing out the display and that resulted in the kickscooter not making any noises anymore?
I have ordered new charge brake and display circuit board just to be sure.
Must admit that the kickscooter makes a lot of fun, but robustness is not that great.
No. He's pressing inside the little hole. The large where the wires comes out is where the speaker is. If you pressed it - yes very big risk ruin it and much more.
HifiCentret I saw it last Friday when replacing the handles controller / dashboard. There is indeed a little hole underwhich there is directly black plastic: that is where you need to press as it is then on the protective plastic cap underneath the dashboard unit. Learned it the hard way :/
Could you please do Hiboy Max 3
Thanks for your help! I was able to fix my scooter!
i m using the ninebot segway max g30 . could someone explain how to do the same procedure to that scooter ?
Are those grips standard bike size? After seeing you pop it off I'm thinking I'd like to replace mine with some softer grips.
Hi Andrew, these handlebars are slightly smaller in diameter, you'd have to find one that fits on the handlebar.
Does this repair work on the ES1 as well? The grips are different on the ES1 and I'm not sure if the internals vary as well.
This will work on ES1 as well. Internal is identical besides the hand grips
Does anyone know of an active forum for Ninebot ES DIY fixes?
I just bought an ES4 from Ebay, and from my research online the ES4 is basically just an ES2 with extended battery. However, the ES4 that I received has "matte black" steering column ( so pretty much all black) compared to many ES2 review videos I saw are all silver (like yours). For sure it is not an ES1 with external battery, because mine does have rear suspension and button led light. I am kind of confused why my ES4's color is different than others.
Probably cause was a bird scooter who stole it and sold t o you
All bird scooters are black
There was a limited production of ES2/ES4 that were produced in all black and usually cost a little more than the silver (sport model) Yes Bird scooters are black but they are ES1 models because they have a solid rear fork instead of having the rear suspension like ES2/ES4 models.
just needs a liiiiiiiittle elbow grease *arm snaps off* lol nice dgd soundtrack btw;) But seriously, how do you know if its a throttle problem in the first place? I dont get any error codes. But when I push the scooter it wont accelerate and the brake lights are blinking?
Hey Ryan! Sounds like you may be experiencing a control board issue. Please go to NinebotRepair.com and complete the web form. A technician will reach out to you.
I bought a ninebot es2 but it is blocked, what can I do? How can i unblocked?? I heard that changing an electronic card is the solution? But i dont know....please help me
How much does the part cost?
I'm getting error codes 10, 14 and 15. Please help. Love the videos. Thanks
Is this usually covered by warranty? Mine had a problem when it was less than six months old.
Yes, all Ninebot/Segway products have a 1 year warranty offered by the seller you purchased from.
What do we do if the retailer won’t reply to warranty claims. My scooter has this exact error and it is 2 months old.
Please visit www.ninebotus.com/contact-us/ one of our technicians will get back to you to help.
Also where did you get your part from? Can you post a link?
I got my part of the eBay seller I got the scooter from under warranty. I’d like to buy a spare.
For any scooter parts for the Ninebot Segway Kickscooter, you can contact us for parts. support@ninebotus.com
Do you think it might be helpful to tell us exactly where you found a replacement throttle for sale?
Yup I forgot to include that, I have just included in the description
Hey Ninebot U.S thanks for the video! I think is great.
My brake lever is getting stuck when being applied. It's getting harder to ride cause I have to manually bring the lever up while I am trying to get going again. Should I change the piece or is this issue reparable?
Also, the alignment of my ES2 is skewed to the left. Can you guys give me some advice as to how to fix this as well??
Thanks :)
Diego Zito check to see if your handle bar grip is too close to the lever. This happened to me. It just needs to be pulled away like 1/8 of an inch and the lever will snap back like it should.
Does this work on the es4?
Hello, I recently change the throttle because I had the error 14. Now the scooter works, but I note a sound, like a buzz. Do you know what could it be and how to fix it? Thanks a lot.
Where is the noise coming from?
Watch out, the hole in the diagram marked to push your display out is the wrong one. Its not the the ones the wirse come out of like it shows in the pick, its the obviouse round hole above. When i tried that hole it didnt work so i tried going through where the wire were, thankfully the beepy speaker in there took all the force, hopefully it will stop beeping now. :) Thanks anyhow.
I got as far as reinforcing the 2 throttles and now my brake is stuck after putting it back together. if i unscrew that last screw, it has the natural movement..can someone help ? why did this happen ?
If the handlebars on the kickscooter es2 is turned about 5 degrees from the bottom (wheel is straight), is there any way to correct that myself or does is have to be turned in? Its brand new🙄 Great videos btw👍
thanks for your help.
I'm trying this repair but I can't get my display out. I've popped it out of the socket but it feels the cables are so tight I can't move it past being just pushed out of the socket. I don't want to potentially cause a new issue just to fix this one, anyone got some insight?
Cant remember the hole password to my scooter on the app is there a way to fix this ,maybe rebooting or something...
Please. I need help! Может кто подскажет. Долго катал на ninbot, но вот случилась проблема. Однажды включил проехал немного и всё. Включается показывает ноль и не показывает заряд батареи. Зашёл нажав на все "три кнопки" показал ошибку -"10". Что можно предпринять? Подскажите пожалуйста. Заранее благодарен.
The brake and throttle connectors should be inside of the gasket. There is room under the board when you separate bottom plastic housing.
Can you do the same video but for Xiaomi 365?
Ima try it out i hope it works cause I don’t have the warranty
Muchas gracias por excelente video, acabo de ordenar el acelerador, para cambiarlo, otra vez gracias 🙏
Thanks for the kind knowledge
I accidentally Wrecked my scooter and the throttle stick got jammed Forward do I need to replace that
Guessing this is a common problem, Mine had an error 14 code after 10 days of buying it. Fixed under warranty but now rattles a lot
There is a fix for the rattle, but it's not an official fix. We may shoot a video and shine some light on it.
Ninebot U.S. That would be very helpful. I am really unhappy with this as it is so annoying.
Please do a video!
Any plans to do the video please. If not could you please describe what needs to be done to stop the rattle. Thanks
Ninebot U.S. Please tell us
My ES4 isn't working three weeks after purchase. The front wheel shutters and locks up. Power then completely cuts off. Warranty support prompts you to leave a voicemail but it has been a month with no reply. Very dissatisfied with this product because its poor quality and no service.
Hello, my ninebot es2 does not charge or turn on
Could someone tell me how to change thr motherboar ( control brand) From the battery come 2 cables and the board only has room for black head. Thaaankss
Only a certified technician can replace a control board. If you replace your's, you will get an error 35 which means the control board needs to be activated. Only we have the program to activate them.
@@Ninebotus okay thank you very much . I have another question, in the battery the led is blue, when before it was red. Because it can be ? Thank you
H
I change the throttle but on the screen there is still the error 14? Anyone can help me
Is it always a "replace throttle" when error 14 shows? Can the error be just a loosen wire thing?
Sometimes yes, the connection may be loose or the screw underneath the throttle is too tight.
Sí puede resetear la contraseña Bluetooth?
Anyone know where to get a replacement steering handle.
Isiah please call us at 862-930-4079
Incredible scooter
@ Niniebot U.S this vid , am new to the channel , I just got my self a new Es4 9bot as I love since I got it , love this vid glad I sub to your channel for mor awesome Info
tnx, i have fixed my new ninebot es2 with error 14
Good video..
Where can I get a part..?
Please email sales@ninebotus.com
hola necesito comprar todo el timón toda la pieza me prodigas dar algún link o algún lado donde la pueda comprar gracias
Cual timón ??
De donde eres?
Yo he comprado el acelerador en ali express x tan solo 5 euros ... Gracias a esta explicación tengo mi patinete
Is there any chance to get that part in Europe?
Our company have different branches, you might want to contact Ninebot/Segway Europe for the parts so that it's easy shipping for you.
can i replace the handle by using bicycle handle?
I am not sure, I have not tried that before. I would think the handle is shaped differently than a bike handle.
After replacing the throttle my scooter only goes 13 mph On sport mode
como instaldo el sofware al patin
Just completed this repair on my ES2 I bought 3 weeks ago and now speed is limited to 12 mph. Did I get the wrong part or is there something else I'm missing?
I have the same problem after replace, @Ninebot U.S. any ideas?
Have you had any luck with this? Ninebot U.S says ship it to their service center. This seems like it's clearly a firmware issue considering it is limiting itself to the exact speed of an ES1. If you lift the wheel off the ground you will see it momentarily spin up to full speed then throttle back to 20 km/h. I think maybe they use the same controller for both models and mine is now restricting speed because it thinks it's an ES1. I have not found a way to re-flash the firmware or do a "factory reset" to try to clear the issue.
Did you connect it to the app and remove the initial speed limiter?
Sure did.
So you replaced the throttle itself and it reduced your speed? I believe that has something to do with the dashboard circuit. It is not reading the signal from the throttle correctly.
Hey I changed the control board and I have (error 35) somebody know how to fix it
Please send an email to support@ninebotus.com and we can help you get this sorted out.
Replace the part
When you replace a control board it has to be reprogrammed with the serial number of your scooter. The code 35 is on because it is an unprogrammed control board. You need to send it in to Ninebot US to have them reprogram your new control board.