NC Miata Moroso Coolant Tank Replacement || NC Track Build

Поділитися
Вставка
  • Опубліковано 15 чер 2024
  • In this episode of the NC Miata track car build, the Moroso coolant expansion tank is getting installed. The coolant tank is the biggest flaw of the NC Miata, prone to cracking and leaking coolant, a potentially catastrophic failure. However, Moroso has a metal expansion tank that completely alleviates this issue. This episode walks through the install and the benefits!
    If you enjoyed the video be sure to subscribe to the channel! Thanks for watching and have a great day!
    See the rest of the build series here:
    • I Bought an NC Miata F...
    Check out the racing brake setup on this Miata here:
    • NC Miata Gets a HUGE B...
    00:00 Introduction
    00:19 Removal of OEM Tank
    02:47 Moroso Tank Install
    03:55 Test Run and Coolant Bleed
    04:19 All Finished!
  • Авто та транспорт

КОМЕНТАРІ • 10

  • @kokrb
    @kokrb 3 місяці тому

    Really good welding

    • @running2redline
      @running2redline  3 місяці тому +1

      Yeah they were all pretty much perfect, I imagine they have a machine do it since they are mass produced.

  • @robwalker8530
    @robwalker8530 3 місяці тому +4

    Always use the factory spring clamps. They provide contstant pressure as the components expand and contract due to the heat cycle. Worm clamps do not. I replaced my reservoir with the same moroso tank and the stock clamps worked perfectly. The trick is you need the specialized clamp pliers to open the clamps all the way. Regular pliers are not as effective.

    • @jacobborowiec9044
      @jacobborowiec9044 Місяць тому

      I saw a couple of how-to videos for this project on youtube and in both videos the top comment said to reuse the factory spring clamps. I purchased clamp pliers and spent a good hour trying to get the original lower spring clamp back on before giving up (I could not get the clamp over the rib on the bottom of the Moroso tank) and using a worm clamp. I was able to reuse the top 2 spring clamps. What type of clamp pliers did you use to get it over the rib on the bottom?

  • @Woobi3
    @Woobi3 2 місяці тому

    Did your oem expansion tank cap fit the moroso tank? My 2012 cap didn't.

    • @Woobi3
      @Woobi3 2 місяці тому

      nevermind lol, once mounted the cap, while a little tight, did work.

    • @running2redline
      @running2redline  2 місяці тому +1

      Sounds like you got it, it fits but yeah it’s pretty tight and take a fair bit of pushing down while twisting

  • @predatorhunteranon8315
    @predatorhunteranon8315 25 днів тому

    Is there any benefit in a ally coolant tank?

    • @running2redline
      @running2redline  24 дні тому +1

      None in terms of performance. Just increased reliability as that is the most likely failure for these cars. With this being a track car, weaknesses get exposed quickly, and wanted to avoid this one as a whole.

    • @likethewords
      @likethewords 23 дні тому

      If the stock one fails it cannot be caught fast enough by the driver to avoid engine failure due to almost instant overheating.