Good morning pastor! Generally speaking, Im not a fan. But that was based on non rifled short adaptors. Shotgun/shotgun have always been great. But non rifled are not accurate. When I saw they made fully rifled and 16/18" was possibility.. WOAH NELLY, BACK UP BACK UP!! I got on the waiting list. It was a while!! Other calibers was tempting, but as a woods loafer, the 327 offers so many options!! Not ta mention its a hand-loaders and casters dream!! I have high hopes! I am concerned about my old 410... But will try not shoot any full house loads and am watching and choosing powders that deliver least pressure for velocity. I plan on another video or two at the range.
Just made shorts and videos of these Chazsel shotgun adapters. These are the best I have ever found! Most adapters smoothbore and only a few inches. 10/10 recommend Chaszel full length rifled chamber adapters
I remember these in the catalogs when I was a kid along with incubators and x-ray glasses that you could see through clothes. At least you have one of my “bucket list” kid’s dream items covered!!
Very good info on how it works & what it will or won't work with. They unfortunately are out of the 4 different ga/calibers & lengths I looked at. The 327 adapter should be fun. Thanks. 🙏👍🇺🇸☕
Looking forward to seeing how it performs. Seen several conversions fired but only at 7-10 yards. It would be more interesting to see some longer ranges shot such as 25 or 50 yds.
The green rifle is actually made by Savage, its their "turkey bottomlands" model. I have one in 12 gauge, very well made has a excellent trigger. If your adapter doesn't clear the extractor you can use a dremel to remove some more of the rim till it does. Some of Chaszels adapters don't have a extractor cutout at all so I cut them myself.
This will be very interesting. I was surprised to see fitment issues, but that means a good snug fit. A commenter on my .308 adapter shooting 32h&r got me thinking about having one of my adapters modified for .327...
I love adapters. I have little ones for 12ga converting to .357 and .45 colt. Actually pretty accurate! Very fun! And i've almost picked up one of those Stevens...🤔 Might still get one
I have several of these in 12ga 18" reduction. I have two in 410 with a 5" Length. One 38 special, the other in .327 federal. 12ga adapter calibers are as follows 45/410 8", at 18" 357 Remington maximum, 44 magnum, and 45-55 Walker. I intend to get two 12ga - 45-70 @ 24", as i want a double barrel setup. 12ga adapter are all used in my sighted rifled barrel i using for the 72-150 Mukwa express project. Mountain man
Mornin MM!! That was my first introduction. Two 45/70 inserts in a ScS with rifle sites! What a time regulating them!! But end was good preforming HAMMER 12ga - 45/70 gun!!!! That was twenty five plus ago and it stuck in my head! Mow I have one of my own. If it works well it wont be my last. Nicely made and finished. Stay tuned for range videos once this KOLD goes away!!
@@cw2a yea regulating a double may be interesting process. If I do this I have find the right double platform for it. Currently the only double 12 I own was my grandfather's. So not the right fit. Been hashing around in myself to what I want sxs or be different with over/under. Now that u did this video, I may do my 410 setup. Even though you showed a longer sleeve most likely I will stay with the 5" for convenience of a package size.
CW. Good and interesting video. I have seen another YT'er show short inserts for a 12 Ga that goes down to various calibers. I expect that long insert would be much better. Thanks for sharing and take care.
Yes 100%. The short "adaptors" for shot shells are awesome. But caliber conversions are mostly junk. Make them longer and add rifling it can be a huge improvement. Im hoping to get good results here. Thanks for the visit!! 👍🏼❤️🩹🙏
As you saw, Im tight in Beretta that I want it in. But that could be good. I did some fitting and its opening and closing and I fired a test. Hit POA!!
I've been trying to get him to make me one in 32 s&w long for years. He's always too busy though. I guess one of these would work though. Looking forward to your testing.
Agreed. Ill likely be using more 32 L AND h&R too but ability for the supah mag for "extra" is when put me over the top!! In my case, the shotguns strength is of a concern. It is a mono-block design, so thats better. But Ill still curtail top loads.
I would like to have an accessory barrel in 25 acp that is 16" long because when 22LR is all used up, 12 acp can still be loaded and at about 2 grains of powder to reload them, one pound of powder will reload about 3500 rounds!
@@firchkn7932 Good evening! No not at all. I mean it can be any length you desire! I prefer Rifled and at least 8-10" personally. But if dedicated as I had hoped this could be... I wanted FL.
There should be ZERO difference between surface of the primer. Head space should be unchanged. Chamber adaptor loaded with a cartritage should be flush with chamber end. Same as shotgun shell. If not, there is a problem with the adaptors chambering.
@@cw2a I'm not sure about the difference in rim thickness between .327 and .32 long. I wonder if that could be the issue? I don't have any .327 federal brass to check.
If its accurate, its gonna be a handy addition to this fun woods bumming gun. Next (if its accurate) is a "Side Saddle" storage along barrel when not in use!! 😜👍🏼🤘🏼😜
Yeah, the newest one is that Stevens and that takes choke tubes. But the folding half one is from the 50s that had a full choke. That H&R that it wouldn't fit in was probably a choke barrel. I've got a new Charles daily coming and I'm hoping that it fits in that.
@@HenryEberhardt-z3r It is supposed to fit all 410 single or SxS firearms. But if it actually would... Is a guess. I have four different 410 guns and it only fits in one. I think it could be made to fit in another quickly. And they others by shortening the barrel. I don't want to modify in that way st this time. I have another firearm coming soon and I will see if it fits this and decide.
@@cw2a Ok maybe I'll buy it and if it doesn't fit I'll return it but I think it will fit because it's has a 3 inch Chamber and total Barrel length is slightly over 26 inches. Thanks for the video and God Bless You And Family.
Hello Phil!! Calibers are all gonna be determined by gauge. So where a 12g might get a 45 ACP it wouldn't fit in a 410. But there complete line up should be on there web site. If its not available, sign up for email notices. Also if ya need accuracy, stick with rifled inserts. Good luck!
@mroilcat-b6x well it's not really that it's incorrect. But you're right a shorter insert would work fine. Thanks for watching Mann. I appreciate it.😜🤘🏼😜
This brand for some reason is rarely in stock. By the way it's pronounce shaz-el. I reviewed a 12ga to 9MM adapter last year and it worked well
Thanks man! I have had the non rifled shorties and nope not again. This is longer and fully rifled. So I have high hopes!
Chaszel makes some slick barrels. Their shop is about 20 minutes up the road from me. I’ve never ordered one but I’ve been tempted lol
Good morning pastor!
Generally speaking, Im not a fan. But that was based on non rifled short adaptors. Shotgun/shotgun have always been great. But non rifled are not accurate. When I saw they made fully rifled and 16/18" was possibility.. WOAH NELLY, BACK UP BACK UP!! I got on the waiting list. It was a while!! Other calibers was tempting, but as a woods loafer, the 327 offers so many options!! Not ta mention its a hand-loaders and casters dream!! I have high hopes! I am concerned about my old 410... But will try not shoot any full house loads and am watching and choosing powders that deliver least pressure for velocity.
I plan on another video or two at the range.
@@cw2a.32SW. .32 SW LONG .32 mag all interchangeable with 327
He does great work I need to do some load development and see just how tight I can get em
❤️🩹👍🏼🙏👍🏼🙏❤️🩹
cant wait to see the range report on this one. your 327 videos are my favorite ones.
Thanks man!! Waiting on Mother Nature here. Hoping next week. But weather people dont know tomorrow accurately. 👍🏼😛🤘🏼😝
Just made shorts and videos of these Chazsel shotgun adapters. These are the best I have ever found! Most adapters smoothbore and only a few inches. 10/10 recommend Chaszel full length rifled chamber adapters
@BullseyeBenR I didnt see notification...
Ill check!! 👍🏼🙏🙏👍🏼
@ sweet I appreciate that. Chad at Chaszel is a cool dude
I remember these in the catalogs when I was a kid along with incubators and x-ray glasses that you could see through clothes. At least you have one of my “bucket list” kid’s dream items covered!!
I forgot the hovercraft plans!
Hahaha. Thanks man! 🇺🇸👍🏼❤️🩹🙏
ive been on the wait list for over 6 months. The wait is killin' me CW.
@Ruteger100 Yea, I was a long wait. But worth it!!
Very good info on how it works & what it will or won't work with. They unfortunately are out of the 4 different ga/calibers & lengths I looked at. The 327 adapter should be fun. Thanks. 🙏👍🇺🇸☕
Thanks Bill!
Looking forward to seeing how it performs. Seen several conversions fired but only at 7-10 yards. It would be more interesting to see some longer ranges shot such as 25 or 50 yds.
Yes sir!!! I fired into my trap and it hit POA " 15' so a good start!! Stay tuned. Its fridged cold so might be a lil time.
@@cw2a Very good!
Yeah, been -10 degrees here last week and now finally up to 20 above. Too cold & windy to really have fun shooting for groups here.
I bought a ATI NOMAD 12 GA single shot and seven of these chazzel inserts I love these things,
Awesome!! What calibers??
@cw2a 30-30,35 Remington,44,45 LC and ACP,357 mag, and 400 ledgend
The green rifle is actually made by Savage, its their "turkey bottomlands" model. I have one in 12 gauge, very well made has a excellent trigger.
If your adapter doesn't clear the extractor you can use a dremel to remove some more of the rim till it does. Some of Chaszels adapters don't have a extractor cutout at all so I cut them myself.
@@caseyb1346 🔥👍🏼🤘🏼🤘🏼👍🏼🔥
The mail service is awful right now.
It was crazy long and just sat and a number if locations. But in same time I had Midway orders show up!!
I have seen such advertisements on the inserts barrel conversion. Looking forward for your test.🇺🇸👍
👍🏼🙏❤️🩹😛🙏👍🏼
This will be very interesting. I was surprised to see fitment issues, but that means a good snug fit. A commenter on my .308 adapter shooting 32h&r got me thinking about having one of my adapters modified for .327...
🤘🏼🙏👍🏼🙏🤘🏼
I love adapters. I have little ones for 12ga converting to .357 and .45 colt. Actually pretty accurate! Very fun!
And i've almost picked up one of those Stevens...🤔 Might still get one
Awesome! I love my shotgun adaptors. Haven't had good luck with a non rifled 22 or 38 spl.
I have several of these in 12ga 18" reduction. I have two in 410 with a 5" Length. One 38 special, the other in
.327 federal.
12ga adapter calibers are as follows 45/410 8", at 18" 357 Remington maximum, 44 magnum, and 45-55 Walker.
I intend to get two 12ga - 45-70 @ 24", as i want a double barrel setup. 12ga adapter are all used in my sighted rifled barrel i using for the 72-150 Mukwa express project.
Mountain man
Mornin MM!!
That was my first introduction. Two 45/70 inserts in a ScS with rifle sites! What a time regulating them!! But end was good preforming HAMMER 12ga - 45/70 gun!!!! That was twenty five plus ago and it stuck in my head! Mow I have one of my own. If it works well it wont be my last. Nicely made and finished.
Stay tuned for range videos once this KOLD goes away!!
@@cw2a yea regulating a double may be interesting process. If I do this I have find the right double platform for it. Currently the only double 12 I own was my grandfather's. So not the right fit. Been hashing around in myself to what I want sxs or be different with over/under. Now that u did this video, I may do my 410 setup. Even though you showed a longer sleeve most likely I will stay with the 5" for convenience of a package size.
@@cw2a at this point with my bad head/ eyes phone communication would be much clearer
I've got five of the 12 ga adapters. 22lr, 45acp, 9mm, 30-30, and 7.62 x 39
@@williamburch6792 Very handy!! 🇺🇸🤘🏼🙏🤘🏼
CW. Good and interesting video. I have seen another YT'er show short inserts for a 12 Ga that goes down to various calibers. I expect that long insert would be much better. Thanks for sharing and take care.
Yes 100%. The short "adaptors" for shot shells are awesome. But caliber conversions are mostly junk. Make them longer and add rifling it can be a huge improvement. Im hoping to get good results here.
Thanks for the visit!! 👍🏼❤️🩹🙏
@@cw2a I will look forward to seeing you test that out. Thanks.
Nice addition to the line up
Im hoping so!! Its such a fun bumming gun!
nice adapter CW... i like the idea of using shotguns for pistol loads in case of survival mode..
This is a favorite bumming gun made better if this can be accurate.
I enjoy the chaszel and other adapters, i did have to hand fit the chiappa brand 45 adapter to my mossberb o/u
As you saw, Im tight in Beretta that I want it in. But that could be good. I did some fitting and its opening and closing and I fired a test. Hit POA!!
These adapters are something else for someone who can't afford guns in other calibers and make there shotgun more versatile
Yes sir! As a "survival" set up I like this style.
I've been trying to get him to make me one in 32 s&w long for years. He's always too busy though. I guess one of these would work though. Looking forward to your testing.
Agreed. Ill likely be using more 32 L AND h&R too but ability for the supah mag for "extra" is when put me over the top!!
In my case, the shotguns strength is of a concern. It is a mono-block design, so thats better. But Ill still curtail top loads.
@@cw2a I'm planning to use it for more of a redneck rook and rabbit rifle. I've got a nicely figured litte Yildz 410 I'm going to use.
Well, I went to the website and he had a 16 inch 327 in stock so I ordered it. I've been wanting to do this project for years, so here we go...
Nice 🙂
I have the 357/38 for my 20 gauge single shot.. I want to add a 22lr
Thanks for sharing this brother
Glad that you enjoyed it! 🙏👍🏼❤️🩹👍🏼🤘🏼
in thinking of getting one of these to shoot 9mm from a 12 guage thought about a 9mm carbine but not really enthused with any of the current offerings
@GeorgiaRidgerunner they are inhibited by the sights on most shotguns. But if ya get at least 5" or so rifled. They can shoot pretty well.
@@cw2a Thank you sir ill keep that in mind
These are adaptors I could get behind. The little 3” ones don’t seem all that accurate or useful.
Agreed. These are different animal.
I would like to have an accessory barrel in 25 acp that is 16" long because when 22LR is all used up, 12 acp can still be loaded and at about 2 grains of powder to reload them, one pound of powder will reload about 3500 rounds!
@@archangel20031 😜❤️👍🏼👍🏼❤️😜
have ya thought about 22 Hornet or 218 bee?
A nice extra to have. I need to find some of them. I should get on the mailing list for them. 😀
Its s well made good looking barrel!! Im sure Ill make it shoot acceptably! 👍🏼🙏❤️🩹🙏👍🏼
Have an 18 inch 45 acp / 12 gauge, like it, works well. Intend to cut a rim recess so I can use 45 cowboy ammo.
@@dannyrowe6506 Sorry I missed this comment! 🙏🍗🦃❤️🦃🍗🙏
I just ordered one. Feb 25 it's now April 1st and it's still not in. Arriving late at every hub.
I think its the tube they ship these in.
Round tube are BAD NEWS for the package handling systems.
Its all on them not changing that!!
Nice, I have a 20 gauge to 357 mag 11" and it is sweet.
Hows it shoot?
Does the insert have to be the same length as the barrel ? Could you use in 24 inch barrel as example ?
@@firchkn7932 Good evening!
No not at all. I mean it can be any length you desire! I prefer Rifled and at least 8-10" personally. But if dedicated as I had hoped this could be... I wanted FL.
Very cool conversion!!
Thanks man. I have hopes its accurate.
That is super cool CW
Hello Chris!!
I hope it turns out good! Gonna be awesome if its accurates!!!
I got my adapter, but the firing pin on my little Yildz isn't long enough to hit the primer.
There should be ZERO difference between surface of the primer.
Head space should be unchanged. Chamber adaptor loaded with a cartritage should be flush with chamber end. Same as shotgun shell.
If not, there is a problem with the adaptors chambering.
@@cw2a I'm not sure about the difference in rim thickness between .327 and .32 long. I wonder if that could be the issue? I don't have any .327 federal brass to check.
@@eddieb1766 Rim thickness is the same. .055"
@@cw2a Thanks! I definitely have an adapter issue then. It runs fine with my 45 colt shotshells and factory .410.
They must of ran outa tubes. Mine came in just bubble wrap. So pissed off.
Yea was not impressed...
@@cw2a At least yours was in a tube. Your just upset at the time it took.
Pretty cool sleeve
😛❤️🩹👍🏼❤️🩹😛
Pretty neat ! Nice tool to have 👍
If its accurate, its gonna be a handy addition to this fun woods bumming gun.
Next (if its accurate) is a "Side Saddle" storage along barrel when not in use!! 😜👍🏼🤘🏼😜
is that new insert hitting the choke portion of the topper
Hello James, Good observation! No its close but not able to touch it. 🔥🙏🇺🇸🇺🇸🙏🔥
I remember some of these from early 1960's. Hope these work a whole lot better. 🙏 👍😁🌽
I hope so too! Totally different animal!!
The one it wouldn't fit in is a old choked barrel.... Your new ones take choke tobs at the end of the barrel.
Yeah, the newest one is that Stevens and that takes choke tubes. But the folding half one is from the 50s that had a full choke. That H&R that it wouldn't fit in was probably a choke barrel. I've got a new Charles daily coming and I'm hoping that it fits in that.
Morn8ng C-Dub! 🤛🏻🔫🇺🇸
Morning.
Where are you from? Can we order some adapters, is it possible to shipping us?
@@KaveiRock-ow5ui Apologies, i do not sell anything. Its not allowed on uTube. Google search this product.
Only shipped inside of the USA. F**k China!
...maybe mine will get here today!!
🙏🙏🙏
Will this fit in the Stevens 94D Single 26inch Barrel Shotgun ????
@@HenryEberhardt-z3r It is supposed to fit all 410 single or SxS firearms. But if it actually would... Is a guess. I have four different 410 guns and it only fits in one. I think it could be made to fit in another quickly. And they others by shortening the barrel. I don't want to modify in that way st this time. I have another firearm coming soon and I will see if it fits this and decide.
@@cw2a Ok maybe I'll buy it and if it doesn't fit I'll return it but I think it will fit because it's has a 3 inch Chamber and total Barrel length is slightly over 26 inches.
Thanks for the video and God Bless You And Family.
@@HenryEberhardt-z3r Thank you Henry! May god bless you and yours as well! ❤️🩹🙏🙏❤️🩹
What is the largest caliber they make ?
Hello Phil!!
Calibers are all gonna be determined by gauge.
So where a 12g might get a 45 ACP it wouldn't fit in a 410.
But there complete line up should be on there web site. If its not available, sign up for email notices.
Also if ya need accuracy, stick with rifled inserts.
Good luck!
@@cw2a 👍
BEFORE YOU SHOOT THAT 410--MIGHT BE BEST TO REMOVE THAT SCREW IN CHOKE
😛😝👍🏼 I thought about that too FUZZ! But Ill observe proper Follow thru and dont expect issues.
👍👍
Thanks my friend! Hope ya enjoyed it!
o yea survival... 5 wimp cartridges in a wimpy shotgun
Morning
Happy Thanksgiving!
🙏🙏🦃🍗🦃🙏🙏
Doesn't fit, no problemo. Just get the correct insert. For ALL pistol calibers, get the 8-9 inch inserts. Problem solved!!!
@mroilcat-b6x well it's not really that it's incorrect. But you're right a shorter insert would work fine. Thanks for watching Mann. I appreciate it.😜🤘🏼😜
👍👍
🇺🇸👍🏼❤️🩹👍🏼🇺🇸