Very very helpful. Probably one of the best training videos be seen. As a disabled vet fixing to start life on a very small fixed income some friends recommended I start to enjoy my hobby of woodworking (with toys for my grand kids and such) and expand into making patriotic things for fellow service members and vets (my son has been in 10 years and 5th generation navy so hopefully he’s a good salesman lol). With the exception of material and a little for overhead I’m hoping I can make the bills and instill a little honor and patriotism back into this great land of ours. Just learning but you have helped me tremendously with your instructions. I hope I’m able to pass it on to those I’m able to creat something for. Again. This Texan and Navy vet tips his hat to you sir. Wish I could do more, and perhaps I can someday. Thank you.
Excellent training video! The ever-popular waving flag is a great subject for learning Aspire. Learned about a million and six new tools and ways to use them. You did a super job of showing the tools as you used them. Keep telling us noobs every key that you're touching, even the basic and obvious ones. Very good instruction - many thanks from your newest subscriber!
Wow... I thought I was finally reaching a medium level user in Aspire. Thanks for putting my ego in check. I absolutely love this video. I know it is a lot of work to put these together, so thank you for your time and effort. You now have a new subscriber.
Great video. There's a lot to digest in this and it is pretty straight forward. I haven't gotten all the way thru the training yet, but one issue came up I was having a problem with around the 20 minute mark. In doing the baking of the duplicated level at that point, my version of Aspire 10 you can't bake a grouped set of components. They have to be ungrouped and I found that if you hold the Crtl key when baking it creates a level of unbaked components automatically. I was trying hard to see what you had done and I reverted to searching for the reason I couldn't get this to work right. At any rate, you have done a great job of providing instructions that make using.
Wow, I'm glad that I found your channel. Very clear instructions and easy to follow. Great that you show more that one options. I will have a look at your other videos :) Thanks
Fantastic tutorial, I followed step by step, sadly I couldn’t do the ripple effect because I don’t have the vectors for the sweep, pleas can anyone advice how that is done
Great video. I am brand new so bare with me on this comment. I believe the inner radius percentage should be 38 and not 40. If you zoom way in on the star the star is not perfectly flat across it has a very slight wave in the line. Very minor and I am not sure yet if it will show on the carve.
Actually the inner percentage radius, should be 38.2 for a constitutional star, you are right it is supposed to be straight across. I had made this tutorial before I knew that fun fact.
This is a great video and so helpful and inspiring to do different things BUT you missed 1 huge step that I can not get passed. I noticed it has happened on your project as well but you skipped it. At time 20:42 exactly when you baked the project it inverted it WHY????? and how do you get out of it??? The next sec you had already fixed the issue and moved on UPDATE: I did wind up fixing this but I am a little confused as to why it did what it did. Some how it took the last in the components and used it (stripes) as the baked properties and it named the file that. Very confusing. This is still a very helpful vid!!! Keep going we need you!!
I have a simple question concerning milling. If I am cutting with Inside Left does the 0,0,0 datum preserve the offset of the bit diam or is the 0,0,0 position dead center of the bit and then when routing the offset then takes effect? A simpler execution statement would be: bit starts out dead center on datum point then offset takes effect when cutting. I need a precision cut done but am not sure how the cutting offset is put in place. Trying not to waste material. Thanks.
Outstanding tutorial on making a flag! I followed it step by step and turned out great! How did you convert the Navy seal to a 3d component. I can't get any I find to have good detail. do you have a video on that ?
Great job and clear instructions. I was doing really good until the "baking" whereupon my stars went from protruding to recessing. Any ideas as to why? Thanks for a fine video.
To create a model it requires Aspire. VCarve Pro does not have the modeling tools required. Depending on the Feed and speed settings of the tool, this project to take 6 + hours
I am using the trial Aspire download to see if I can do this. I was tracking with you all the way until you got to "Lets add a wave" and you selected a drop down from the top screen of your 2D called stars stripes 2 (at around 22:00 in the video.) My question is do the ripple waves 1, 2, 3, and 4 come with the Aspire software or are those features you previously created. I don't know if those features are missing because I am using a trial Aspire or if those are your personal creations. Please advise, thanks!
The drop down menu with that you saw the top of the screen is the layers menu and in the layers menu is where you can store or place vectors that you've created the separate parts of your design this is not a feature or a program within the aspire trial or full version this is something that you would actually create within the aspirethe vectors for the Stars and stripes as well as the two rail sweep for the waves all of those were created using the drawing tools in the cad side of the software
As far as carving a wavy 3D flag with v-carve desktop yes but when it comes to creating the flag and building it like we're doing in this project that requires the aspire software
They are created by using the two rail sweep tool to create the rippled flag component and the waves based off the drive rails you draw and the profile of the ripple or wave you would create
Max the facebook group is for Digital Wood Carver customers only. If you are a customer email me at sales@digitalwoodcarver.com and i will get you registered.
@@SpindleTV well i do work all day long on router CNC, but i don't have a Digital Wood Carver Brand CNC. But anyway I like watching your UA-cam videos.
Very very helpful. Probably one of the best training videos be seen. As a disabled vet fixing to start life on a very small fixed income some friends recommended I start to enjoy my hobby of woodworking (with toys for my grand kids and such) and expand into making patriotic things for fellow service members and vets (my son has been in 10 years and 5th generation navy so hopefully he’s a good salesman lol). With the exception of material and a little for overhead I’m hoping I can make the bills and instill a little honor and patriotism back into this great land of ours. Just learning but you have helped me tremendously with your instructions. I hope I’m able to pass it on to those I’m able to creat something for. Again. This Texan and Navy vet tips his hat to you sir. Wish I could do more, and perhaps I can someday. Thank you.
Excellent training video! The ever-popular waving flag is a great subject for learning Aspire. Learned about a million and six new tools and ways to use them. You did a super job of showing the tools as you used them. Keep telling us noobs every key that you're touching, even the basic and obvious ones. Very good instruction - many thanks from your newest subscriber!
Wow... I thought I was finally reaching a medium level user in Aspire. Thanks for putting my ego in check. I absolutely love this video. I know it is a lot of work to put these together, so thank you for your time and effort. You now have a new subscriber.
Excellent tutorial Laney!
Great video. There's a lot to digest in this and it is pretty straight forward. I haven't gotten all the way thru the training yet, but one issue came up I was having a problem with around the 20 minute mark. In doing the baking of the duplicated level at that point, my version of Aspire 10 you can't bake a grouped set of components. They have to be ungrouped and I found that if you hold the Crtl key when baking it creates a level of unbaked components automatically. I was trying hard to see what you had done and I reverted to searching for the reason I couldn't get this to work right. At any rate, you have done a great job of providing instructions that make using.
Excellent tutorial. Clear instructions. Made a complex project doable. Thanks!
Great video. Worth the 1 hour of my life. I learned more than I though I would, great job! Liked and subscribed.
This is one of the best videos I have ever seen. You rock dude!
Wow, I'm glad that I found your channel. Very clear instructions and easy to follow. Great that you show more that one options. I will have a look at your other videos :) Thanks
Laney, Thanks you so much for sharing this video. This has been extremely helpful to me as a new user of Aspire & CNC.
You are very welcome
Fantastic tutorial, I followed step by step, sadly I couldn’t do the ripple effect because I don’t have the vectors for the sweep, pleas can anyone advice how that is done
Wow man, absolutely great video. THANK YOU!
Great video. I am brand new so bare with me on this comment. I believe the inner radius percentage should be 38 and not 40. If you zoom way in on the star the star is not perfectly flat across it has a very slight wave in the line. Very minor and I am not sure yet if it will show on the carve.
Actually the inner percentage radius, should be 38.2 for a constitutional star, you are right it is supposed to be straight across. I had made this tutorial before I knew that fun fact.
gostei muito da sua aula , muito bem explicada obrigado!!!!!!
Great video....you really have aspire down.....I made a flag off your instruction...Good stuff!!
Excellent tutorial, thank you!
This is a great video and so helpful and inspiring to do different things BUT you missed 1 huge step that I can not get passed. I noticed it has happened on your project as well but you skipped it. At time 20:42 exactly when you baked the project it inverted it WHY????? and how do you get out of it??? The next sec you had already fixed the issue and moved on
UPDATE: I did wind up fixing this but I am a little confused as to why it did what it did. Some how it took the last in the components and used it (stripes) as the baked properties and it named the file that. Very confusing. This is still a very helpful vid!!! Keep going we need you!!
Thanks Laney - awesome tutorial!
Very good video . Great job . Thank you very much . I learned a lot
I have a simple question concerning milling. If I am cutting with Inside Left does the 0,0,0 datum preserve the offset of the bit diam or is the 0,0,0 position dead center of the bit and then when routing the offset then takes effect? A simpler execution statement would be: bit starts out dead center on datum point then offset takes effect when cutting. I need a precision cut done but am not sure how the cutting offset is put in place. Trying not to waste material. Thanks.
How long was your carve time? Would you mind doing a video for speeding up toolpath times?
Outstanding tutorial on making a flag! I followed it step by step and turned out great! How did you convert the Navy seal to a 3d component. I can't get any I find to have good detail. do you have a video on that ?
on the modeling i dont have some of the components on my Vcarve pro 11?
Great job and clear instructions. I was doing really good until the "baking" whereupon my stars went from protruding to recessing. Any ideas as to why? Thanks for a fine video.
You just need to click on the Wrench tool Component properties and change the combine mode to Add.
Great tutorial! Do you have one on making a flag without the wave?
Great tutorial !!!!!! thanks alan
Very good video, thank you.
2 Questions: 1) Can this be done in Vcarve Pro or do you have to have Aspire? 2) How long would it take the CNC to create the wave flag with logo?
To create a model it requires Aspire. VCarve Pro does not have the modeling tools required. Depending on the Feed and speed settings of the tool, this project to take 6 + hours
Hello, i'm new to cnc, just wanted to ask do i need to purchase mach3 to operate the cnc or vectric aspire does it all ?
I am using the trial Aspire download to see if I can do this. I was tracking with you all the way until you got to "Lets add a wave" and you selected a drop down from the top screen of your 2D called stars stripes 2 (at around 22:00 in the video.) My question is do the ripple waves 1, 2, 3, and 4 come with the Aspire software or are those features you previously created. I don't know if those features are missing because I am using a trial Aspire or if those are your personal creations. Please advise, thanks!
The drop down menu with that you saw the top of the screen is the layers menu and in the layers menu is where you can store or place vectors that you've created the separate parts of your design this is not a feature or a program within the aspire trial or full version this is something that you would actually create within the aspirethe vectors for the Stars and stripes as well as the two rail sweep for the waves all of those were created using the drawing tools in the cad side of the software
No other way than to subscribe!
Love the tutorial, Any way I could purchase a copy of the file? new to aspire and feel a little overwhelmed.
Bryan you can email me at sales@digitalwoodcarver.com about a copy of the file
Wow!! nice video. Where can I get the Navy logo?
very cool, thanks
I have one question what kind of computer are process are you running because mine's dragging. A--
I use an Acer Aspire 15 model laptop and my desktop is a HP Pavilion 8 gb RAM, AMD A10-5700 APU with Radeon HD Graphics Processor.
Not sure if anyone will still see this years later. Will this work with my Vectric Desk Top? I realize my size limits.
As far as carving a wavy 3D flag with v-carve desktop yes but when it comes to creating the flag and building it like we're doing in this project that requires the aspire software
Thanks for responding. I’ll try to find a file and import it and see what I can do. Great channel!!
@@michaelmorrissey765 email me at laney.shaughnessy@spindletv.com and ill send you a wavy flag model file
Does anyone know if I were to put and object on the flag and wanted it flat how would I go about it?
Look at my 4th of July class or one of the other flag classes.
Great tutorial. Thank you. How did you get your measurements, and how would I go about scaling them up?
Once the star field is created it can be scaled to any size. You would keep the aspect ratio the same when sizing up
I'm a complete Novice here, where do the ripple and wave layers come from?
They are created by using the two rail sweep tool to create the rippled flag component and the waves based off the drive rails you draw and the profile of the ripple or wave you would create
That was great. I wish the file was available to make it easier to follow your instructions.
Aaron you can email me at sales@digitalwoodcarver.com about a copy of the file
Why dont I have those options in my modeling tab?!
Mike what options? And if you have VCarve Pro you would not have the modeling tools. Those are Aspire features.
Can you do this same project in Vectric Vcarve Pro ??
bump?
The star field is not square. You need to get the correct proportions.
Can this be create on V carve Desktop?
With the flag model imported yes. But you need Aspire to actually build the model
how do i get in your Facebook Group
Max the facebook group is for Digital Wood Carver customers only. If you are a customer email me at sales@digitalwoodcarver.com and i will get you registered.
@@SpindleTV by Digital Wood Carver customers you mean CNC customers.
@@maxsmith2320 owners of Digital Wood Carver Brand CNC units
@@SpindleTV well i do work all day long on router CNC, but i don't have a Digital Wood Carver Brand CNC.
But anyway I like watching your UA-cam videos.
This time I will use Woodglut plans for this.
Excellent sir can you send me your email