@@diamondctrailers on FMax 312 gooseneck trailer with the dual tire and wheel 3 axle setup as well as the disk brakes can you get that trailer with the Lift axle on the 3 axle setup.
Great question! Shortest we can build on the hydraulic dovetail is 30’ - any shorter pushes the axles and suspension too far forward causing load distribution issues and less than desirable ride quality. We could custom build one with 8K axles but our recommendation would be to go with the PX210. We can build the 210 in an SS or super single. Better resale value as it would appeal to a wider variety of people later on. Also it would come with 235/18 ply tires. And the pricing between a custom one with 8Ks and the 210 would be pretty close making the 210 the better choice of the two. www.diamondc.com/trailers/pintle-hitch/px210/
Thank you for your hard efforts and delivering amazing product I was wondering could u guys or are you guys gunna make a scale system on the trailers so the driver knows what weight is being put on the trailer.
Subscribe to our channel for the latest updates and news: ua-cam.com/users/diamondctrailers
LOOKS LIKE DIAMOND C IS RAMPING UP THE COMPETITION...
What's the load capacity of the straight deck 8ft ramps?
I noticed that there was a hitch receiver with a 7 pin connection on the straight deck. What is that about? Is that an option you can add?
Great question! That was a custom add on that the customer requested so that they could pull another trailer behind it for a Christmas parade. 😁
Do y'all make a car hauler with the drive over fenders.
We sure do! The GTF and the MVC both have the option available.
@@diamondctrailers on FMax 312 gooseneck trailer with the dual tire and wheel 3 axle setup as well as the disk brakes can you get that trailer with the Lift axle on the 3 axle setup.
@@kenworthcustomlogisticstru8096 Great question! If you order the FMAX312 in air ride it comes standard with one lift axle. 👍
@@diamondctrailerswhat is the longest trailer length that you can get in a FMax 312 and can you get the step deck trailer in a 53 foot or 48 foot
@@kenworthcustomlogisticstru8096 Longest FMAX312 is 44’ deck. You can get an SDX312 in 48’ or 53’ overall no problem. 👍
BEST OF THE BEST OF BEST, THANK YOU JUST ORDERED MINE!
If only I could get it sooner! Backordered like 4 months or so. Do I need to come down and help weld or something???? ( :
Hope to get my trailer mfg co Pdq trailers mfg like y’all one day
🏆🏆🏆👍🙏
Thank you for sharing
⛄❄️🎅🎄
Diamond C trailers are the best
I cant believe he road that thing down
Great video. I have had this question
Can i order a power dove in a pintel pull trailer? 25-28 foot 8k axles?
Great question! Shortest we can build on the hydraulic dovetail is 30’ - any shorter pushes the axles and suspension too far forward causing load distribution issues and less than desirable ride quality.
We could custom build one with 8K axles but our recommendation would be to go with the PX210.
We can build the 210 in an SS or super single. Better resale value as it would appeal to a wider variety of people later on. Also it would come with 235/18 ply tires. And the pricing between a custom one with 8Ks and the 210 would be pretty close making the 210 the better choice of the two.
www.diamondc.com/trailers/pintle-hitch/px210/
How much cost forward
What’s the load angle on the Max ramps?
That’s a great question! Depends on the axle and tire combination but average is about 14 degrees.
Thank you for your hard efforts and delivering amazing product I was wondering could u guys or are you guys gunna make a scale system on the trailers so the driver knows what weight is being put on the trailer.
Thank you for the compliment! Something like that is on our drawing board 👍
@@diamondctrailers if u do the onboard scales i will buy and buy few more for my other trailers ❤️😍
@@diamondctrailers do you guys make a 25ft full hydrolic tilt gooseneck trailer with your new engineer flex frame????
@@clintonknight8897 At this time we do not.
@@diamondctrailers you don’t make 25ft full tilt trailers gooseneck ? Or you don’t make them em with your new engineer frame?
Buenas tardes me gustaría saber el precio de la de 40 piez gracias