DE RESTRICTING A FZR 600 YAMAHA
Вставка
- Опубліковано 1 сер 2024
- De restricting my Yamaha fzr 600 restricted to 47hp so lets de restrict it to factory 91hp
If you would like to support my Channel, You can check out my Amazon Wish List and buy something for the channel.
www.amazon.co.uk/hz/wishlist/...
Stuff I use.
My filming equipment.
Huawei P30 Pro :amzn.to/2CImtyA
Rode Wireless Go Mic: amzn.to/3h8WP5n
Boya external microphone: amzn.to/3g3zZv9
Tools..
DeWalt Drill and Impact driver :amzn.to/3g51C71
Wire stripper: amzn.to/3g6RUkK.
US Pro Driver Bit Set: Screwdriver Bits Torx / PZ / PH / Flat Hex Spline Extra long Security 50pc AT822
Music creditited to Kevin Macleod www.incompetech.com - Навчання та стиль
I hope you enjoy this video and please comment.
Another helpful video, Gary. Thanks!
Brilliant video gary. I've never worked on a bike before but I'm enjoying watching all of your video's. Take care mate 👍
Cheers mate 👍🏻
That was a lot more restricted than I thought ,like you said ,I'm surprised it did run with those on !
It has a horrible grating noise or timing chain noise as if the chain has worn the plastic off the chain guides and it's running on the alloy guide or a bearing on it's way out
Fitted plenty of restrictors 5 to 10 years ago as part of the day job!!!! didn't remove many!!!! Another great video Gary.
First time iv removed some 👍🏻
Good video that. It's good to see you have unchained the beast back in to the wild :)
👌👌 Cheers bud
Nice one Gary... channel coming along nicely🤞🤞
Cheers gaz👍🏻
WOW! Never seen anything like that on a bike before,,,that’s ridiculous! really interesting video Gary, superb
Cheers Steve 👌
Sounds sweet that does now great job gary 👍👍👍👍
Cheers alan 👌
You made that look easy 😉👍
Superb,more top content from the top boys
Cheers Scott 👍🏻
Wow that was restricted great video Gary very nice bike
Cheers Paul
Love the video. And the bike
Cheers Michael 👍🏻
Great informative video.
Cheers Lee
That's a nice looking bike Gaz, be awesome on a hot summer evening cruising the lane's 🏁🏁
Cheers ade 👌
Another one lol😆 Nice bike Great video Gary mate
😂Cheers Ash 👍🏻
Gary 👍 nice work and informative video as usual.
How many bikes do you have ? What makes and engine size?.
Great video gary nice looking bike
Cheers Justin 👍🏻
Easiest to put the airbox on before the tank.
Lovely bike Gary it takes me back to the 90's. The exhaust has a lovely fruity tone to it.
👌👌
Adie rob
80's and 90's are my favourite era for sports bikes.
Now it will fly!👍
Love the sound of a Micron can. Pure 90's.👍
That seems a bit of a bodge. It's no good restricting the air. If you don't change the fuel too.
Like I said I'm surprised it even run 🤷♂️
That is simply not true. They are just a fit and go product, no adjustments required. Do you have any experience with carburettor's?
I have over 20 years of experience working on two strokes with carbs. And modifying them.
If you reduce air flow in, you have to reduce fuel too. Carbs have fixed jetting and can't compensate for the lack of air.
Something like the new Lectron carbs are more self adjusting. But still need carefully setting up first. And restrictions to the air box would still throw them off.
@@paulbudford20 Years eh, in that case you should know that restricting air flow on the engine side of things will have no effect whatsoever as all this does is - well, restrict the amount of air being pulled through the carb. IF on the other hand the restrictions were put on the AIR FILTER side, that is when it affects jetting etc, due to barometric pressures through the venturi etc. I used to fit the restrictors in the 90's when they came out. Fit and forget - The small hole fitted to the bottom.
Definitely the 1st , nice bike Gary
Cheers bud
I have a 1994 fzr 600 genisis deltabox combination lovely bike on do 9000 orignal miles very clean bike but i wonder if u have any tips with matinance and genral things i should do to keep this bike mint as it one of kind
Nice job very interesting 👍 👌🤙
👌👌
Did you test ride it befor and after?
Great video, doesn't sound right though, something is rubbing or rattling?
TOP MAN
cheers bud
Beast from the east lol nice one Gary 👍
Lol cheers bud 👍🏻
OMG another bike lol BIG THUMBS UP GARY LAD
Cheers Andy 👍🏻
cool video gary
Cheers Tim 👌
It smokes alot, Is it burning oil ?
A good few years ago I bought a grey import CBR600, it had restrictors in it, for the Japanese domestic market.
The difference when I removed them was unbelievable!
The bike was 10 years old when I got it and I assume the restrictors had been in it from new.
It had over 80,000 miles on it when I sold it and the engine was still sweet as a nut.
I often wonder whether the resrictors prolonged the life of the engine.
I'm not sure it could be possible I suppose.
It is now Parrot motor bike shop Bert. Good job.
Cheers Pete 🐦
I never knew you could do that with the inlets
thanks for that Gary always wonder how the real bike were restricted. I've sent you an email re your RS100's. Take care and stay safe, MIke
Cheers Mike il take a look 👍🏻
Do they dumb down sports cars too ?
Nice video!! do you know where I can get a fairing kit? I have been looking everywhere for one.
No sorry
How did you get the middle breather pipe back in ? I just can’t get it
It was a right pain 🤦♂️
Sounds like the timing chain tensioner needs done on that bike Gary
Cheers bud 👌
Great video. Gary, is the timing chain rattling? or is it the exhaust.
No rattling Gary sweet as a nut 👍🏻
So would this bike be running rich? Lack of air, would you have to adjust the carbs once removing the restrictions? It seems too simple. On my xj600 the restrictions were little plastic top hats that stopped the sliders opening fully.
Edit, just read the comments off people who actually know what they are talking about. So no effect on the mixture.
That's right gary,90.9 HP and around 145 MPH top speed ,from factory 👍( I did look that up !😆)
Cheers Ash 👍🏻
@@ProjectMan that's alright 👍
I have a 93 model in my shed. Only 16000 Ks on it lol. Presently respraying the Fairing.
Nice I use this one on the road 👍🏻
Bloody bike tests are so complicated these days with various restrictions. Great vid, but would think the carb will need upjetting to match the increased air flow. Would be worth comparing standard jet sizes as a comparison
The chap just stuck the restricters in didn't alter the Carb that's why it wasn't running right 👍🏻
@@ProjectMan Fair play mate, must have been running so rich!
It was you could smell it
Thus is another reason i love being american as we can have any cc bike as a first bike, so if say one want's a yamaha R1 or kawasaki H2 as a first bike they can and it doesn't need to be "restricted". Damn i love america.
Thanks Gary, are you going to sell that now? Take care
I'm using this one
Hi, I've got an conversation gilera runner 125/ vespa gts300ie it needs a vespa fuel tank and pump it has vespa loom and clocks would u be interested in buying it
Hi Paul drop me a email my email address is on my about page
good old classic bikes cant go rong wit old classic
Cheers bud 👍🏻
Let me know if you're selling this and how much you'd want for it, I had one of those in 1992, my first "big" bike, I'd like the nostalgia of owning my first sports bike again if it was cheap enough. Cheers sir.
nice i dune the old fzr 1000 87 thay wanted to keep the power down lol
🤣🤣
do they all come like this?
No mate
🤔👍👍👍
You need to get yourself one of those GoPros that fit on your head so you can take us along on a test ride.
👌
Them inlets look slightly cracked to me mate I would replace them it's probably runni g slightly lean
Cheers bud 👍🏻
@@ProjectMan no worries bud it's a sweet don't wanna see them pistons damaged
Are you keeping the bike gary
Yes Mark it's all Road legal 👍🏻
I smoke da spliff n watch dis vid,
is it me or is there a rattle noise at the restart
I think its just the mic as it sounds spot on 👍🏻
Do all FZR600 have restrictors??
No this was restricted for a young rider.
@@ProjectMan Excuse my question, do you know if the ignitor box under the seat should be hot while running? I have an issue with my bike. The positive wire broke off and blew the main fuse and lights, now it's running rough and can't figure out why. I just noticed the box gets very hot. Thank you for your help in advance
Is it for sale?
No bud 👍🏻
bet she moves now gary
👌👌
Sounds like a bag of spanner’s.
Ok so i followed all steps, but different from my bike but eh.. Turns out there's nothing there, no bricks or anything still in my papers it said restriction in carbs. My bike has a topspeed of 180kmh so it must be restricted.
Restrictors are awful especially on Mopeds.
Screwdriver mate
Lots of carbs 😜
🤣
I can't believe they restrict bikes over there in Europe. That's so totalitarian. Im grateful we can run whatever we want over here in the states.💯👌
Sounds like a bag of nails.
Love your videos and some really good looking bikes that u got on your next video can you Shout my UA-cam channel out atm I'm doing my peugeot speedfight 2 100cc up and my brother peugeot speedfight 2 50cc thank you so much