Great video, i was wondering if you have any benchmark between these two GPUs for 1440p gaming? Would like to know which has the upper hand? I have the Asus TUF OC 3080, this exact card.
Just replaced my paste on my TUF 3080, it was shockingly thin, almost non-existent across the chip and all clogged on the edges. My fans were roaring to 100% periodically because my GPU core reached 71c and my hot spot reached 102c(!) under load, idle my GPU was around 46c. Re-pasting saw my core drop to 62c under load and hot spot dropped to 73c, fans stopped roaring away randomly at 100% speed, and my idle dropped to 35c.
The manufacturer does not specify when to replace the graphic card thermal paste/pad. In a good use environment, well-managed graphics cards may not require thermal pad/paste replacement or cleaning. In my case, I felt something wrong with VGA's cooling performance and maintained it myself. (It was judged by looking at the temperature higher than expected and the RPM of the cooling fan.)
저도 채굴 3080 tuf 구매했었는데 고주파 같은 소리가 계속 나서 달래묘님이랑 같은 작업해줬더니 그 소리의 원인은 팬이였습니다... 알리에서 팬 교체후 온도도 잘 잡혀서 잘 쓰고있지만 한번에 방열판 부식, 팬불량 없이 뽑으신 달래묘님 부럽습니다... 영상 잘봤습니다~!
Точная толщина не имеет смысла, поскольку толщина, применимая к каждой твердости термопрокладки, различна. Если вам удалось снизить температуру, вы можете использовать его как есть.
I feel at peace watching your vids.
Better than new! Happy New Year! 🥳
Thanks a lot, very helpful video!
달래묘님이 작업하신 tuf 탐나네요. 맘 같아선 구매하고 싶네요 ㅋㅋ
그리고 오늘 평소 브금이랑 패드 자르는 모습이랑 어우러져서 스테이크 써시는거 같네요 ㅋㅋ
Great video, i was wondering if you have any benchmark between these two GPUs for 1440p gaming? Would like to know which has the upper hand? I have the Asus TUF OC 3080, this exact card.
Thank you for very good video very helpful
Just replaced my paste on my TUF 3080, it was shockingly thin, almost non-existent across the chip and all clogged on the edges. My fans were roaring to 100% periodically because my GPU core reached 71c and my hot spot reached 102c(!) under load, idle my GPU was around 46c. Re-pasting saw my core drop to 62c under load and hot spot dropped to 73c, fans stopped roaring away randomly at 100% speed, and my idle dropped to 35c.
Good morning and happy new yr! Question - how do we know when to change the thermal paste/pad or when should we do cleanup?
The manufacturer does not specify when to replace the graphic card thermal paste/pad.
In a good use environment, well-managed graphics cards may not require thermal pad/paste replacement or cleaning.
In my case, I felt something wrong with VGA's cooling performance and maintained it myself.
(It was judged by looking at the temperature higher than expected and the RPM of the cooling fan.)
@@DalraeMyo Thanks for the tip! Will monitor the temperature and fan speed😊
@@DalraeMyo How many packs did you end up with? How many 2mm and how many 3mm? And what was the size? Thank you!😊
@@JalilovTimur not sure if you still wanna do it, but i got 1 1mm 1 2mm and 1 3mm pad 90x45 for my 3080 tuf gaming 10GB
저도 채굴 3080 tuf 구매했었는데 고주파 같은 소리가 계속 나서 달래묘님이랑 같은 작업해줬더니 그 소리의 원인은 팬이였습니다... 알리에서 팬 교체후 온도도 잘 잡혀서 잘 쓰고있지만 한번에 방열판 부식, 팬불량 없이 뽑으신 달래묘님 부럽습니다... 영상 잘봤습니다~!
저는 다행히 소모품만 상태가 안좋았는데 쿨링팬이나 PCB기판쪽에 데미지가 있었다면 끔찍할뻔했네요...
nice one bro
Can you teste Intel 13500 and 13700 with msi loadline calibration ?
I don't have any plans to purchase the non-K version of CPU yet, but if I do, I will test it!
저도 채굴살까하는데.... 어디서 구하셨나요??? 갤럼특가...?
그냥 뽑기해본단 심정으로 네이버검색 오픈마켓에서 파는거 구매해봤습니다.
Great video!
What is the thickness of the thermal pads on the memory, vrm and backplate?
The subtitles say it.
Там должны быть прокладки 0.5мм, 2мм и 3мм, а вы использовали только 2мм.
Точная толщина не имеет смысла, поскольку толщина, применимая к каждой твердости термопрокладки, различна.
Если вам удалось снизить температуру, вы можете использовать его как есть.
i would not trust that card at all, it has clear tiremarks on it, some truck has run over it