I installed all of the wiring,temp gauge,and VOLTMETER,plus the dash and turn sig. indicator bulbs,before installing cluster into the dash. I used an A.A.W. kit,for the '55-'59 Chevy trucks. I went with a 4-way flasher,and after-market turn signal. Techs are extremely informed,and very helpful. You pay a little more for their harness,but I'm extremely satisfied! Nice job!!
This truck project is awesome! Watched the entire series from the beginning and knew I needed to subscribe after about two segments. Great videos. Perfect amount of detail without being boring. Fantastic for those of us that are learning. Can't wait to see you get this thing on the road.
these videos charged me up !!!! went out last night and came home with a 65 c10 step side, winter project going to set the body on a 70ish 3/4 ton 4x4 frame,,, I CAN DO THIS !!! thank you for taking the time sharing your work !!! Lov it....
Hello, Sir . Question how were you able to use original steering wheel with I-didit column? I didn't think the original would fit onto those? What exactly did you have to do if you don't mind me asking?
When I ordered the Ididit column I ask for the 1963 Chevy c-10 column they told me it would work with my original steering wheel, I did have to shave a little plastic down from the center horn
Thanks man This instrument panel actually came in these truck one of the two I guess it was an option to have the tack and vac on each side take it easy
Coming along nicely! My 64 chevrolet had the tach on one side and a clock I believe on the other side. when ever I would come across the vacuum gauge cluster it was usually in a grain truck. Kinda nice having the full Monty on the gauges!
Yes I really like the set up been looking for one for a while some also came with the air gauge also I'll find a line on the back of the carb for the vac line
That's just coming out awesome, I have guys doing the body restore on mine but then I'll be doing the interior and installation of engine components and getting it running,
My old mama would tell ya that for a nickle more you could've got a red truck. I tell ya though, it's looking good. Tilt wheel and all man, you'll have name it cowboy cadillac. I like the white top, seen it before and that,s nice. I can't believe how intense you are but with the money and your putting out it will be well worth it. Great job man.
Hey man! I love your videos on your 63 Chevy truck! It is awesome how you include every step you are taking to get the truck built back up! As I was watching your videos I thought hey our vids are really similar and I believe our love for old classic cars is to! I was wondering if you would be willing to do some sort of collaboration between our two channels, that way my subscribers an find you and yours can find mine! Let me know if you would want to talk a little more in depth about it. Thanks! Ben
What kind of paint is that? Does it come in a chrome color? I need a mid 1950's steering wheel (Buick or Chevy or something similar) for a show I'm doing unfortunately most of the restored wheels are way out of my budget. I thought I'd try to restore one myself. Any suggestions? Very grateful for any advice.
Gibson63 thank you. Great work by the way. Wish I could afford one of those mid 1950's beauties. A Chevy convertible ... baby blue with big fat white wall tires. Yes...thatwas would make my day.
Really like the restored instrument cluster. Can you give me a name, number, website, or email where you got it? Have watched all your videos. The truck looks great.
Very very nice work. Looks fantastic!!! As mentioned below, shows great attention to detail. I would be EXTREMELY proud. I guess it's OK to ask since everyone always asks me; do you have a "target" end date??? I'm curious to see how your answer compares with mine. ;o)
Don't realy have a time date at all, I frame houses for a living and sometimes I get realy tied up but get slow in the winter I'm just going with the flow hopefully by the end of spring I'll have the bed on
gibson63 Cool!! I'm a retired electrician who has wired many houses in the past. Finished my electrical career in a pharma. environment. Very satisfying. I usually answer that question (end date) by saying " don't know and it stops being "fun" if you rush".
I'm on my own c10 rebuild. Enjoy watching the speed in which you work.
I installed all of the wiring,temp gauge,and VOLTMETER,plus the dash and turn sig. indicator bulbs,before installing cluster into the dash. I used an A.A.W. kit,for the '55-'59 Chevy trucks. I went with a 4-way flasher,and after-market turn signal. Techs are extremely informed,and very helpful. You pay a little more for their harness,but I'm extremely satisfied! Nice job!!
Bill Hickey if
Great! Nice work!
I really like your style. Very stock looking but extremely nice and tasteful modifications. Very nice.
Thanks man hope to find a radio soon that will complete my dash
I've been halfway looking for one too.
Custom Auto sound will fix up with a stock looking radio with modern innards.
That is a gauge cluster is out of a Viking or Sparton cab and chassis.
Great job!!! Your truck is lookin' awesome!
Looking real nice .. those old steering wheels are real classic
Do have the contact info for the cluster guy!
Love the new instrument cluster!!
This truck project is awesome! Watched the entire series from the beginning and knew I needed to subscribe after about two segments. Great videos. Perfect amount of detail without being boring. Fantastic for those of us that are learning. Can't wait to see you get this thing on the road.
Very nice workmanship
I'm so glad I found your channel!! Thanks for the new video!
Great looking organized shop! I took a picture and I’m gonna copy your set up, thanks!
Excellent! I have this same steering wheel, I'm wanting to restore for my 66, thanks!!!! Did you use bondo or epoxy to fill the cracks please sir?
It was some sort of epoxy, but not Bondo
these videos charged me up !!!! went out last night and came home with a 65 c10 step side, winter project going to set the body on a 70ish 3/4 ton 4x4 frame,,, I CAN DO THIS !!! thank you for taking the time sharing your work !!! Lov it....
mark sitton cool deal man thanks for watching
Love that cluster!!!
I like that you take your time and think things through.I can tell you have a vision of what you want.love your direction keep up the great work.
You got the eye for details, most important when doing something like this.
Very nice cluster and steering wheel. !
Thanks man
You’re a one-man show very much appreciated
anyone know where id be able to get a tach and vacc gauges for a cluster like that?
Hello, Sir . Question how were you able to use original steering wheel with I-didit column? I didn't think the original would fit onto those? What exactly did you have to do if you don't mind me asking?
When I ordered the Ididit column I ask for the 1963 Chevy c-10 column they told me it would work with my original steering wheel, I did have to shave a little plastic down from the center horn
Lots of work on that wheel...The cluster looks way cool..Good work buddy
What did u use to buff out steering wheel ?
Keep beating on it, coming along nicely
Nice work, lookin great!
Sure is looking classy. I like the dash panel modifications that upgraded it all, while still looking like it belongs in there.
Thanks man This instrument panel actually came in these truck one of the two I guess it was an option to have the tack and vac on each side take it easy
This is turning into one classy truck, nice work.
Yep more dollars than zence
i like the care u took...with the truck id tag in the door jam...nice & clean PEEEACE
Coming along nicely! My 64 chevrolet had the tach on one side and a clock I believe on the other side. when ever I would come across the vacuum gauge cluster it was usually in a grain truck. Kinda nice having the full Monty on the gauges!
Yes I really like the set up been looking for one for a while some also came with the air gauge also I'll find a line on the back of the carb for the vac line
gibson63 I drove my 64 to highschool in the 80's and I loved that truck and am really enjoying your build! Terry
very nice truck is looking great
That's just coming out awesome, I have guys doing the body restore on mine but then I'll be doing the interior and installation of engine components and getting it running,
What steering column brand did you go with to retain the original steering wheel?
where did you get that fan shroud?
Classic parts
That first scratch is gonna be a killer!
Very nice looking IP. I like it.
Beautiful !
Liking it bud...Looks sweet. Like Dean said...I'd be afraid to drive it to. lol
Haven't watched your channel in a while, trying to get caught up. Truck looks great man.
What did u use to fill the cracks on the wheel with
2 part epoxy works great
Wow love the gauges and steering wheel. I am working on a 1964 and hope I mine comes out this nice.
Always love the deluxe wheel
My old mama would tell ya that for a nickle more you could've got a red truck. I tell ya though, it's looking good. Tilt wheel and all man, you'll have name it cowboy cadillac. I like the white top, seen it before and that,s nice. I can't believe how intense you are but with the money and your putting out it will be well worth it. Great job man.
Man U be going full throttle 👍🤘I see u great job dude
Never seen a dash with the Vac Gauge...Nice work!
Junior D Outta of a Viking or Sparton 2 ton or heavier tractor.
Damn! That's the same steering wheel I had my my '60 Chevy Bel Air years ago
truck is looking great , looking for a '65 SWB for my wife and I can only hope it turns out this nice when we are done .
Hey man!
I love your videos on your 63 Chevy truck! It is awesome how you include every step you are taking to get the truck built back up!
As I was watching your videos I thought hey our vids are really similar and I believe our love for old classic cars is to! I was wondering if you would be willing to do some sort of collaboration between our two channels, that way my subscribers an find you and yours can find mine! Let me know if you would want to talk a little more in depth about it.
Thanks!
Ben
looking good
Looks good bro
Nice job.
You should try the Dakota digital retro guages for your truck but beautiful truck man
What's the wheel out of?
Jesse Pantelakis this is the original wheel for the custom Chevy C-10s
@@Gibson63. that wheel is so sick
that truck is so nice, id be afraid to drive it
Thanks man can't wait to get it on the road
Looks Nice!
Did you paint that column or is the reflection of all the red what makes it look painted at the end? Looks good my man!
Yes I painted the column red Thanks
What did you use to fill the cracks? Base,clear paint? Thanks
any ideas where I could find a horn ring like yours..?..any suggestions will be greatly appreciated
Hey dude. My name is John and I'm from Australia. I used to have a 1960 Chevy Bel Air and the steering wheel and horn ring was identical. Cheers.
John Nijam ..thanks. .I'm going to start my search...it's weird how they put that on my 63..nice touch tho
Hi, I have been viewing your channel. I am restoring a 1966 C10. I was wondering what company you used to have your instrument cluster refurbished.
Where did you get that instrument cluster from? Please share. Thank you. Great looking truck!!
www.redlineg.com guy does great work out of humboldt,TN
What type of filler did you use on the steering wheel? Enjoy the videos. Keep up the good work!
I used the short strand fiberglass filler by Dynatron
Very sharp truck; how much money you think you have in it so far?
Haven't been keeping up with it, Maybe I'll sit down one day and add some stuff up little scared right now Thanks take it easy
What kind of paint is that? Does it come in a chrome color? I need a mid 1950's steering wheel (Buick or Chevy or something similar) for a show I'm doing unfortunately most of the restored wheels are way out of my budget. I thought I'd try to restore one myself. Any suggestions? Very grateful for any advice.
Vanessa Shaw Glasurit paint basecoat clearcoat victory red is the color don’t know if it comes in chrome or not
Gibson63 thank you. Great work by the way. Wish I could afford one of those mid 1950's beauties. A Chevy convertible ... baby blue with big fat white wall tires. Yes...thatwas would make my day.
Just found your video channel wondering what you used for disc brakes on the front of the 63 thanks John
I went with Early classic 63-70 front disc brake conversion kit [Raybestos] 2.5 drop spindles
Thanks a lot do you have a link to them where you got them? I'm in Canada so there is not too many suppliers for stuff like that pay through the nose!
That dash you're putting in is badass big$$$?
Earlyclassic.com is the web site where I ordered all my suspension parts there out of Fresno California
Ty
Really like the restored instrument cluster. Can you give me a name, number, website, or email where you got it? Have watched all your videos. The truck looks great.
Very very nice work. Looks fantastic!!! As mentioned below, shows great attention to detail. I would be EXTREMELY proud.
I guess it's OK to ask since everyone always asks me; do you have a "target" end date??? I'm curious to see how your answer compares with mine. ;o)
Don't realy have a time date at all, I frame houses for a living and sometimes I get realy tied up but get slow in the winter I'm just going with the flow hopefully by the end of spring I'll have the bed on
gibson63 Cool!! I'm a retired electrician who has wired many houses in the past. Finished my electrical career in a pharma. environment. Very satisfying.
I usually answer that question (end date) by saying " don't know and it stops being "fun" if you rush".
@6:00 what is that metal tag in the door jamb cab riser / pillar?
Vin number# or vin tag
+gibson63
Nice, I've been hooked on this build since I stumbled onto it yesterday. Slow days at work. : )
How long did this entire project take you?
Regina Pilotte About 5 years off and on
Where did you get the gauges?
Redlineg.com out of humboldt TN right up the rd from me, this guy does great work on classic gauges and clocks
Did you star on the 57 yet
Jose Menchaca Don’t own a 57 but my brother has a 59 Chevy truck that I my do some work on thanks for watching
Maby a little meth
Yes Sir !!!
U look like James
everything red is to mutch