I was changing my oil yesterday and I asked myself that there must be some method in refining the used motor oil. Here I am looking at your amazing video. This is great in what you are doing. If I were to see refined oil on my nearby store shelves that meet the same certs as virgin oil I will buy it. Thank you for posting this video.
Since 1859 we've been boiling crude oil (at very low temperatures due to the very low flash points involved) for 15 to thirty minutes to distill gas, kerosene (diesel & jet fuel), bunkers 1, 2, 3 and sludge (mixed with crushed rock to make asphalt). Not to mention the vapors (acetylene, propylene, butylene, etc..) not rocket science.
Is it Acetic acid that is added added to the oil. Used oil already is acid, should this not be neutralized with a base compound? I want to clarify some dirty hydraulic oil so I can reuse it.
El ácido es para reaccionar y destruir los aditivos detergentes y dipersantes ,y el polvo y el ollin , ácido sulfúrico es lo ideal después se tiene que neutralizar con tierras diatomeas para que quede en un pH adecuado.
The refined oil doesn't look clean, the red color shows it has oxidated. Also, once motor oil has been used, it doesn't only mean contamination, but also the molecular structure has been cut down, which causes decline of lubricant, cleaning, and cooling capability. But, I have to say, compare with running a engine without oil, adding this would be better.
Aren't a lot of detergents added to oils during the initial refining process? Those detergents probably get burned off after the first use, and what the exact measurements, and ratios of those detergents are vary from company to company. Also from what I've come to understand, those are kept as a trade secret to avoid an "additive war" between companies. But I'm no expert, I could be way off base here.
Best bleaching earth for oil refinery from China for sale ! Feel free to Contact : Vera Wang MAIL:bentonite@binzhoubest.com Mob: +86 155 6309 9969 Skype: officebinzhoubest Whatsapp:+86 15563099969
He said he used an acid... shouldn't it have been a base? Lye is often used and is a base, not an acid. I'm calling bullshit on this entire video unless 90% of it was edited out.
Hello Brent! Could you please tell me all of the materials you've used in conducting this study because i made a science investigatory project about thermal used lubricating oil redistiller and i found this similar to my study. Please Brent I'm begging you. Thank you :)))))))
Best bleaching earth for oil refinery from China for sale ! Feel free to Contact : Vera Wang MAIL:bentonite@binzhoubest.com Mob: +86 155 6309 9969 Skype: officebinzhoubest Whatsapp:+86 15563099969
SORRY BUT CAN YOU SAY BEFORE /AFTER SPECTS? i THINK YOUR PRODUCTS LIKE SAME DIESEL OIL MIX.. BECAUSE YOU DIdNT USE HIGH VACCUum and thin film evaporator.. and process degrees? i didnt believe your test product is a good oil...viscosity? viscosity index?flash point? colour after 24 hours?
Best bleaching earth for oil refinery from China for sale ! Feel free to Contact : Vera Wang MAIL:bentonite@binzhoubest.com Mob: +86 155 6309 9969 Skype: officebinzhoubest Whatsapp:+86 15563099969
Just because you have a lab coat does not make you smart in burned oil is sut and water should not be being introduced from washing but it is a part of combustion so that could be expected but carbon is a lot of it but is all this cost effective
It is in Africa, where labor is dirt cheap and everything else more expensive that you would expect it to, owing to their crappy to inexistent transport infrastructure.
I was changing my oil yesterday and I asked myself that there must be some method in refining the used motor oil. Here I am looking at your amazing video. This is great in what you are doing. If I were to see refined oil on my nearby store shelves that meet the same certs as virgin oil I will buy it. Thank you for posting this video.
You said after working on the oil, You mixed with acid. What did you do first before mixing the acid with oil.
Which acid you have used to clean black oil
What is the ratio of the acid to oil
What is the name of the chemical that return used black oil to it formal color
But will your 10w 40 still be 10w 40 after all that?
Yes
Since 1859 we've been boiling crude oil (at very low temperatures due to the very low flash points involved) for 15 to thirty minutes to distill gas, kerosene (diesel & jet fuel), bunkers 1, 2, 3 and sludge (mixed with crushed rock to make asphalt). Not to mention the vapors (acetylene, propylene, butylene, etc..) not rocket science.
What kind of.is addtive and acit?
Which acid you have used? And your contact plz
Shit! That's cutting edge tech! I wonder if it will be available to us soon!
I let some oil sit in a gallon jug and a year later I noticed the black had settled and the yellow was on top.
contact me: brenttechnologiesltd@gmail.com
@@brenttechnologiesltd4739 hello sir, I am dotun ladejo from nigeria I want to purchase engine oil refiner from you and have a little training from u
Likely that water got into it and that black you see is the oil still and the water was front ain or a spill
this kid is amazing
Cicero Ar
Is it Acetic acid that is added added to the oil. Used oil already is acid, should this not be neutralized with a base compound? I want to clarify some dirty hydraulic oil so I can reuse it.
El ácido es para reaccionar y destruir los aditivos detergentes y dipersantes ,y el polvo y el ollin , ácido sulfúrico es lo ideal después se tiene que neutralizar con tierras diatomeas para que quede en un pH adecuado.
pls give. your contact address
It needs to be filtered in Clay to reduce acidity... then mixed with water vapors...
Добрый день
Первоначальный продукт какой?
Hello how can I get this
How can I contact you ?
The refined oil doesn't look clean, the red color shows it has oxidated. Also, once motor oil has been used, it doesn't only mean contamination, but also the molecular structure has been cut down, which causes decline of lubricant, cleaning, and cooling capability.
But, I have to say, compare with running a engine without oil, adding this would be better.
LIANG XU according to a video I just watched made by valvoline, a properly re refined oil will have almost identical properties to virgin oil
Aren't a lot of detergents added to oils during the initial refining process? Those detergents probably get burned off after the first use, and what the exact measurements, and ratios of those detergents are vary from company to company. Also from what I've come to understand, those are kept as a trade secret to avoid an "additive war" between companies. But I'm no expert, I could be way off base here.
You get a cheap 15 W 40 for 2 Euro/litre.
For now
can u tell me when acid n chemical are used to hygrate thee waste oil
contact me: brenttechnologiesltd@gmail.com
Best bleaching earth for oil refinery from China for sale !
Feel free to Contact :
Vera Wang
MAIL:bentonite@binzhoubest.com
Mob: +86 155 6309 9969
Skype: officebinzhoubest
Whatsapp:+86 15563099969
Machine price
He said he used an acid... shouldn't it have been a base? Lye is often used and is a base, not an acid. I'm calling bullshit on this entire video unless 90% of it was edited out.
How can we get sekatawas contact
wich sced
Hello Brent! Could you please tell me all of the materials you've used in conducting this study because i made a science investigatory project about thermal used lubricating oil redistiller and i found this similar to my study. Please Brent I'm begging you. Thank you :)))))))
contact me:brenttechnologies Ltd@gmail.com
hi .. can you help me plz !!
Best bleaching earth for oil refinery from China for sale !
Feel free to Contact :
Vera Wang
MAIL:bentonite@binzhoubest.com
Mob: +86 155 6309 9969
Skype: officebinzhoubest
Whatsapp:+86 15563099969
@@brenttechnologiesltd4739 Hi, can you please tell me what acids was used with engine oil, Regards Ali
@@brenttechnologiesltd4739 hi, I'll send you an email inshallah am in fort portal
Really amazing
thank you
Thank you
SORRY
BUT CAN YOU SAY BEFORE /AFTER SPECTS? i THINK YOUR PRODUCTS LIKE SAME DIESEL OIL MIX.. BECAUSE YOU DIdNT USE HIGH VACCUum and thin film evaporator.. and process degrees? i didnt believe your test product is a good oil...viscosity? viscosity index?flash point? colour after 24 hours?
hi faruk ... can you tell me more about re refining used oil plz !!
abdo bija hi Mr bija . you can use solvent s. or thin film evaporator. or or very very much clay and filters....
please say me what is viscosity index and viscosity of the your Distilation and can you show the picture of oil after 24 hours...???
can you send me your email .... or .. skype . viber to talk bater !!
Best bleaching earth for oil refinery from China for sale !
Feel free to Contact :
Vera Wang
MAIL:bentonite@binzhoubest.com
Mob: +86 155 6309 9969
Skype: officebinzhoubest
Whatsapp:+86 15563099969
do you train people interested to join this business? if yes please share contact
Just because you have a lab coat does not make you smart in burned oil is sut and water should not be being introduced from washing but it is a part of combustion so that could be expected but carbon is a lot of it but is all this cost effective
Nice
Time is money, additives, acid and labor and transport and electricity is $$$. End cost of 5 gallons of oil converted=35 US dollars? Not worth it!
It is in Africa, where labor is dirt cheap and everything else more expensive that you would expect it to, owing to their crappy to inexistent transport infrastructure.
What a load of cobblers sell me a website
heeeeelp plz
contact me: brenttechnologiesltd@gmail.com
BRENT TECHNOLOGIES Ltd
Good enough for Africa...
Hello.. kindly remove your comment , this is a form of hate speech
@@anthonykimani5464 Wow I get much worse things. I found I have to respect freedom of speech & developed a sense of humour.
@@anthonykimani5464 seeing as the guy is in Africa, it's a fact