Peugeot PX10 restoration and build. Classic vintage road bike 1972
Вставка
- Опубліковано 5 тра 2023
- This is the last of four videos on this bicycle. If you would like to see details of the frame being cleaned and the bearings getting overhauled please see the links below and at the end of this video. We totally rebuild my neighbors childhood road bike. We overhaul everything, add new brakelevers, tape tires, spokes and cables. Please leave your comments below.
Music by Bensound.com
Part 2. The tear down • Vintage Peugeot PX-10 ...
Part 3 Overhaulding the bearings • 72 Peugeot PX10 restor...
I lusted after one of these when I was a kid. Excellent work bringing it back.
Thanks. Seems to have been a favorite in the 70s!
I’m another one who lusted after one of these. My parents bought me a UO-8, with its heavy steel rims and cranks, and I did love it, but the catalog pics and specs of this one were always on my mind when I rode. 😄
Your story explains exactly why I have this sickness. When I had a Schwinn world sport, I wanted a LeTour. When I had a LeTour I wanted a Voyager. When I had a voyager I wanted a Schwinn Paramount. And what does an older guy do when he has a couple bucks. He buys them all LOL
Thats a beautiful garage you have there, love classic cars and vintage road bikes!
We love details !!!
as far as i am concerned your a superstar here here
LOL> Thanks! I appreciate your comment and thanks for watching
your level of expertise is otherworldly
LOL> I have you fooled!
I had the exact bike in Tampa in 1975. I briefly got caught up in the Italian thing because our club was sponsored by Coppi. But went back to another PX-10 not long after the Coppi Craze. There's nothing like 20 pairs of Mafac Racer brakes Squealing while going into turn one of a Category 4 criterium.
Are the brake levers correct? Mine were just drop bars levers, not including the extention levers.
I'm a bit late to the party but black boot polish will restore the plastic on the derailleur. Works for me anyway 🙂
This was my first dream bike. Had just begun riding a ten speed and rode to Desmond's Cycles downtown San Jose CA. Old school shop, wood floors, wood w/glass display cases. The PX10 was on the upper rack row so couldn't even get very close, but I was mesmerized.
I understand that. It was probably a standout bike back in the day. For my time, in the early '80s it was the Schwinn Paramount that I would covet.
I guess there are some French threaded bottom brackets around
I raced a Paramount track bike 1984-1992@@JohnsVintageRoadBikeGarage
Great bike
Thanks!
I’m in Milwaukee and really enjoy having found your videos.
Ah! close to home. Glad your watching.
old motor oil or automotive trim restorer works wonders on the old simplex plastic bits
You put on different brake levers. It originally had the cheat levers for if your hands are on the top of bars. Nice upgrade. Thanks for not ruining it with Campy
I tried to find some Mafac levers, but everybody wanted $150 for levers with decent hoods.
Watching you build these bikes bring back LOTS of memories of when I start out riding. I built everything from hand me down parts. My first real frame was a Somec that was stripped of paint. I painted it and put hand me down Campy Chorus 7 speed. LOVED that bike. Thanks for taking me on a trip back in time.
Glad you enjoy. I dont have the guts to try painting my own bike!
@@JohnsVintageRoadBikeGarage Back in those days painting the bike was a spray can. I did do two colors and it looked like crap. :-)
I have a Peugeot PFN-10 I bought new and I thought it was a good looking bike then and now. I changed the components to Campy Chorus and moved the shifters from the down tubes. I like the look of your PX10, iteresting video!
Thanks!
excellent job and very beautiful bikes. Warm greetings from Netherlands
It was a Motobecane Jubilee that caused me to even look at French bikes and that started the heartbreak and joy of them. It was that Huret Jubilee RD start the bike I picked up was used hard but not abused and once cleaned it had the scratches you expect of a beloved bike that had been used as intended. Then I came across a Gitain tour de France. That must have been kept inside for 50 years and that plastic Simpex derailer. During the bike boom, I saw plenty of them and thought what a piece of junk s**t. Then never thought of them again. While cleaning it all up my goal was not to replace anything that didn't need to be replaced. Clean and regrease all the bearings... Shifter cables were corroded so off they came and then entered the wild world of Simplex aerospace plastics. started working on adjusting the RD as it turned the crank with the bike on the stand the chain was bumping as it a link was stiff and then parts of the jocky wheels just dropped out onto the floor. I couldn't find a ready source for French jockey wheels. As it happened the bike had been factory spec with a very nice Sugino Mighty crank. So plan B. And this is what I suggest to you. The drive train was already part Japanese I got the period correct Suntour Cyclone derailer and a power down tube shifter. On the whole, it is a better bike than when it was new and Gitain started it when the picked that Siguno crank. It called for tapping the drop out and adding a flat nut. Still to my eye that first-generation Cyclone Derailer looks a lot better than that plastic thingy. Oh, and the bike came with Mafac Competition brakes a step up from the Racers. The French will break your heart and cut you too plenty of razor-sharp edges on them.
Thanks for the history. If I were concerned about performance I would make changes. Im pretty much showing these bikes as much stock as I can to show the history. I have many other superior handling bicycles I could rely on. The Cyclone derailleur was a total stand out in its day. Great choice!
I have one of those Simplex derailleurs on a shelf in my bike shed.
new old stock?
@@JohnsVintageRoadBikeGarage Afraid not. It's used but in good shape.
with this work of your here an audience with the pope is hearby Granted BRAVO
Thank you? I think? LOL.. I appreciate you watching!
Great work there! Dull plastics can be darkened by a hot fan. it closes the surface again 👌🏼👍🏼
Had this same issue with Simplex plastic graying. Vaseline and a microfiber cloth will restore it to like-new!
Thank you, thank you
TOP TIP: Simplex black plastic is made from Delrin which has the unusual quality, when dry and brittle, of "rehydrating" itself with oil. To renovate back to original condition, no buffing wheels, just clean then soak (no danger of over soaking) in oil. I use old engine oil. Seriously, it works.
Awesome. Thanks!
I got one similar latter year in Goodwill
Thats a lucky find!
With regard to graying on plastic, I've encountered similar problems with ABS camera finished cargo boxes from Yakima/ Thule. I've used 303 protectant and it helps but doesn't eliminate the problem. Moving up the ladder I tried Back To Black and it's mostly heavy ArmorAll that you really have to let soak in ( possibly heat up with hair dryer). Somebody makes a bumper restorer that's like $70 for a tiny bottle and that's what Honda Element folk loose their shit over ( haven't tried that). I have had fishing reel side plates gray up before and remedied that with some type of gunstock oil by Birchwood Casey but it leaves the part a bit greasy. Also a wipe with boiled linseed oil may darken it back up. Sorry I don't have direct empirical knowledge of your Simplex but I've seen hundreds of those with that same condition including the wing nut thingies for the shifters. The trick is when cleaning one not to soak it in anything super nasty. Same goes for cargo boxes...don't blast a shitload of purple cleaner on one in direct sunlight and expect it to still be black when you get back from Starbucks with that massive Vente Nuovo Tipo Super Intercorsa FrappaCino.
Thanks. My neighbor actually works for 303. He's given me some stuff. Thanks for watching
Lovely clean and build up John, the bike turned out beautifully 👌🏼 Don’t stress burning the delrin, I doubt any structural damage was done 👍🏼
Thanks!
I had an old Peugeot back in the day with cotter pins holding the crank arms on. Loved that old bike. No one could get parts when I owned it. Forgo about that bike until I saw the thumbnail for your video.
Love the old Cottered cranks. When I worked in a shop we used to go through cotter pins all the time. Now you never see them.
Did a good few newspaper rounds to buy this bike out of a Paisley, Scotland shop window. I wondered where it ended up after getting nicked late 70's somewhere in Glasgow 😁
IT could be anywhere. It was hard to get that first good bike!
I know, I remember going on Scottish island tour with a pannier full of spare tubs as it came with tubular tyres off the shelf, what an amateur 😅, good memories
I have this exact bike. It still has its Wastyn Cycles decals on it too. I think it was purchased new and ridden perhaps for one year.
That is so cool. They were on Milwaukee avenue correct?
VW guy too i see. Me too. Just got into vintage cycles. Got my first one. Motobecane super mirage out of the dump in really good shape.
Great bike to start! Unfortunately that VW belongs to my sister inlaw. I love it though
What a great restoration!
Thank you!
i use graphite grease on most bearings. it's filthy but rubbing it into that old greyed out black plastic works quite well.
Thanks!
I had a PX10J that I purchased in 1976 that looks very much like this bike. It came with tied and soldered tubular wheels with high flange hubs. Over time I replaced all the original Simplex components with their gold top of the line ones that won the Tour. Later I stripped all the paint (keeping the chrome), filed down all the lugs and had it repainted with Dupont Imron. It was a nice bike and looked great but I ultimately sold it after I got a custom steel frame made which I built up with Campy. I wish I had kept it but I have good memories from all the miles I put on it..........
Im with you. I've sold bikes that I regret! Some more sentimental than anything else. Esp since you put all that work into it! Thanks for watching.
My dad juts gave me his PX10. I was waiting for your video to see what you did before I stripped down the bike and rebuilt it.
One advantage I have, all the parts are original. It definitely needs some TLC. Thanks for sharing
They are great bikes. I only wish this one was my size!
This brings back memories. 70's French bike!! I've never owned Peugeot but always wanted on.
Nicely done.!!
You're really good sir. I'm Filipino sir, thank you for teaching me. My roadbike is built. It's a little old. 😊😊😊
Good to hear from you Sir, I love old road bikes. What kind do you have?
Linda bicicleta , como todas as outras. Se tu quiser pode mandar uma para o sul do Brasil.... Kkkk abraço.
great job John i love old bikes, i worked at the Raleigh factory in Nottingham in the 70s and made lots of bikes up. regarding the grey plastic i had the same thing on my transit van bumpers i used a heat gun to solve it and they ended up good as new.
Thanks. I have to try all the suggestions that people gave me!
I learned from another vintage bike chanel, cant remember which one now, but delrin was supposed to be fed a light oil to keep it from cracking and that also keeps the colour black. Nice looking bike at the end
Probably some truth to that!
I love those old racing bikes. I got into cycling in the late 80s as a teenager.
My Cross Country coach had the same bike (or very similar, probably more of a touring version because it didn’t have sew ups) and I remember him using his bike to ride while we ran to help us train. Good memories… thank you.
Thanks! I appreciate you watching
For polishing just use never dull ✊🏼
Not familiar with that
Really nice, gut job. I just gone start my own project, with very little knowledge. My first two bikes. One Peugeot, just similar like you and second one is a Mercier. I hope will get it.
You can do it! Plenty of help on UA-cam if you dont know how to do something! Good luck!
Think Ive seen colour restored on plastic with heat gun. Great video I always find the French components hard work
Thanks for the tip!
Superb video. One of the best I’ve seen and quite therapeutic strangely enough. George UK
Therapeutic? Curious what you mean by that? If you would care to explain. Thanks for watching.
@@JohnsVintageRoadBikeGarage
Hi - Calming and relaxing. A compliment to your presentation skills.
@@georgeshaw6207 Thanks. My aim is comfort TV for vintage bike geeks
Strong light 93, prettiest crank on all time
Wait till you see the stronglight that I'm going to put on my Jack Taylor in an upcoming video! Thanks for watching
hi john, i've heard 'flood penetrol' is good to bring back the black luster of plastic bumpers. you might want to give it a try.
Lovely work ! Thank you for sharing :) Mine is a 1976 PX-10. Looks identical, but I changed to clincher tyres & Mavic rims to accommodate.
That was probably a common change made on those bikes. I always wanted one with the nervex fancy lugs but haven't found one in good shape. Thanks for watching.
John, great job on the PX10! “It’s not wrong, it’s just French!” Came to mind during your build. Gotta stick a little piece of cork in the hole in the back of the stem. The Weinmanns are way better levers but I was surprised you didn’t go with MAFAC levers given that all of the other parts are accurate to the build and the MAFAC levers are a dime a dozen. Another fun video. Thank you.
Im with you on the Mafac levers. I could only find NOS and they were too much doh. Looking for a reasonable pair with decent hoods. The bike came to me with safty levers. LOL Thanks for watching
I weep when I see small scratches on fine art. Jon, touch up those bits with white.❤
I hear ya linda. But this frame is pretty far gone. Im going to probably touch it up soon. But all the old touch ups turned yellow.. We'll see. Thanks for watching
Great job John, looks beautiful!
Thanks Jon
John, another possibility for restoring the black and original sheen of the Delrin parts is to use a very light smear of Vaseline on the plastic. Allow it to soak in for a while and then wipe it clean with a paper towel. That should buff it right up.
Wow, I haven't heard that solution yet! Thanks
Amazing Job.. Beautiful video !!
Thanks Juan.
Cool! My last rebuild was a 1954 Claud Butler Jubilee with later components. I cussed at the centre-pulls a few times.
adjust once.. Cuss twice. LOL Thanks for watching
Nice job, its a hi maintenance bicycle you have to love one enough to do all the hard work! Just remember to use 3 m fast tack and glue those tires down secure or you will wish you had!
LOL. Yes. Thanks
Eddy Merckx early in his career rode these bikes, Tom Simpson won Pari Nice on one similar in the 60s from PEUGEOT.
They had their day for sure. Mostly 60s and 70s!
Absolutely amazing video, job and a stunning bike!
It is amazing to see how much care and love you put in this bicycle.
Can agree with French products - they might be reliable, but are an absolute pain to work on. Used to own a Renault - and even changing a front headlight light bulb was no easy task 😅
I hope in distant future I will have space and spare time to do a similar project - absolutely love the aesthetics of this bikes. I'm kind of old fashioned, I know.
One last thing - you didn't mention why you changed the braking levers. The old ones had extensions all the way to the stem - a great convenience and safety feature. I know modern day brifters are slick and stylish, but God do I miss the times of design, prioritising convenience and function.
I can remember when brake blocks looked like that. 16mm?? I didn't know that anyone used a bolt with a 16mm head.
I agree that real men ride with blocks. Unfortunately, I can't anymore, but I still have a 13-18, 6 speed Winner freewheel, a 12-18, 7 speed Sachs freewheel, one of those special 12-21, 8 speed, Sachs freewheel (yes, freewheel), and a 12-21, 9 speed Shimano cassette.
Love the Binda Toe straps. (didn't know that they still made them) I would always race on double white Binda straps, when I raced on toe clips. I still have my old Duegi 101 shoes.
Great Bike.
I have a few sets of Binda straps around for builds. IDK if they still make them. YES 16mm. Only this bike though. every bike I have is 15mm some are 14mm
@@JohnsVintageRoadBikeGarage The old Shimano bottom brackets the used a nut were 14mm. Later, they were 15mm bolt type like Campy. I didn't have a 15mm thin wall, so I bought a Park 15mm peanut butter wrench. After getting Look pedals, I used the Binda straps to keep my pit wheels together.
Great ivideo! I had to laugh two times. I'm riding the PX10 1975 since 10 years at vintage rides and yes: 1. it's true, "the breaks suck" :-) And 2. I do understand why you can't wait to work on something that isn't french. But I still like the bike a lot :-)
It wasn't totally aweful. But after all the campy and Dura ace stuff U get spoiled!
Try the Mafac "Competition", which are an uprgrade of the "Racer" ones. They are tricky to set up but I find that with decent pads the braking power is really nice ! It's funny beacause here in France, french components are everywhere and quite cheap compared to Italian ones of high end japanese stuff (though Shimano and Suntour are always a better and cheaper alternative to Campa). So I can never fully understand the frustration of working with french threads and all abroad, cause here it's ubiquitous. Weird how losing a thread race to Japan meant our standards became quirky to italians, americans or english alike 😬
I really like the Spidel brands (Mafac+Maillard+Stronglight+Simplex) on late 70's french bikes.
And if you want to learn more about specific french brands and vintage bike related stuff, there are two really nice forums called "Tonton Velo" and "Velo Vintage à gogo" out there !
I need to build a garage like yours...
GO FOR IT!
Nice vid. One remedy for faded Delrin which nobody seems to have mentioned is simply to use a small brass brush - and an occasional wipe with mineral oil is said to help preserve the material. Oh, and don't overtighten any Delrin clamps, of course.
Looks great, belíssima
Thanks Michel
Aqui é Brasil uma obra prima, parabéns pelo seu trabalho!! Meu nome é Anderson Silva.
Hello! Thanks for watching!
I like the WD40 suggestion for the plastic components. Another option is there used (still?) to be a product that worked great on 1980s BMW black bumper inserts called “Back to Black”, it worked way better than Armor-All
Overall, nicely done!
Used Back to Black. Don’t recommend it. Its a surface treatment that doesn’t remove oxidation. There’s much better products out there in auto detailing land.
Getting tons of good suggestions. Thanks for watching.
As always a really enjoyable presentation with nothing missed out. Mistakes are just a way of us learning. Great job with the cloth bar tape. I just wish you would put the cables over the bars rather than under but hey we all like to do things our way. Keep the videos coming.
I've been running cables like that. I do that as a person preference. I should do it over the bar on this since I'm not going to ride this bike. It's to small. Thanks for watching.
❤Minh rất thích chiếc xe này , trông còn rất, rất đáng yêu !
Simplex CRITERIUM shift lever band is upedge down.
I worked at a shop from 1982-1985 and my fingers would be raw in the Spring from adjusting so many Dia-Compe center pull brakes during the Spring rush of purchases.
LOL. I worked in one from 82 to 89.. yeah plus other injurys like ripped nuckles. LOL Hey, I'm doing a video on the top ten Bike shop pranks. Can you think of any?
I'm surprised the bike came with Weinmann levers. Weinmann levers have a different pull ratio than Mafac levers and if I recall correctly as I had a similar combo on my Libertas in the mid-70's, they didn't pull enough cable leading to a loss of power. Try to get matching Mafac levers as they pull more cable while retaining modulation.. As to the grayed derailleur, try Armor All or those spray on tire sidewall treatments. The Clean Streak is what did your derailleur wrong. It reacts with the plastic. In the future, use dishwashing soap. And finally yes; you wrapped the cloth tape correctly. Tressostar and Tressoplast were the cloth tapes of the day!
Actually the bicycle had wienmanns with safty levers.. Im sure that is why they changed them. Back then casual riders would buy performance bikes then change the levers. I put period correct levers on them but not the right levers. Im having a hard time finding Mafacs that dont cost an arm and a leg. I commented on the way I taped because having a youtube channel you hear all the critics. LOL thanks for watching
Very nice old Peugeot nicely done. Those Delrin plastic derailleurs are just always going to fade in sunlight but car black trim wax makes them look better
Thanks!
Really Very Nice 😎 Congratulations on getting in shape. Also, I recently rapped my tape starting from the top and it is great. It looks better and feels good if I use the top position.
Cloth and plastic from the top. EVerything else from the bottom.. Thanks for watching.
That’s a lovely bike. I haven’t seen levers/brake handles like this since I was a kid.
Don’t miss the friction gear levers though! I do appreciate indexed changers.
The modern spec is much easier to use for sure. Thanks for watching.
I subscribed to your channel, really nice content and a lovely PX 10. Greetings from Germany!
Thanks for subscribing! Thanks for watching.
I used black shoe polish for my Simplex plastic parts and works great.
All you had to do to make the Delrin on the Simplex Criterium back to black was to spray it with WD-40, then give it a good wiping. And, the front derailleur is not correct. It should be the parallelogram Criterium model, not the pushrod model. And, the Weinmann brake levers? In the 70s I assembled more of those than I can remember.
You have a good eye.. I'll check on that front derailleur. This came from a neighbor and she said it was original. The bike had safty levers. I had to get rid of them. I only had weinmann on the shelf. Looking for an affordable pair of Mafac with decent hoods.. Hard to find!!!
Parabéns,,,a Peugeot e um ícone,,,,das bikes,,,,,, sucesso,,,, com os vídeos,,,,,,, Brazil,
Thank you!
Nice work John, the project turned out very nice,👍👍 as far as the rear derailleur, a coat of satin black spray paint will make it look like new, I did a similar one in a metallic silver that had turned white and now it looks like chrome again.
thanks!
The Stronglight 93 is a fave of mine, partly 'cause it looks so good when polished up! As for bar tape, wrapping cloth tape from top to bottom was the standard way back when. Was it just a few French folks that wrapped from the bottom up and then shellacked it?? Congrats on the weight loss!
Hey. I never saw cloth from the bottom up. Would be interesting to see the shellack job.. Thanks for watching..
@@JohnsVintageRoadBikeGarage It does get discussed on the bikeforums C&V group now and then. It's like putting a hard plastic coating on the tape. It preserves the tape, but changes the feel. Never tried it myself.
Like the ones the cannibal Eddy Merckx raced in the 70s and Tom Simpson won the Pari Nice on one similar.
The cloth and plastic bar tapes were wrapped from the top down. They were thin and you could wrap it tight enough so that the force of your hands would not unravel the tape. Beautiful build John.
Exactly! Thanks
Thank you for featuring the PX-10. I used to drool over it at the local bike shop.
I got a PA10 in ‘71. My friends thought I was nuts to get sew-ups, but they were the bomb! Eventually I sold them over.
I don’t think the Weinmann levers were original equipment. I’m pretty sure they were Mafac.
For black plastic restoration, there are automobile detail products designed for restoring black plastic and stripping off oxidation that might work. Stay away from crappy ones like Meguires. I used one by Car Guys that worked very well on my car. You definitely want one that is designed specifically to removed oxidation. But I can’t say how well it works on Delrin plastic.
Hi, Yes, the bike came with Mafacs. But the bike was converted with "safty levers" and I didn't have some Mafacs to put on it. So I went with what I had! I'll switch them out once I find some. Thanks for the advice on the blackening products.
Ficou muito linda nota10s
Yes. Peugeot had a great bike then!
Hey John, I dont know if it's available but, Rubber Seal Medallion Plastic Werks Plastic Shine rejuvenator MRS-7311-Q is the ticket. It is a permanent wipe on coating. How I use it on plastic auto parts on cars I'm restoring is to clean the part with mineral spirits and a toothbrush. Blow dry and apply with a clean lint free cloth. Has held up for years of outdoor exposure because it actually penetrates as well as providing a fresh dry surface that can't be wiped off by anything but a solvent based cleaner. Hope you can still get it. Most bodyshops deal with Rubber Seal Medallion products if you cant get it direct. Thanks for the great resto video.
Thanks for the tip!!
👏👏👏👏👏👏
Those plastic simplex derailleur often explode into bits a few of my club mates told me then they made all alloy
I've seen that happen when I worked in a shop. This is getting displayed so im not worrying about it getting damaged.
Hi I just finished watching the PX10 series restoration. Very impressive.
You mentioned that the frame is too small for you to ride. I you are interested, I have a 25 inch PX10 frame with the Nervex Professional fancy lugs instead of the plain lugs on your restoration. It also has gold Mafac brake levers and a Phil Wood bottom bracket plus some additional Peugeot parts. I built it up with a modern drivetrain and had my fun with it but it is time to let it go and want to part out the original Peugeot parts. Let me know how to contact you if you would like pictures to check it out and possibly make a deal.
I appreciate the offer, but if I was going to buy a PX10 again it would be a 23/ 58 cm frame
You forgot to grease the BB spindle square tapers! I know, that's a perennial argument. What's not arguable though, is you MUST grease where the stem goes in, for a bike that actually gets ridden. Unless you want to melt the alloy stem out someday, when galvanic corrosion has cold-welded it in. I'd grease the brake pivots too.
Pros tape the bars from the bottom up. Brake cables should pass behind the bars too.
That's not a corncob freewheel, it's what passed for a mountains freewheel back then! A corncob has one-tooth jumps all the way up.
yes I'm being way too picky, I can't help myself.
Didja notice the fake stitching on the shift levers? The molded plastic has fake needle holes and thread. Just a cute detail.
I love just about everything about those bikes, even the Mafac brakes and the dreaded delrin derailers. Thanks for making this one all purty-like again, and sharing the video evidence!!
Hi You are right and wrong.. I dont show everything I do on the quick build videos. I always say this is not a "how to" video. If you look at past builds you'll see the grease getting put on. I hear ya on the corn cob. But show anyone that is under 40 years old and if they dont see at least a 28T low gear they think its a corn cob!! LOL. Thanks for watching
Your bar tape installation is 100% on point. I, too, place the bar clamps - held with a bit of tape - on the bars, then wrap top-down. Leaving the clamps in place before taping results in the cleanest look ever once the levers are re-mounted. It's the only way to go! What brand of tape are you using here? It looks a bit thinner - and more manageable - than Newbaums.
I'll join the chorus suggesting Armor-All will likely "bring back the black" of the Delrin. Also, IMO the small bits of paint loss are no big deal. Patina, don't you know 😉
Nice job on the build; that is one pretty Pug in the end.
HI, because the tape is out of the package im not sure on the brand. Maybe Tressostar..something like that. Thanks for watching.
I did worse to my px 10. I removed the shifters and broke the band. The hard to find, expensive diamond shaped band. I was ready to jump off of a bridge. Luckily I found another. Now I won’t remove the band anymore on a resto that I’m not going to paint.
Interesting. I haven't had any problem removing shifters and cable guides. However most that I have done are either campy, Shimano or DiaCompe. Thanks for watching
Nice build John 👌, have you owned a vitus 979 Peugeot yet? With its flexi bonded joints. I own 2 and love the racing history of vitus. I look forward to your video's, thank for taking the time to share.
Hi, No I haven't. I do have my Alan guerciotti. close enough? LOL
Esse plástico preto do câmbio pode ser revitalizado com soprador térmico.
Wonderful! Can watch bike rebuilds for hours as long as it involves an old steel beauty 👍
Any bicycle tacing illuustrated magazines in your ‘shop’?
Hi. Thanks for watching. No. No mags here.
Its called 700c but that is for wired on rims. Sew ups are only slightly smaller than 700c. Hope Ive been of help.
I'm very familiar with that. However, I'm confused is to why you're explaining that to me?
Another great build, John. I saw how you had Richard Schwinn repaint the Campus Green Paramount for you. Ever repaint one yourself?
No. Honestly I don't have any desire to do so. I'll leave that to the experts! Have you?
You can use a torch to do the same thing your buffer wheel did, but you'll have more control over the process. That's how ABS plastic trim is refurbished.
Or a hot air gun, which is what I’ve used
Thanks!
Loved the video, thanks John! I am wondering why you didn't use that great chrome polish on the stem and handlebars?
The texture of the stem didn't show much inprovement after tryin polish. So I didnt show it! It helped the bars a little bit however. Thanks for watching.
mineral oil, soap and water is the way to start avoid chemicals or solvents
that would of worked better. LOL Thanks for watching
I’d use some Matt black paint and a small brush on the rear mech
Trying to avoid paint. If a coating doesnt work. I will go that route.
When Delrin greys out, it means it is drying out. I suspect the cleaner you used displaced whatever plasticizers that was still in the material.......which unfortunately means, it might start cracking on you at the Delrin pivots if you put any stress/use on the RD.
If you plan on riding the bike, you should just replace the RD with an NOS one. Those Delrin pivoted Simplex RDs shouldn't cost that much, compared to an all metal one.
Its on display.. It'l be safe! Thanks for watching
Armor-All plastic protectant will fix plastic that's grey and not happy! It soaks into the plastic and freshens it up ...
In the 70's nobody ran brake cables under the handlebars. They need to go over & behind to drop into tt clips & calipers.
I know I rub everyone wrong with how I run the cables. Its just a personal preference so when im riding they are more out of the way. Since this bike wont be ridden by me maybe I should move them behind. Thanks for watching.
Nice work. What seats do you have on the bikes in your workshop. Are plastic seats comfortable?
Wow. I have tons.. Everything you could imagine. Lots of Brooks, Selle Italia etc. Some plastic based seats are comfortable some are not.
@@JohnsVintageRoadBikeGarage have you tried the cinelli unicanitor seat? Any favourites?
the crankset looks different than the one on my px what kind is it and is it original -and i would love to see a detailed wheel lace up im wanting to do mine but afraid ill mess it up
thanks for any feedback and im gealous of your collection buddy
try a heatgun on the grey plastic, it works on trim on my car thats faded, lots of guides on youtube
Interesting. havent heard that one yet.