1. Get 2 carpet tiles 2. Put both upside down, one against the column (tile A) and another directly against it (tile B) 3. Put a line on tile A where the tile would meet the tile if it were cut correctly 4. Measure the outside edges of the carpet that won't be cut by tile A and mark on tile B 5. (for the nail) use measuring tape to measure where nail will go by running it across the lines (freeze 0:02 and look at lines beside tile B) 6. (for the nail) Measure the carpet minus the two distances. Divide by 2 6a. If a carpet tile is 500mm, left side is 30mm and right is 10mm, do 500-30-10=460. 460/2 = 230. Go on left side of tile A to 30mm and add 230mm. Midpoint at 260mm. 7. put nail down, use string to measure midpoint like a compass and measure 8. Mark down, cut accordingly.
Damn tou need a remake and some explanation of this,the result look amazing
1. Get 2 carpet tiles
2. Put both upside down, one against the column (tile A) and another directly against it (tile B)
3. Put a line on tile A where the tile would meet the tile if it were cut correctly
4. Measure the outside edges of the carpet that won't be cut by tile A and mark on tile B
5. (for the nail) use measuring tape to measure where nail will go by running it across the lines (freeze 0:02 and look at lines beside tile B)
6. (for the nail) Measure the carpet minus the two distances. Divide by 2
6a. If a carpet tile is 500mm, left side is 30mm and right is 10mm, do 500-30-10=460. 460/2 = 230. Go on left side of tile A to 30mm and add 230mm. Midpoint at 260mm.
7. put nail down, use string to measure midpoint like a compass and measure
8. Mark down, cut accordingly.
How do you measure circumference etc
very awesome 👍
Hello!! I would to know how did you find where the centre of the circle is?
Didn’t really get much on how to do it
Please upload this video in detail