Five 3D-Printing Mistakes You're Making RIGHT NOW!!
Вставка
- Опубліковано 13 вер 2023
- Noob or ninja, all makers make mistakes.
Get the AnkerMake M5C for less than $400! ankermake.club/8110Aaqo
From the manufacturer:
The AnkerMake M5C is a precise, high-speed 3D printer that's easy to customize. You can start printing with just one click!
Available now for $399 in the U.S. £399 in the UK, 449€ in the EU and CA$699 in Canada.
#Ankermake #Ankermakem5c #3Dprinting
Get $30 off with the code M5CINF30A on M5C in US/UK/EU/UK,
Get CA$100 off with the code M5CINF30A on M5C in US/UK/EU/UK
Order on Amazon: ankermake.club/8110Aaqo
Order on Ankermake: ankermake.club/8110AmaS
Save your four fave filaments in the SUNLU FilaDryer S4! bit.ly/45RwnqA #SUNLU
Watch + record prints with the Mintion Beagle V2! Use code "ZackFreedman" for 15% off!
- Amazon (US): bitly.ws/Kgat
- Shopify: bitly.ws/Hkrm
Support my projects at / zackfreedman !
Ask your 3D printer questions on / discord
Featured tools:
AFA Tooling Deburring Tool w/ blade assortment amzn.to/3sUjEok
Wera Hex-Plus (w/ ball end) amzn.to/3PgiIC3
Wera Hex-Plus HF (w/ screw holder) amzn.to/3RjZ6Q8
Nozzle declogging tool (you print the handle) amzn.to/3LoxBkD
Plastic razor blades amzn.to/3PE1PCX
Wham Bam PEX plates whambam3d.com/collections/fle...
Featured models:
V8 Engine - 12oz Can Cup by MandicReally than.gs/m/925937?...
Firefly Malcolm Reynolds Pistol by Roy_M www.thingiverse.com/thing:392...
The Rowdy Flagon - Tankard by bendansie www.thingiverse.com/thing:583...
Wednesday Thing V2 Upsidedown by Hex3D was taken down
Fantastic Planter Spiral by Makers Mashup than.gs/m/914581?...
AnkerMake M5 Gridfinity by Kaze fhgj www.printables.com/model/555189
AnkerMake x Gridfinity - Shelf by SeeSharpist www.printables.com/model/4617...
I MODIFIED THIS! IT WON'T FIT THE M5C AS-IS!
Planetside Optics by Terminal_6 than.gs/m/54862?...
(It DOES fit properly - it was the BLASTER'S RAIL that was too small)
Credits:
Interference SFX by Partners in Rhyme
All other SFX from www.zapsplat.com
Stock footage from Storyblocks
I was paid to show certain features of the M5C, Filadryer, and Beagle, but I was not given talking points to read. Sponsors were not permitted to delete or modify my script. Opinions expressed in this video are NOT paid endorsements, they are my honest impressions. The sponsored products in this video just happened to be really good. - Наука та технологія
One thing that I love about Zack's vids is the fact he always manages to fit at least one sentence where 80% or more of the words happen to have the exact same sound pattern in them. This is just oddly satisfying to listen to.
His alliterative abilities are amazing!
@@boonemeat2652 Absolutely artful and astounding!
@@boonemeat2652amen
Seriously super satisfying!
it’s called assonance
Long time industrial maintenance tech tip: The hex heads with the little ball keepers are neat, but you can accomplish the same thing by placing a small piece of a plastic bag over the end of your normal Allen wrench. This makes for a nice tight fit so the bolt doesn't fall off the end before you reach the deep dark depths of whatever machine you're working on.
A single wrap of electrical tape also does the same
I have definitely NOT used torn pieces of shop rags to hold bolts onto sockets or hex wrenches. 😉
Vaseline or axle greese help too if grease isnt an issue. Just make sure to lick your tools clean before you put them back you animals. Who raised you?
Zach, you are an amazing script writer! Taking a simple concept and turning it into a DIV/0 error was a chuckle I really enjoyed.
Zack is the only maker to turn 3d printing into a life lesson
Point number 3 for me
agreed, I wouldnt mind listening to how he overcame and got to where he is now.
Right? 6:00 in, Zack reached through my screen and straight-up slapped some sense into my bike-shedding brain.
I don't have a 3D printer, but I love your videos
Yet...
Get one, you wont regret it
Same. No plans for one, just vague interest and deep love of Zach's alliterative antics.
Same. Also feel like I got random drive by unintended intervention.
For now the council will soon condume you too
Yes!!! Finally someone who tells people to use plastic razor blades as scrapers AND that you generally shouldn’t need a scraper at all.
I always love to use my machete to get my prints off seems to work the best for me
sadly it is too late LOL
@@A-wy5zmI'm not particularly well-versed in printing nor blades, but could a 3D printer reach the necessary thinness for a good blade or would you have to post-process it?
@@nerd_nato564I printed one that works pretty well when I need it
TAB TEARING TECHNICIAN HERE!!
Also, "Bikeshedding" - this was a new concept to me but I am WILDLY guilty of doing this... When the project gets boring, I find a different "more important" project to work on. I always convinced myself I was just a starter who lost interest in the ongoing operation, but you've really opened my eyes. Thank you Zack!! Sincerely.
I'm the same way, i also get too easily distr
I think the tendency to procrastinate is common in creative people. I know feel so much better when I finally complete important projects that I’ve procrastinated. Then, I wonder why I ever put them off in the first place.
I love tip #5! One of my favorite techniques is building overhangs that appear to be basically flat to the eye but actually aren't flat at all - and/or making curved injections rather than hard right angles. I believe I've become a better designer for 3d prints because I've seen all the fun ways that my prints can fail. 😅
I almost fell victim to mistake #2. Wanting to make a custom led project that was cheaper than the original was the goal. But with RND, failures, etc, the goal to be cheaper slowly is closing. And after a year of almost giving up I recently went at it again with a new mindset.
Lol feels
These tips won't make me a better printer. But it will help me to become a better maker... Besides, turning into a printer sounds painful. 😁
Consider that even if the project ends up being more than the product you were looking at, you gained valuable experience and can now make future projects that little bit more efficiently.
@@DanAnd190I think that works both ways. You can learn a lot from projects that go nowhere. And the best projects to learn from are the ones you started because you had an itch to scratch, not projects you came up with just to learn from. That itch is what prevents you from falling victim to #2, and motivates you to run the project to completion.
If you're able to pick it back up and continue/change it and continue then you'll be alright. Like others said, it's still valuable experience gained for the next project, but sometimes the idea hasn't fully cooked yet and coming back later from a new angle is all it takes to finish the project or at least make a big leap forward with it.
Dude those Wera Hex Plus wrenches actually are the business. I got that set recently for working on my mountain bikes, and they're seriously the nicest set I've ever used. So much better than whatever cheap hex keys I had lying around before!
I've got them for work (industrial maintenance tech). they are indeed the bees knees.
I first used them at work (machine maintenance) and I bought my own set like a week after.
Truly an amazing tool (and to be honest, hex screws are also the best, they're hex shaped after all) xP
@MCgranat999 get a pair of knipex cobra pliers. there honestly my go to tool. black iron pipe, rounded off hex or if an allen bolt is way messed up. you will surprised at the kind of bite those will get. do not, do not get the milwaukee 'version' I am a identifying milwaukee douche and those things freaking suck. gave them to another co worker. was excited about them for an hour and then tossed them in the metal dumpster.
Are they ball heads?
@@Seriniboy328Knipex just calls them a “Pliers Wrench” but if you haven’t seen them yet they are a smooth face adjustable wretch. Great tool
I can't stress enough how well Zack's video's are made. These video's would do great on a national network, or on the IEEE website. My sincere compliments, I'm a fan of the videos as well as the makers.
This. Video Form and Jokes in it were GREAT as always!
seriously, he's broadcast quality talent! Pay the man!
HE READ THEM ALL AND DIDN'T SKIP A BEAT! RESPECT.
Another suggestion for crisp fine text.
Add an height modifier juste before the text layer and change printing precision for the last few layers.
Even less post processing, no need for glue!
Wow, #2 hit close to home for me. I mainly do woodworking, and it is so easy to get down the rabbithole of making shop projects to improve my workspace instead of making actual projects. I have one that I have pushed off finishing for three years now.
BAG STABBING BARBARIAN HERE
i didn't even know they had tabs 😆
Never stop creating content! You're really talented at speaking and you make so many references. You could enter nearly and field or genre and it will still be entertaining / interesting.
Also, this is the only show that I actually like to watch the comments / credits for! Keep killing it!
I've never actually made a single 3D print yet, but learned a lot :D But as a programmer, I admit I never heard of bike shedding, but definitely done that quite a few times :D
Bike shedding is when a bike moults its frame. It’s how they grow in the wild
@@yourt00bz👁️👄👁️
Honestly, when i first got into the hobby, i was sitting there scrolling printables looking for Dwane the benchy johnsons and other shit worried that i might not use the printer enough to make it worth it.
Then i learned Creo with an EDU licence, then Onshape.
Now i need to restrain myself from modeling and printing just for the hell of it
Thank you for this. I've plateaued in my journey, and I think these suggestions will really help give me some positive yΔ. Oh, before I forget, I am a bag stabber, unless it's one of those resealable bags. Then I delicately trim off the sealing plastic before ripping open the ziplock, invariably pulling half of it off one side of the bag...
I really want to stress that deburring tools are still VERY DANGEROUS because they are VERY SHARP and are made mostly for debuting parts made from aluminums to hardened steels. Still works absolutely amazingly for cleaning up prints, just always make sure to follow proper knife safety rules you should be alright. Other than that, amazing video!
Called out! I've made and moved past most of these mistakes (deburring tools are magic), but I am indeed bike-shedding a big project that intimidates me. I'm now filled with resolve (and cheese) and inspired to dive into it this weekend.
Just a heads up, there's a "New frames need analyzing" message on the screen at around the 35 second mark. I love your vids!
came for 3D printing content, got surprised by plural acknowledgement that just treats it as normal (positive)
You not only make amazing tutorials, you make them very easy and fun to watch. Thank you so much.
This video is incredibly to the point, useful, and has a touch of good insight and mindset. Not a wasted minute, and more than one pleasant guffaw.
Zack, you're too kind. Pretty sure I'm making at least 50 mistakes :-)
But watching this video ain't one!
I got into 3D printing when I discovered hextraction. I don't own a printer myself, so it's slow going (using the library and more recently the printer I found at my new workplace), but I finally finished a full beginner set of tiles and a board. I just need to glue it together.
My next project is a board of quoridor. I'm taking the extra step of designing all the models myself, which is fun. OpenSCAD is not the best language, though. Maybe I should have used of the python wrappers or something instead. At any rate, it's coming along nicely. I have the board, the walls and a box more or less finished. I only need to tweak the box a little and design the pawns. And perhaps, if I'm feeling ambitious, dedicated spaces for all the pieces inside the box. Or I'll just let everything rattle around freely in there.
I abandon my prints all the time, though (but I always keep watch the first few layers). And my game board and box have sharp 90° corners, and the walls are tall and narrow. Sorry, people.
This makes me pretty happy. I had a long list of prints and parts to make for and upgrade my printer. But I have been too busy completing projects to get to more than two prints on that list. I have made so much cool stuff for my apartment that I am always working on and completing a couple projects at a time. It is so satisfying!
I think you're the most ADHD friendly UA-camr I've ever seen. Your videos are some of the only ones I can watch without getting distracted at some point, because you never waste a second off audio or screen time (except the credits, I hope you don't mind that I usually skip those).
And these are excellent tips, I think I needed to hear the one about moist filament that most. I'll have to evaluate some of my hoarding tendencies.
Wow, I never realized that but that's totally accurate.
Yeah! I second that. First video I had to slow down, because it is too dense and the language is not easy straight forward but so wordy. I do like it as it is a great change and makes them unique.
I would lile to heartedly agree with this. The loud, crisp audio with no breaks at all is just perfect for my perpetually distracted brain.
Yeah, it's very stressful for me. I feel for you. You're missing out on some real gems from Jack Hargreaves.
brother u should dopamine detox
Very good advice! The filament dryer is really useful, I use SUNLU S2 to solve the moist problem. The first layer problem accurs alot, thanks to zack!
Same for me
Please make more videos like this one. Very enjoyable to warch, and very useful.
Thank you so much for including us plurals towards the beginning!!
i didn't know i could make mistakes with something i never did
great
Protip: I have saved several doomed prints where a corner begins to pop up with a $10 3d pen. Pause the print, push the base down and squirt some filament around it. Works very well as long as you aren't super particular about the finish in that area.
5:45-9:00 was real as hell and honestly a good wake up call and applicable to any projects or endeavors beyond the scope of 3D printing. I need to finish up a good 3 projects before I should even start fiddling with the new 3D printer I have on the way. Thank you, I needed to hear it
Great advice. Especially creating your own files. Even using something as simple as tinkercad to make something you need is a huge advantage over just downloading everything from someone else.
Surprisingly reasonable advice! Definitely guilty of a few of these. In my experience the metal bed removal tool won't damage a glass bed, and I used one for years with no noticeable damage, but it does become a problem for basically any other print surface. I have filament as old as 2017 that's been stored in well maintained dryboxes and still prints fine, but yeah prolonged exposure to moisture and you're on a highway to degradation town.
Yeah, that checks out - If you have no moisture getting in, the degratory reactions wouldn't be happening. That takes good discipline and practices with a good drybox setup, of course, not to mention a filament dryer to match in most cases. So the advice to "use it or lose it" is overall pretty fitting for most people.
@@Woodledude Printing Nylon early on forced me build this discipline quickly. 5 gallon buckets with rubber gasket sealed lids and an esp32 for each that alerts me when humidity goes over 15% so I can dry the desiccant. Also started using activated alumina a while back and it keeps humidity very low. All my hygroscopic filaments print from another dry box. But yeah, doubt most people go to these lengths.
As a board game designer, I can attest that designing pieces for 3D printing from the word go has made my life INFINITELY easier. I also use a very narrow range of filament that prints well, and that I can get from just one source - So I only ever have like 10 spools open, and I'm chewing through them at a steady pace.
I'd say this in addition - If you hsve access to a multicolor printer, or even a printer that you can trick into doing adhoc multicolor, you can get a LOT of aesthetic excellence out of a very small total pallette of colors.
Thank You Zack! Always good to have a reminder
This video came across in a surprisingly personal way, and at a good time. I really appreciated the emphasis around not procrastinating, or 'Bike-Shedding'. I have only seen a few of your videos before this, as I don't watch a lot of UA-cam, but I will definitely change that so I can continue to watch your uploads. I find your videos very entertaining and informative, so, thank you!
Wasn't expecting plural support, but honestly not surprised! Love it! My partner was also quite excited seeing a non-system focused channel say it (not assuming not plural, just that it's not the focus of the channel). Thank you, you beautiful cyborg ❤
Yeah, it really caught my ear, too! We're a system, too, and two of us work together on our 3D-printing projects. I do the printer-related stuff and an alter is the software guy (working in SolidPython 2).
The bike shedding problem is exactly why I recommend people not buy project printers, because I know people 99% of the time don't want to actually tinker even if they say that. What they really mean is they want to put a silly hat on it and that's it.
Just get a P1S, X1C or MK4s, and then actually do things.
Just wanted to say that I was impressed how well you summed up the bike shed problem. Kudos!
Thank you for this video. You made me realize a few things I didn’t know before. or maybe I did and I was just procrastinating. Good work! Love your videos.
(3:50) Wera even offers a Hex-Plus Set wigich includes the tiny ball for the HoldingFunction in the rounded end!
I faced all those issues with my creality printers, I got fed up constantly adjusting the bed and other parameters. I sold them and got an Ankermake M5, out of the 30 some prints I have done so far, never needed to intervene at all, the auto leveling does its job, and it does so much homing and leveling before each print that all of them come out perfectly.
I didn't feel right hocking up that much money for this printer, but damn is it nice not to deal with all the tedious adjustments I used to have to do just to have the print fail half way through.
Your’s is quickly becoming my favorite channel. The knowledge, experience you share is next level and conveyed in a fun and watchable way. The alliteration and rhyme schemes set an upbeat tempo that make time fly and the driest topics ultra moist.
3 more tools:
1. Thread Chaser(similar to a tap but won’t cut new thread)
2. Small Torque Wrench (1/4” drive, in.lbs)
3. Impact driver( a must have to extract stripped or hogged out fastener heads. Inexpensive and you get to hit it with a hammer)
The rant oddly helped me get back to working on my zine project, thanks.
I am quite a big fan of printing on tempered glass. I have printed on it for close to 2 years now on 3 printers and love it. it holds tight on every filament type i have used (PLA, PETG, Nylon, ABS) and once you wait for it to cool down often times the part just pops right off without any effort. Its tricky to get it to print initially but with mesh bed level and some patience you too can have glossy shiny first layer prints lol
DO NOT PRINT PETG DIRECTLY ONTO GLASS it will chemically fuse and rip chunks out of your bed, use glue stick or hairspray as a buffer.
I just use some random piece of glass i found. a larger print i made in black pla had a near-perfect mirror finish, but only for a few weeks
You able to print PETG without bed adhesive though?
I loved my glass panes, and I can't lie, pei is not as flat. But my bed also weighs 40% less, with a pei sheet.
The bike shedding tip is something I really need to internalize more with all of ny hobbies (；^ω^）
Ive just finally got my printer mostly functional, and now im in this weird decision making paralysis of what to do next. I have saves files across multiple websites, and yet i feel like i have to wait before even doing any of those. I keep feeling like i need to learn everything first. I know that i dont, but the 88 bees in my head convince me otherwise 🙃
I know this video is about 3d printing, but the part about biteshedding, and getting into a finish-it mindset.. it motivated me to finish something that I've been sitting on for weeks. thank you for making this video! Also I love the 3d printing tips!
The writing and delivery here is a work of art. Instant subscriber!
I don't use it often enough, but Adam Savage has a great rule for avoiding mistake 1: Any time you buy a new tool, you should always start with the cheapest one you can find. If you use it enough to break it, you're allowed to get a nicer/more expensive one.
There is a major flaw with that. If the cheap tool doesn’t do as good or fast a job then that is a valid reason to replace it. Like Zach showed in the video, cheap hex keys can mess up bolts and you could keep going until it breaks or you could save yourself a lot of time and stop damaging bolts and just buy a decent set.
It is a good rule for some tools and some situations but for most it isn’t that great.
@@conorstewart2214 This is true, but it's a good starting-point for just about any tool. I think the example Adam Savage used was getting a cheap power-drill for a single project.
I also mentioned that I'm not the best about following it, and this is the main reason why. But I still find it useful to keep in mind when shopping for tools.
@@HumanShield117 I also think it is a strange rule to come from Adam Savage when he seems to just spend money almost impulsively.
@@conorstewart2214 It's his attempt at curbing some of that spending.
Because spending...(I don't know what they cost) ~$60 on a drill, and only ever using for that one project is a huge savings, especially when it's so easy to feel like you need all the fancy features of the $200 drill...when in truth, only someone that uses it for several hours a day actually needs those...
But it's so easy to tell yourself that you'd actually use it, and just get the better one to start with, and fighting that gave me the same vibes as the "spending spree" that Zack mentions.
@@HumanShield117 yeah that is true, it is easy to tell yourself it will be useful in the future.
Something original
Hands down the best I've ever seen. Fantastic job.
The alliteration at 7:13 is stupendous.
Definitely a tab tearer. love the videos Zach thank you.
Great video as always, seems like an easy topic but anyone who has done a video knows how much effort goes into not only this video but every one.
Thank you! I’ve been so concerned about getting my Vox lab Aquila performing at top notch. I have lost focus of my purpose in getting into 3-D printing, which was to finish my prototypes. thank you for this information. I needed to hear that I’m going to stop focusing so much on the printer and go back to focusing on the projects.
I needed to hear this, especially about bike shedding
Astoundingly awesome alliteration, as always 👏
Been waiting for something like this to finally get into 3D printing
The alliteration is off the charts on this one. Love it.
Holy moly. I had never heard the term "bike shedding" before, and I've been doing this for ages. I got called out in the best way. Thank you :)
First time viewer. I immediately subscribed, because you keep it so straight, real and entertaining. The fact that you tell the viewers to stop f ing around and get to work. Love it
I had no idea that the nozzle clearing tools I have were acupuncture needles; you learn something every day.
This was moist educational. Thanks for these tips and warnings.
I know it is probably not intended, but the premiere transition placeholder on the video clip of the beginning is so on brand and I love it
Came back here because youtube and I forgot I already watched this. AND it is actually the video that got me to buy a deburring tool and I am SO GLAD I DID. LOVE IT.
I do the acupuncture needle in conjunction with a cold pull. works like a charm
Hell, I felt that last tip in my soul. I too primarily use PETG for functional prints, and the most I've ever done is just try to reduce bridges. Thanks for the tip!
Videos like this one are some of my favorites on UA-cam. Thanks for Gridfinity!
As always, brilliant, insightful and rudely funny. Best UA-camr ever. Never stop.
This was oddly motivating. Thanks!
I truly enjoy your sense of humor sir! don't chance a thing!
I fillet/chamfer my corners for aesthetics never knew that fixed my prints
Thanks!!!!!
The filament dryer is really useful! I need sunlu S4 now!😮
Your killing it bro! 👍🔥
Great Video, So many people complain about printing and there printer failing when in fact its one of these problems they have caused themselfs.
First video I've seen by you, invaluable information, you really explain stuff well and make valid points.
That m5c is cool, I've been really into Bambu Labs p1s lately but don't own one yet. All I have is a Biqu B1 SE Plus.
Unexpected master essay on procrastination and good advice against it. 👍
A lot said is also applicable to software projects, for which there are infinite juicy tooling rabbit holes one can spin wheels in and never ship a product.
I've been a champion bike-shedder for decades and had no idea what the term for that was. Great video! I have made and completed lots of projects, but most of them aren't the projects that should take priority. I do mindless crap that is absolutely unimportant to put off doing the important stuff that also happens to be out of my comfort zone or a pain in the rear.
You crack me up Zack. Thanks for the content.
Thanks for the tool suggestions, they've been working for me. For excessive bed adhesion problems part of the issue is that I have Z calibration set a little low because I like erring on the side of not having prints fail but also I compensate manually by putting down plates which are more than one layer thick for support materials to go on. Those come off easily and it irritates me no end that it isn't available as a feature in slicers.
The MOST entertaining video I have seen. and informative :)
absolute Champion
Started 3d printing because of this channel. Now I'm learning arduino because of this channel. Thx so much Zack! It's been a blast!
The moist filament bit is so true! I was going mad trying to fix terrible print quality and then I bought new filament and my print quality was perfect again
the MIP / THORP precision ground allen screw drivers for RC use are also AWESOME if you want quality hex tools. they only come in smaller sizes though
never seen a 3d print video this helpful before
This is such great advice. Thank you for sharing. love ur videos
Your educated but carefree delivery is awesome!
Loved the discussion of bike-shedding.
had bed adhesion issues, installed pronterface and used a visualiser (copy paste data from pronterface to visualiser web page) to show bed, it was not pretty, some coper tape used in lead lighting and some patience, slowly raising low areas with a strip of tape applied to heating plate, run bed mesh, rinse and repeat until it got as close as I can. cast improvement.
no more adhesion problems. win.
Thank you for correcting the Moist problem. a LOT of youtubers spread the bad info that "PLA doesnt need to be stored dry". and they all are extremely wrong. You sir are the king of all by reminding us that you gotta keep the filaments dry.
The reference to systems was surprising! Thank you hehe
Damn son, I just started 3d printing yesterday, and I thought I was going crazy, because I had at least a few of the thoughts that you just explained, and thankfully I'm not crazy. Thanks. Good to hear a professional with some sound logic.
Thank you for creating content on youtube! You are awesome! :D
honestly i never thought i would fine some solid life advice from a random youtube video about how to fix my damn printer again. this was some powerful stuff about procrastination. seriously great job dude.
I have had the plastic blob form, usually because I dozed off and didn't check it. I have had to rebuild my hotends twice because of that. I thank you for the advice about filaments, I have a couple of rolls that did print quite well, now I've had the filament break off during printing. I don't have too many at once (cough 22 cough) but each one was bought for a specific project and is leftovers. I've started printing with nylon... (soft thudding caused by my head and a wall) and have had some success, it was my first for $ work. I have a soval v6 and it was working well, until I went outside to mow the lawn and that was my second blob attack...
Thanks for the tips Locutus!
Thank you. I appreciate the information.