Bosch 2 go Smart screwdriver Reviewed by tradesman
Вставка
- Опубліковано 18 бер 2022
- Bosch 2 go Smart screwdriver
The most important data
Torque (soft/hard/max.)
2.5/5/- Nm
No-load speed (1st gear / 2nd gear)
0 - 360 rpm
Battery type
Lithium-ion
Chuck capacity, min./max.
6.35 mm
Battery voltage
3.6 V
Clutch torque
0.2 - 5 Nm
Show more
BOSCH GO PROFESSIONAL: FURTHER INFORMATION
Product Highlights
Ready, set, go - the Bosch GO Cordless Screwdriver is intuitive and easy-to-use, enabling great working results in a variety of applications. Meet the unique needs of every situation by simply pushing the machine forward or pressing the 'on' button to begin thanks to the tool's handy dual-activation mode. Use the mechanical clutch to select the right amount of torque for each job with five torque settings or 'maximum performance mode'. Due to an electronic brake, this easy-to-control tool stops immediately after deactivation.
Equipment & Application
Bosch GO is intended for screw driving in wood, metal and plastic as well as working on filigree applications such as motherboards or electrical cabinets. It is compatible with all standard USB chargers.
Additional Information
The Bosch GO Cordless Screwdriver also features an easy-to-grip design for perfect handling when working in multiple positions. It has a fast and smooth operation, reaching speeds of up to 360 rpm for a consistently powerful performance.
IN THIS VIDEO
Electrician Amazon store - www.amazon.co.uk/shop/willsel...
FOLLOW US ON SOCIAL CHANNELS:
INSTAGRAM: / willselectricalservices_
TWITTER: / electricalwills
FACEBOOK: / willselectricalservices
TIK TOK www.tiktok.com/@electriciantv...
WEBSITE - willselectricalservices.co.uk
Electrical Work Needed - Get a Free Quote - Info@willselectricalservices.co.uk - Розваги
Your videos are improving greatly. I really liked the bits specifically for our Aussie friends. 😅
Cheers mate bit of a nightmare I only noticed it after it uploadedi bothered to change it I don’t think people got that far in my videos.
@@ElectricianTV i'm from aus and i can confirm this made the video 10x easier to watch cheers mate
Yep, I was just twizzing my pad about to reset the auto rotate lol
I use one everyday at work really. It's small enough to carry around with you. I don't use it so much for driving in screws these days, but it's perfect for isolators that break easily if you use too much power on.
Bought one for my mum, she does a lot of DIY & furniture restoration, but suffers badly from arthritis, she struggles to hand drive in fasteners & struggles a bit holding my impact driver steady when I loan it to her.
This wee thing seems like a perfect alternative.
Good to know it works upside-down and sideways also 😂🎥🎬
Thanks for the review!👍
No worries I’m glad you enjoyed it
Recently bought one myself at a trade show, and have to save came in real handy doing inspecting in a 5 storey council office, can imagine the number of switches etc I had to take off.
Great little video there Will lad 👍. Up the blues tonight ⚽️⚽️🔵🔵
Cheers mate
Absolutely love mine, I’ve got the first version of this bad boy and managed to get it cheap and use for my EICR bag as even though I’m
not that old my wrists do flare up now and again.
Too much misspent youth I’m sure 🤣🤣🤣 Like the look of this one though and was thinking of getting another to keep in the van so may well grab another of these, can’t fault it for the money.
Nice video Will, missed your content lately got the wee Bosch screwdriver love it for putting up the Aico smokes fits nice into your pockets hope to see the review of the M18 blower just got one last week and love it for blowing out the room before laying the underfloor mat👍
The blower is probably one of the favourite tools are both in recent times. Maybe I should do with you Cheers for the idea John
Turn my tablet upside down as I'm not Australian 🤣🤣, but another smashing video Sir
Bit rough round the edges , could do with some editing but authentic which is a plus point . Thanks for taking the time to review
Bocsh go 2 + gbh 18v 26f or gsr 18v 60fc(with sds attachment) = a perfect combo for drilling 6mm holes into concrete/masonry + driving screws into 6mm wallplugs (U-clips, saddle, 13A outlets etc)
Thank you
anyone tried or using the DEWALT DCF680G2 MOTION ACTIVATED screwdriver?
Thats good to know as I never knew milwaukee came in DIY range and pro range.
Thank you
Large parts video are upside down?
Really good video, just a heads up, some areas were upside down in the editing- Really good review, keep going!
If it had a high newton meter like the Armeg . I'd get it ? What u think ...
Would it be , ok on CU unit ...
Yeah it’s absolutely perfect on consumer units. Where the revolutions per minute or any 360 it’s not very far so you can Control it better
great
Can I use that on live wire?
Good video Will, have u tried the Whia speedee 2?
No I haven’t I found it was far too expensive
How does it compare to Bosch IXO 7? Which would be a better deal?
Sorry mate, I have no idea
👍👍👍 Will
Will, will this screw small screws into the wall (not plaster, from inside the house)?
Most definitely not. You need a masonry drill for that.
@@ElectricianTV Thank you
@@ElectricianTV Im going for the NoCry 10NM, check it out, it can actually manage light drilling.
do you have a cold?
No just a very large slong
Bought one of these - hate it!
The fwd/rev button on mine has a hair trigger, constantly turning on when I don’t want it to & the bits don’t lock in - my mate bought the Japanese Vessel electric driver… tons better 👍
I’m also thinking about buying myself one the vessel driver looks brilliant
@@ElectricianTV Mines inbound on Thursday from Amazon… I’ll let you know how I get on 😀
Just bought one of these badboys, sick of twisting away to put a socket face on when I have a million to do.
Im still using mine
I had the old Bosch PSR 2,4V Ni-CD ones, the first one Bosch ever made of its kind. Charger was dead, the Ni-CD cell was dead... it was time to go. Besides, it never had the power to do anything.
Theres is a clear indication on the other tool brands…price lol.
Not watching the match mate? 😂
I’m watching it in my office.
The milwaukee brushless drill is more powerful than the bosch professional drill. So therefore it isn’t a DIY tool and they don’t need to make it a different colour.
Yeah but the Milwaukee clutches are electronic and too slow to stop screw destruction with finer work.
We’ve all been there before with normal drills thank you for letting us know
Presentation and camera tilting is very irritating😢
Thanks for your comment Gay it encourages me to try harder next time it’s only a hobby
Drink some wa-ar, bra.
Thank you
I’m on my third one in 3 months already had 2 stop working.
The button starts to play up and then it won’t work, only works intermittently.
Don’t bother buying
Oh wow where are you buying them from. Surely not the same place mine is running like a dream has done for a year
@@ElectricianTV they are terrible I’ve just returned the 3rd to screwfix for a full refund.
Going to give the Makita a try
I’ve had two already too. They are not great, both would keep driving continuously after being taken off the screw which is dead annoying if you’re using them one handed whilst on a ladder.
Can you do this video in english?
These are great. My apprentices have the Go 2 same as this. I have a cheap amazon one lol. Nice video mate hope you are good.