My Next Masterpiece! - THE MULE Subwoofer Box Build
Вставка
- Опубліковано 15 січ 2024
- Today I begin building the new sub woofer box for THE MULE. I will be building a sealed box for a NVX Audio 10 inch sub woofer. The box will be carpeted with a vinyl front.
** NEW Limited Soundman sticker pack! - soundman.co/products/limited-...
Join my patreon! / soundman
THANK YOU ALL FOR YOUR SUPPORT!
Tuesday 1-16-2024 #soundman #subwooferbox #stereosystem
* Soundman iPad kits - soundman.co
** MY AMAZON FABRICATION STORE - amazon.soundman.co
***SHOP HERE!👇 SUPPORT THE SHOW!👇
* NVX amps, subs and speakers - nvx.com/?rfsn=3783897.71f3f5
* HIGH OUTPUT ALTERNATORS! - usalternators.com
* DOWN4SOUND SHOP! - down4soundshop.com
* TIM'S STEREO - / timsstereosystems - Авто та транспорт
What's wild is the whole reason I found this channel was because the video of him building the original box in the mule kept popping up in my youtube feed. Now here we are, he's building another. A monumental moment, feels like we're getting remarried ❤️ 🤣
Holy shit i found him with the same video too!
THIS
This box build actually took 3 months to build but with the magic of editing we get to see it in 24 minutes.. Good job Doug can’t wait to hear it bump!!
My day gets instantly better when soundman posts a video! Keep posting please
Put the Smackdown on that like button. I'm so excited to watch another episode of SoundMan . I've watched the Mule build since day 1
I've always found it's much easier to seal the inside of a box with silicone if you assemble it but leave the BACK for the last piece. This way you can seal the backside of the baffle and all the other inside corners very well and neatly. Then just reach through the speaker hole to seal the back as the last step instead of trying to jam a spoogegun into the hole and missing spots that you can't see or can't get your arms/hands into with a rubber glove. Done it this way for decades and NEVER had a box leak air! Even for those boxes where the pieces aren't 100% PERFECTLY cut.
P.S.~ I miss my Fukuda square. Ran it through the router and destroyed it AND the router bit, and it grabbed and kicked back and hit me square in the junk at like 100mph. Made me drop for like 30 minutes.😢
last mule box took him half a year
new box is done in half an hour 👍
Well the last one had glass panels and was a 6th order I think, plus a JL w7 8
Not to mention highly intricate design
This one gets a emveeaxe so no special treatment required.
Hes learning
Doug! You dropped a video just in time for me to drop a deuce! Thanks, brother!
I haven't watched in YEARS and bro is still working on the mule lol. I think last time I was here was when he just started putting the 3 way speakers in.
That box is gonna twist harder than your alternator bracket.
every young gun I know of that has tried to move to Florida ends up moving back home lol. can't afford to live there unless you are retired. excellent choice on coming back and starting his own thing. nice use of stuff laying around the shop. enjoyed watching you bring the mule some fresh air.
Hit that like button guys!!! If not RAFs mom is coming for you tonight!!
If you don't copy and paste this message to 12 different videos Rafa's mom will sit on your face at midnight
It doesn't matter what you click on
I'd rather rafas mom c** on me
def not clicking it then
I hit it before reading this, but man...good to know!😂
A cockpit instrumentation sticker is a must have... please Douglas 🙏 its already in your intro take my money!!
I get so excited when I see your video's pop up and then I get sad when it's done because I know it's going to be 3 weeks to a month until I see you again! 😭
This is the first sound man video I've watched in like 2 years and your still working on the mule😂
John Malcovich makes a subwoofer box. Oddly satisfying.
Dwam a sealed box... never thought I'd see you stoop to such levels 😲
Looks like Mark over at CAF has you stepping up your game. 😅
Yaaaas lil Scotty Kilmer is coming back!
I think its safe to say, that box will _not_ twist. Well done, Douglas.
Ordered my set of stickers ! Can't wait to put them on the BASS truck 😁
House music with the nail gun sounds....good stuff
Tell Jet it's not just stickers, it's also car wraps, and signs, and heat press merch.
Doug, let Jet use the CNC and have him make up some Bass Danglers.
Got Jack Tripper smokin angel dust again!
Last Mule box was a 2 year project!! Hope this one goes faster.
He was the reason why I got a W7 👍
Logo looks good Douglas. Interested to see how the vinyl looks 👍
Wow I remember watching the mule build years ago it's awesome to see the channel still going. Quick question what kind of double sided tape is that tho? I'm fascinated by it😅
Box Video! Yeahhooo!
Finally somone doing a build with the new NVX subs. I have v2's and have been interested in seeing how the v3's perform.
Im always impressed by Dougs builds. Id take a bj audio system any day of the week. Doug is so good at his craft he deserves a Mt Rushmore face
love the content
Another mini woofer build...
Still waiting on the Bassvan replacment mega high power epic build...
Good looking small man box
Only starting watching ur show ur funny and doing good job keep up good work and funny comments
Very interested to see how the upholstery goes into the lettering (if thats your plan).
Stretches in, pretty sure he's done it before.... Think he took classes from Zuckerberg in the kitchen!
spray glue and a little tooling gets it to sit in there nicely. common box building practice.
@@terryfales3371with or without cutting? I figure you could cut it and get it to sit in but if it's vinyl wrapped I can't imagine how that'd be possible without creasing
@@OtherDalfite I don't know where my reply went but I still got a notification of a comment..... You just stretch it like normal and massage it into the engraving. Fabric is plyable and easily contours into shallow engravings.
Don’t forget to add some heat!! For extra pliabilititty!!
We want Bang ‘n Holeufshen stickers asap
What happened to that crazy box that he had for the Mule years ago?
Nice. See ya in 2 months!
How about passive radiator testings video. Them go into a small space.
You could also make a video just like Garret Claridge and blow up some old speakers.
Nice to see Jack tripper back again . Now butt me
Damn I remember when Jett was making his video games video as a kid
The box building skills at its finest!
Mules starting to look good again dude. Right on. I do miss the bassvan tho....😢
Where the old skool Rave music after bunt me 😂
That Box is perfect for my son's power wheel!!!
Sometimes when I see a new soundman video come out sometimes I'll force myself to shit or if there isn't a video then I also just force upon myself a shit. Today Douglas graced me with another chance of producing a timely duece. Writing this gave me diabetes.
Ben from Japan in his Sunfire can build quicker than that. Lol where's Russell when you need him? Jkjk. Great vid Doug
thx dood u always make me laugh when nothing else can
Bangin🤘
Box is looking gooooood!
Great Video Doug
Matthew is the new Russell
Mule stickers turned out great 👍
More videos Douglas MORE VIDEOS!!!!!
Toby's video was good indeed
Love the content doug and thanks for all the inspiration. Mike at static says hello
Contrary to what people might be saying. It does matter what you do Doug.
Doug= I agree with everything you say and do, and you're funny, and handsome, and you build stuff, and you're creative! This is not a bot rather, it may have been the result of pot... love the stickers btw
Should be able to run that profile cutout pass in 2 depths max with a 1/4" endmill. 1 pass should be doable roughly 18000 rpm and 115 ipm at full depth and that is being conservative.
O Yes
This Look Good 🌷❤️
Doug, you did in one episode what Mark does in a year.
I know that nvx is your sponsor. Everything would be better if that was a w7 sub Doug. I just did custom fiberglass a pillars with grills, focal tkmx tweeter with es100k 4” as a mid. Kx2’s in the doors and a 8w7 rear firing center console. Zapco 8 channel dsp and 3 Jlaudio xd series amps. Kenwood headunit dmx957xr with the hd rear camera in my Mercedes metris cargo van. I learned a lot watching your channel and it really helped me. Thank you
Jizz Llama is overpriced bullshit.. smh
It doesn't matter what you did, Doug!!!!
Doug why haven't you built a box for Rafas Mom? Is that why you were out driving around looking for her thru all the parking lots? 😂 great vids keep em up
Great job *duggie fresh* the logo looks dope on that slant eye-face multi leftover slapper of a wang box. Lets see Justin from Amazon Bald Audio Guy do that.
That logo sick af
Oh hey 👋
sick music
You don't like wood glue bottles? (The weird goose neck ones, so much nicer than the titebond ketchup bottles!)
dare you to make the dashes in the M look like a black n red VU meter
Anybody else get nervous when he crosscuts long stock against the rip fence?
Doug where you holding onto the bit while finding the center at the same time pushing buttons with your other hand that could possibly turn on that bit??
I thought the second box for the mule was going to be crazier. Guess all that ball dust clogged his brain.
Damn, I'm early af. 👍👍👍
Its a beaut clark!
So Doug, seems your "bit" wouldn't hit bottom. Story of my life too
On another note, Mark would be proud of that box 🤣🤣🤣
BAISSSSSSSSSSSS
Whatever happened to the idea of converting an ac compressor for airing up the suspension? Love seeing you do quirky stuff like that!
I haven't made a subwoofer box in YEARS! but when I did, I used Liquid Nails and wood screws. Was that a bad idea? It seemed to work just fine.
Ending of this video is equivalent to getting your box filled then calling you a Uber to go home😮
Damn Dougie! I leave you for a week and you put out a banger! 34k views by the time I watched this non bumping box build! You should put a trumpet in the port for better bass boost! Keep up the crap work brother!
Anyone know how I can mount tweeters in factory pillar locations
I got you beat. My box build has taken 4 years and counting
BJ Audio has me 💀. Small vehicles get small boxes!! Cockford Ballsgate!!!
This is one clean box, shame it's not ported, would add few db of bass. Still, I bet its more than enough for that small cabin! :)
Well build box again Mr Bernard
I hope your going to be putting a proppa speaker box terminal in it from Steve Meade 😂
hi doug
BASS!
Is that a white Audi Q8 etron in the parking lot 😍😉.. 50% chance i assisted to build that vehicle...
I had that same box in 1997
You need a selfie pole for when you show your engineering/drafting skills main
Can you make one more cut, I missed part of one looking around your shop for a selfie pole?
Bass!!!!!
Jet didn’t want to go see his dad Scotty Kilmer?
He should’ve meet with him.
Glad he’s back home with you now 👌🏻
I was able to enjoy this upload on the comfort of my couch rather than the shitter!! 😂
Who doesn't love a good SM,BJ 👌
Nice work on the cnc router. I know it can be a bitch to get stuff like that up and running for the first time. Been doing prototype aerospace machining for 12 years.
I remember when you first built the box, makes me feel old. Do you by any chance do any Audison tuning by appointment?
Nice I enjoyed the video. NVX for the budget win.
💪
I remember doug milking that first box build on the mule 🤣