2014 Yamaha R1 cold start problem fixed
Вставка
- Опубліковано 30 вер 2024
- I fixed my R1 cold start problem I have been having for the pass two years. I have tried different batteries but same result. I replaced my starter now the bike starts right up on the first try even after sitting for a week. Mods done to the bike is a ECU flash by superbikeunlimited ,Toce exhaust ,cat delete and change my gearing. I purchase the starter from amazon here is the link.www.amazon.com...
![[UA] NAVI проти G2 Esports | Blast Premier Fall Final](http://i.ytimg.com/vi/QWlIm4FGESQ/mqdefault.jpg)
hi there.i just purchased a 2010 yamaha r1 and it have the same problem.the previous owner said that its been garage for about 2 months (i bought it knowing the issue).. he told me that when he turn the ignition on theres no mechanical sound.like when you turn it on you should hear some mechanical sound under the tank.then he’s cranking in up but not firing..what you think is the problem there? so that i will what im going to buy and replace..thanks
MountainbiKEN stuff you should here the fuel pump when you go to start it. It makes a whining like sound and you should be able to here it, if you don’t check the fuses.
FitR1_rider ok.i will try to have a look on that🤙🏽
MountainbiKEN stuff let me know how it goes
FitR1_rider i will let you know mate once i have it here..thanks bro🤙🏽
i just got the bike and when i turned on the ignition dash saying engine check,service,hi temp,and error 1,2.. what you reckon mate? haven’t check the fuse yet.reckon its one of reason too?thanks
Can you link the starter on amazon
Just added the link
@FitR1_Rider I have the same problem on my 09 R1 and had the same problem on my 12 R1 previously. Used all diff batteries and no luck. Bought an antigravity battery with 360CCA and still doing the same thing on cold days. I just wanted to ask if i spend the money on a new starter motor, How do i know it will fix the problem as the starter motor is the same model and part number as the one i already have. Its not like yamaha have updated the motor. The reason im asking is because i dont wanna spend 600£ on a new motor if it don't fix the problem.
Thanks.
Rydercbr change the starter it will fix the problem. I purchase my starter from amazon for under $100 because the OEM starter is two expensive and it sucks. I haven’t had any more problems on cold starts sense I changed my starter
@@FitR1Rider I been looking at the aftermarket motors that you use, im just worried if i get a cheap one it wont last because i ride everyday so need something reliable
Rydercbr sometimes aftermarket parts are better than OEM
@@FitR1Rider True, but how long will it last that's the question? It might work but not last as long. I ride daily so need sometging that works but also reliable.
Rydercbr I haven’t had any problems good luck !
Hey! Very nice video.
I'm about to replace my starter for the 2nd time within 11000km. It sucks balls, so this time I am considering trying the non-OEM. It can't be any worse it what I am thinking. How is your starter holding up at this point, bud?
Thank you!
Søren Bundgaard it’s been over a year no problems yet
@@FitR1Rider Thanks for reply. Ride safe!
Bruh I got same bike and set up my thang doing the same thing! I need your number
The2wheel Rolla change the starter bro it’s not hard just time consuming
You had to change coolant after? Did you loose taking it apart?
The2wheel Rolla yeah you lose a lot of coolant definitely change it with fresh new coolant instead of just adding .
I took starter out tested it on battery and it Ran smooth. I could even turn it with my finger do you still recommend changing starter??
The2wheel Rolla change the starter bro and upgrade the battery
hey bro i had the same problem it was my starter motor
nice
@@FitR1Rider thank you im glad u fixed it as well ride safe
Yamaha R1 you as well bro thanks
I just subscribed
Mine started like ur after instal video but was in wreck on Sunday 6/11/23 and now it struggles to fully pop off after wreck just sputters let it get temp in it and it pops off again no problem could this be the issue? No CEL no issues when running just hard first start
Does this bike value for my money? I'm looking 1litre bike now, Consider between this 2014 R1 n zx10r 2014, really wish it's reliable AF, or otherwise I'll get those conti lemon bike. Pls help me
My R1 is super reliable I put 30,000 miles on it. the only problem I had with the bike is the cold start issue. But the zx10r is a good bike also and might be a little faster than the R1. The R1 is a better looking bike tho.
@@FitR1Rider thanks mate for ur reply, will consider both, but for sure will go with one dat very reliable
Bro had the problem on my 2011 r1 but it starts when it gets hot and i shut it down and few mins later it wont go start until it cools down . Starter thing maybe ??
*liter
i could hear your idle drop rather drastically. my '13 r1 has been doing that as well.. any idea?
I have no idea man , when you find out let me know.
All Yamahas do that (and probably all other sports bikes that use a similar valve/shim system).
Brace for the explanation: When you "cold start" a bike. The bike... as you can imagine... is cold. The engine is cold. I'm not sure if you have ever done a valve adjustment before (likely not) but intake and exhaust valves are opening and closing to allow air and fuel into the combustion chambers to create power. They have to perfectly seal those ports and this game of opening and sealing is happening 8 times closing. 8 times opening per cylinder (x4) for every 2 rotations of the crank. Also it is a game of EXTREMELY tiny increments.. the 09 exhaust valve clearance acceptance is between. .21 and .25 .... like.... mm... like ...that's freaking tiny...my guy. So if idle is 1300 rpm, the crank is rotating 1300 times per minute, if you do the math,, there are around 2600 opens and 2600 closes of valves per minute in your engine just at idle. But an engine quickly gets hot and metal expands when it's hot, so engineers have to design the shims/valves to perfectly seal the combustion chamber NOT when it's cold, but when it's hot. If they made the valves the proper length for when the bike was cold, it would run for 10 seconds and then break the valves as they expanded from the heat.
SO, when you turn your bike on, it idles high in order to quickly get the engine to what's called "operating temperature.
This is why when you turn your bike on, you don't get a temperature reading UNTIL the engine is sufficiently warm. You are not supposed to take off and ride until the engine is warm because that's when the valves have expanded enough to seat cleanly. So yeah, when you start an R6 or R1 it idles quickly and then settles down. It's because the engine is now warm and the valves have expanded to seat the way they need to.
Did you ever figure out that low idle?
No
@@FitR1Rider bro did you tune the bike? it might be the tune. i have no idea tho just a guess
Shit is wet! That bloody red 🧨💥👌🏼
I just ordered a Lithium battery with 320 cca I been dealing with this for about a year now I’m now leaning toward it being a starter issue at worst case I’ll have a new starter if that ain’t it
Have the valves check also. Might need a valve adjustment
How is the idle going? I hear it in the video struggling to idle. Any changes since you made the video or is it running well still? I just got a 2010 r1!
Watch the last video I uploaded. I think the reason it idles like that is because of the ecu flash I had done. After the bike warms up it idles normal
FitR1_Rider got it! Thanks! Ride safe man 👍🏼👍🏼
How is the starter holding up?
No issues
hi, how did you get on with the non oem starter motor..... any good???
Lazy JB no problems works perfect
Bike starts right up on the first try now.
Yamahar1_rider Hi Sir! My friend's bike also needs to replace the motor recently. We are considering buying the same one as you, because the original product is too expensive....Can you tell me what is the current usage? thanks!
Can you make a video of the nosie your bike makes when you turn it on. Like turn on the bike back up a couple of feet then get close to record how it sounds so other R1 owners can compare the sound and see if our engines are making weird noises please.
Try Again sure when I have some free time I make a video. Will try to make one this week.
Yamahar1_rider thank you!
What kind of starter did you replace it with? OEM?
Artudatech Starter Motor Engine Starting 14B-81890-00 For Yamaha YZF R1 R1 2009-2014 2012 www.amazon.com/dp/B07K3WVKLL/ref=cm_sw_r_cp_api_i_c8twCb5WETPQW. Aftermarket starter I purchase from amazon for under $90
@@FitR1Rider Thanks for Reply
Do you have issues with smelling like exhaust with the under-tail exhaust? I’m thinking about getting a side mount because of it.
No, but the smell of the exhaust does get into your clothes.
@@FitR1Rider do you think it’s because the under-tail exhaust or would it do the same with a side mount?
I doubt it
Danke für das klärende Video, meine 2009er RN22 startet wieder normal nachdem ich den Startermotor gewechselt habe. Es reicht übrigens das Kühlwasser abzulassen, den Luftfilterkasten, den Ausgleichsbehälter und das Thermostat zu entfernen, dann kann der Startermotor an der linken Seite gewechselt werden. Gute Fahrt 🏍💨
Hallo,
bei mir hatte der Anlasser leider doch nicht den gewünschten Erfolg. Bei mir hatte der Sensor der Kurbelwelle, obwohl er sich nach Messung in der Toleranz befand, einen Schaden. Seit dem Wechsel des teuren Sensors startet meine R1 auch wieder mit meiner zwei Jahre alten kleinen Lithiumbatterie wieder zuverlässig, und das auch mach längerer Standzeit und kühleren Temperaturen.
Gruß
Do you have problem starting the bike in hot weather ride? i have the same bike and when i go on a ride on a really hot day if i shut the bike off i cant start it right away i would have to wait like 10-20 min to start back up.. do you know if thats a starter issue?
Sanjeevan Visvalingam I never had any starting issue in the heat only in the cold.
I have the same problem with the bike, after driving, 5-10 minutes, my bike stopped and does not turn on I do not know what the problem is
@@irvin0494 i haven't rode my bike since its cold. But most likely it would be starter. They get heat soaked
@@irvin0494 when was the last time you replaced the battery?
@@LLLTTTCCC I don't know, battery is work fine