Fusion (sync) backup camera failure fix.
Вставка
- Опубліковано 6 вер 2023
- This is a quick video on how to fix your back up camera using basic tools if you are currently getting this message or your backup camera is not working. This is shown on a 2014 Ford fusion. But this will also work on any other SYNC Ford models.  this message appears when the camera goes bad, and this fixed can be done for $50 and in under 20 minutes. I hope this helps somebody out, don’t forget to like and subscribe. Thank you! 
omg. Thank you! I knew my camera came unplugged somehow and I'm going to fix it asap with this. No idea I could access it from inside the trunk.
Did all this got the camera installed just made a small hole for my 2014 ford fusion to screw it in then I tied the wires to my left headlight cause of some other UA-cam and the camera still ain’t work. Basically asking where the heck do I wire it to get it to work.
If you buy the stock camera it just plugs right in. If you’re adding a camera it’s a whole different story
I find three things neat woth this; One, mine is a 2016, but looks exactly the same as yours, two we live in the same state, and three, oir playes are nearly identical.
Also gonna have one hell of a day now to do this
Haha good luck. You got it
Were u able to snap_off the latch assembly, plastic cover on the outside ? ( about 45 secs. video). No luck here...
Hell of a time...but I got it off, by inserting a small screwdriver 🪛 around the latch, and pulled the cover off, .. .. ( Not on the video) LoL
I see the install, re_istall process, but just to be clear, was the main issue, a camera replacement, for a new one?
@@wholio50 exactly. Took out the old, put in a new one. No issues since
Are you saying to just unplug and plug back in or just replace it? I think you said replace bc you said something about amazon but wanted to make sure
Yup just replace it. Haven’t had a problem since
@@justthetipgarage5305 makes sense. Mines been working intermittently. I just did what you said to do but just unplugged it and see if that would fix it. But nope It didn’t lol I got one on the way from Amazon now- thanks for the video. I’ve been racking my mind around it I was really hoping it wasn’t the sync system.
Yea mine did the same thing. Switched out the camera and it’s worked fine ever since
@@justthetipgarage5305 Hell yea-thanks!
@@justthetipgarage5305 Replaced my camera yesterday and its so nice to finally have a properly working camera! Best $60 Ive spent in a while lol crazy to think that the dealership could have charged literally anything…
Do you have the Amazon link to the camera ?
Just search it on there. It was easy to find when you type in your vehicle
@@justthetipgarage5305i can’t find the camera on amazon, is it possible to send a link, also does it have to be the stock version
Change camera?
Yup that fixed it
So I have 2020 ford fusion hybrid plugin. And my ford pass doesn't work. Well after 3 months ford has finally found out why. Well they say that the modem in car is 3g and north America has quit using it and that I would have to upgrade to 4g module and the customer is responsible for the cost. To the tune of $800 and something Canadian funds. I asked ford canada why does my 2020 have 3g but my friends 2017 f150 have the 4g as his still works. Now the only reason I cared was ford dealer told me that because the car was used the other first owner had registered the car with ford pass and that they could start my car from anywhere. So they were going to change out under warranty but yesterday after waiting months for the part ford got ahold of dealer and gave them the 3g excuse. So my problem is why would they put something that doesn't work in newer vehicles. To me sounds like these hybrids were put together with old parts that they could not use in there big sellers like the trucks.
Yea that sounds wrong to me. But I don’t have any experience with ford pass