Great one! I missed the assembly part demoed in other videos. I would love to see a longer version where you place everything on the ring structure 😊 keep up with this amazing content!!
It's hard to create a creative medium and it's even harder to film because you have to film in a way that people can understand what you've done without talking and think about editing especially when you're short on time. Since I recently created a channel related to creativity and invention, I realized how good and difficult the master's work is, so my goal is to put my work on the quality level of the master. So that I can improve on UA-cam. So that I can create my own ideas and designs. For now, I started by making very simple things, but I have big plans.🔥
اخه از شما بهتر مگه وجود داره استاد. وقتی فهمیدم شما ایرانی هستی واقعا افتخار کردم و به جرعت میتونم بگم اولین یوتیبر ایرانی هستید که انقدر کارتون درست و تمیزه در این زمینه. واقعا آفرین و لطفا یکم بیشتر برامون ویدیو بزارید چون واقعا من همیشه منتظر کارای زیباتون هستم. با آرزوی موفقیت
من یکسالو نیمه معتاده این کانال شدم 😂 اولین بار از نوشته روی چسپ دوقلوی شفاف فهمیدم آقای مهندس ایرانی هستن و تو ذهنم جرقه خورد که آره خودشه منم از بچگی عاشق ساختن و اختراع کردنم بعد یه سال جون کندن خودم تنهایی یه کارگاه گاه ساختم و یک ماهیه دارم ویدعو می‌سازم البته فعلا چیزهای خیلی ساده دارم می‌سازم تا یکم دستم تو ساختن ویدعو و ادیت راه بیوفته و پول دستم بیاد و ایده هامو بسازم 🎉
@@PenguinDIY ممنون استاد بزرگوارید . راستی استاد بخاطر ویدعوی گردوی جادویی تبریک میگم.رکورد همه ویدعوهاتون رو شکست . اولش فکر نمی‌کردم زیاد ویو بخوره چون به نسبت بقیه کارها تون یکم ساده بنظرم اومد ولی بعد چند وقت که دوباره اومدم کانالتون رو چک کنم که ویدعو جدید گذاشتید یا نه شگفت زده شدم که بعد کمتر از یک ماه چنین ویوای گرفته از اونجا درس گرفتم که ویدعو اگه جنبه عمومی تری داشته باشه احتمال اینکه وایرال بشه بیشتره .❤️بازم ممنون استاد
This is maybe the coolest DIY build I have seen all year! If the idea is original and the execution is flawless - you dont need a hacksmith budget. Really well done sir!
Very nice, but for practicalitys sake you might as well make some kind of 'power gauntlet' with various devices attached. A lot of people wear those sort of 'tactical' style gloves, and it would be much easier to conceal all the batteries and capacitors within the backplate and wristband. You could take people, blind them with IR/UV lasers, and set them on fire or launch polonium darts, all with one inconspicuous device - which also has the superpower of keeping your hands warm!
Я думаю, здесь в лучшем случае не 400kV, а 10-20kV!! Дело в том, что расстояние промежутка искры напрямую зависит от высокого напряжения! Например 10kV - это 10мм, 20kV - 20мм, пробоя между двумя электродами, и так далее... А 400kV просто не достичь в таких малых объемах!! I think, here at best, not 400kV, but 10-20kV!! The fact is that the distance of the spark gap directly depends on the high voltage! For example, 10kV is 10 mm, 20kV is 20 mm, the breakdown between two electrodes, and so on... And 400kV is simply not achievable in such small volumes!!
Great project seemed really easy and a good of a tech angle though that's a bit bigger for a single ring with a idea will be probably two or not just for good measures at that point we're talking about a knuckle bracelet or just a simple bracelet or even a gauntlet, Great job like the video straight to it and clear message understood lol
That is so over the TOP!! WOW! 😳😏🤫😇 Awesome job! You even polish the thing! Don't mess up the little wires when putting in the switch or you will have to start ALL over again! 😱😖😩😫😤
I’ve thought about making one a lot and have the skills to do so but after seeing this yikes no thanks. Cool to see what it could’ve been but as I thought it’d be fairly large and danger. Highly impractical but very neat project plus that nice polish looks great!
you could have used a surface mount component half-wave multiplier charging a BaTiO3 storage capacitor and then discharging into a stepupp coil. you could either make the ring much much smaller or you could significantly bump up the voltage to around 2-4 million volts ;)
I think you need to modified the ring so the sides that touching adjacent finger doesn't too thick and it will be uncomfortable to wear. Maybe you can design it more like knuckles so it won't stress your fingers when wearing it.
Usted es muy ingenioso y como siempre haciendo inventos super geniales ,ya extrañaba que subiera videos siempre los veo mas de una ves ,saludos desde México
I've just watched your video and I'm really impressed! Would you mind sharing more details about how you came up with the idea and the process you followed to create the circuit? I'm an engineering student and I'm very interested in these topics. Thank you so much!
this mans primary focus is quality, and factory finish aesthetics
Great one! I missed the assembly part demoed in other videos. I would love to see a longer version where you place everything on the ring structure 😊 keep up with this amazing content!!
Me too
I was not able to film it.
@@PenguinDIY still loving it
X2 a mí también me gustaría ver esa parte
It's hard to create a creative medium and it's even harder to film because you have to film in a way that people can understand what you've done without talking and think about editing especially when you're short on time. Since I recently created a channel related to creativity and invention, I realized how good and difficult the master's work is, so my goal is to put my work on the quality level of the master. So that I can improve on UA-cam. So that I can create my own ideas and designs. For now, I started by making very simple things, but I have big plans.🔥
Золотые руки!
He has golden hands!
İn Azerbaijani:
Onun əlləri qızıldandır.
но вещь бесполезная
да, но в бошке фуфло
Coolest thing i ever seen.
@@Ivan_Sidorov полезные вещи и без умельцев производят, поэтому умельцам остаётся лишь всякую дичь изобретать.
واقعا دمت گرم بابت این همه خلاقیت
بی نظیر بود
امیدوارم همیشه موفق باشی
You are the best inventor that i ever seen in ma whole life
اخه از شما بهتر مگه وجود داره استاد.
وقتی فهمیدم شما ایرانی هستی واقعا افتخار کردم و به جرعت میتونم بگم اولین یوتیبر ایرانی هستید که انقدر کارتون درست و تمیزه در این زمینه.
واقعا آفرین و لطفا یکم بیشتر برامون ویدیو بزارید چون واقعا من همیشه منتظر کارای زیباتون هستم.
با آرزوی موفقیت
من یکسالو نیمه معتاده این کانال شدم 😂 اولین بار از نوشته روی چسپ دوقلوی شفاف فهمیدم آقای مهندس ایرانی هستن و تو ذهنم جرقه خورد که آره خودشه منم از بچگی عاشق ساختن و اختراع کردنم بعد یه سال جون کندن خودم تنهایی یه کارگاه گاه ساختم و یک ماهیه دارم ویدعو می‌سازم البته فعلا چیزهای خیلی ساده دارم می‌سازم تا یکم دستم تو ساختن ویدعو و ادیت راه بیوفته و پول دستم بیاد و ایده هامو بسازم 🎉
ممنون از تعریف و توجه شما
تا جایی که بتونم زودتر ویدیو میزارم
@@PenguinDIY ممنون استاد بزرگوارید . راستی استاد بخاطر ویدعوی گردوی جادویی تبریک میگم.رکورد همه ویدعوهاتون رو شکست . اولش فکر نمی‌کردم زیاد ویو بخوره چون به نسبت بقیه کارها تون یکم ساده بنظرم اومد ولی بعد چند وقت که دوباره اومدم کانالتون رو چک کنم که ویدعو جدید گذاشتید یا نه شگفت زده شدم که بعد کمتر از یک ماه چنین ویوای گرفته از اونجا درس گرفتم که ویدعو اگه جنبه عمومی تری داشته باشه احتمال اینکه وایرال بشه بیشتره .❤️بازم ممنون استاد
Nice job, if you're dealing with epoxy you don't have a right for any mistakes.
Looks like a futuristic James Bond fashioned device lol
never seen something like this before really amazed by your engineering !!
This is maybe the coolest DIY build I have seen all year! If the idea is original and the execution is flawless - you dont need a hacksmith budget. Really well done sir!
واقعا از صمیم قلب بابت هنر وذوق که بخرج می‌دید و زحماتی که می‌کشید ازتون تشکر میکنم. لطفاً زود به زود ویدیو بزارید ممنون ❤
خیلی خوب درست میکنه
@@usicx خوب چیه آدم کف میکنه بدون لوپ چجوری اونهمه قطعه ای ریزو سرهم لحیم میکنه بدون لرزش واقعا دمش گرم ویدوهای قبلیش ببین یکی از یکی خفنتر
ممنون از لطف شما
تا جایی که بتونم زودتر ویدیو میزارم
@@PenguinDIY خیلی سالاری ❤️
@@mahmoud-69جراحی چیزی بوده زندگی قبلیش. اخه فقط دقت نیست خلاقیت هم میخواد مثل یه مجسمه ساز. نمیدونم مغزش چجوریه
You have so much wisdom in your head that you make good things possible😊
This dude should be a surgeon. His hands are Hella steady
he looks more like dentist.
Well done.
Very well done.
Now for the accessory most needed; an emp sleeve!!
Enjoyed your build and the video.
Cheers!
this is the best tazer ever, keep yourself safe
Thoroughly impressed. Incredible craftsmanship. 🙌🏻
WOW, that’s awesome. Kinda big as a ring but the only one who’d really complain is anyone trying to attack. Very good.
Every Indian girls and children need this one😢❤❤❤ appreciate from India (tamil nadu)
hell nah❗️❗️
@@moxiedopeAbe gandulle 😅
🫵😆🤢🤮🤮
@@moxiedopethey need this
THATS SEXIST, BOYS NEED ONE TOO BECAUSE PEOPLE KIDNAP BOYS TOO
Very nice, but for practicalitys sake you might as well make some kind of 'power gauntlet' with various devices attached. A lot of people wear those sort of 'tactical' style gloves, and it would be much easier to conceal all the batteries and capacitors within the backplate and wristband. You could take people, blind them with IR/UV lasers, and set them on fire or launch polonium darts, all with one inconspicuous device - which also has the superpower of keeping your hands warm!
بی صبرانه منتظر ویدیو اموزشی جدیدتون بودیم بازم مثل همیشه نو اوری ظرافت و تمیزی ضمیمه کارتون بود.
ممنون از شما
Wonderful
I have never seen such a beautiful work
Я думаю, здесь в лучшем случае не 400kV, а 10-20kV!! Дело в том, что расстояние промежутка искры напрямую зависит от высокого напряжения! Например 10kV - это 10мм, 20kV - 20мм, пробоя между двумя электродами, и так далее... А 400kV просто не достичь в таких малых объемах!!
I think, here at best, not 400kV, but 10-20kV!! The fact is that the distance of the spark gap directly depends on the high voltage! For example, 10kV is 10 mm, 20kV is 20 mm, the breakdown between two electrodes, and so on... And 400kV is simply not achievable in such small volumes!!
This genius don’t even need scales to weight the materials 😳
It's like Tony Stark's wedding ring.
С удовольствием смотрю на такую аккуратную работу . Очень красиво .Жаль ,что кольцо невозможно сделать более компактным.
The devices you make are similar to factory devices, without any scratches or extra corners ❤
Wow! With that resine is so cool!
While it’s an excellent defence tool, it can easily be a self-hazard!
Great design btw!
So discrete too. No one would ever notice it wasn't a regular item of jewelry.
your videos are very good, please make content as long as you can. One of my favorite DIY channels.
micro work king
keep doing these amazing projects supporting you for ever
Great project seemed really easy and a good of a tech angle though that's a bit bigger for a single ring with a idea will be probably two or not just for good measures at that point we're talking about a knuckle bracelet or just a simple bracelet or even a gauntlet, Great job like the video straight to it and clear message understood lol
همون طور که انتظار داشتم اینم عالیه ❤
It's like iron man new secret weapon. But it's a marvelous build. ❤ Pure skill.
I'd buy one if it was a bit thinner, for no reason other than it's unique and I'm sure a fun item to show off!
عندما نتحدث عن الابداع ❤️🩹
MashAllah!
This is called a true master of micro electric skills & micro soldering. I love your videos.
wao những việc đó có thể được sao, thật k thể tin nó có thể nhỏ gọn đến như vậy, bạn number one
That is so over the TOP!! WOW! 😳😏🤫😇 Awesome job! You even polish the thing!
Don't mess up the little wires when putting in the switch or you will have to start ALL over again! 😱😖😩😫😤
Im a sucker for Tech set in resin, and for shockies
awesome. maybe use a vacuum chamber to get rid of the bubbles in the epoxy. vibration like from a toothbrush might also help
باعث افتخاره که یک ایرانی همچین مهارتی دارد 🌷👏
ممنون رفیق
👍👍
خیلی دقیق و تمیز ، واقعا لذت بردم 🌷🌷
ممنون
Id sell/buy these in a heartbeat, but make it a wristband with Real Tazer Power. This guy is a genius.
That's not the point
For this vidiou I wait for 4 month and finally you upload vidiou
I’ve thought about making one a lot and have the skills to do so but after seeing this yikes no thanks. Cool to see what it could’ve been but as I thought it’d be fairly large and danger. Highly impractical but very neat project plus that nice polish looks great!
So many times throughout the video I headed towards the Like button, each time forgetting I already liked the video. Good job 👍
Emamrable as always..😷🔥
Me salio como recomendación de UA-cam i que buena recomendación descanso después de trabajar viendo este contenido meramente informativo e educativo.
Разобрал зажигалку и собрал кольцо? Молодец
А теперь разбери кольцо и собери обратно зажигалку
you could have used a surface mount component half-wave multiplier charging a BaTiO3 storage capacitor and then discharging into a stepupp coil. you could either make the ring much much smaller or you could significantly bump up the voltage to around 2-4 million volts ;)
Kitni baar 4RA pe khelte khelte itni mast yaadein ban gayi hain
4rabet ka interface bhi kitna user-friendly hai, easily sab kuch manage ho jata hai
A ring for 007. Great work.
این مرد با این مهارت در دنیا تک است ولی توی ایران قدر این افراد را هیچ کسی نمیداند❤❤😢😢
ممنون. شما لطف دارین
bro you are real genius and creative
I would absolutely love a detailed build video, mebbe explaining the layout of the different capacitors and the diodes
I think you need to modified the ring so the sides that touching adjacent finger doesn't too thick and it will be uncomfortable to wear.
Maybe you can design it more like knuckles so it won't stress your fingers when wearing it.
❤ quá cao siêu, không thể tưởng tượng nổi, người vỉ đại khó có ai làm được . Number one World.
Great craftmanship. A doubt, the heat generated at the arc will melt the epoxy resin
It does not generate too much heat to melt the epoxy.
تنها کسی که وقت میزارم لایک و کامنت میرارم شمایین
واقعا ارزش قائل میشین برای منه مخاطب ممنونم ازتون بابت کیفیت بینظیر ویدیو هاتون
Dude...... You knocked it out of the park
It is not 400kV, it is 10kV max
Even 4.8kV max according to the 3 1600V caps in series. But that's certainly 400 "aliexpress" kV 🙂
@@levieux1137 Yeah, 400 kV can jump across 40 cm
@@levieux1137 I have "aliexpress 400 kV" module and it is so weak. I can touch it)
More like 3kV - 9kV
That's a small air gap so it's gonna be the minimum potential difference needed to cross gap.
Love from India ( Bharat )❤❤❤❤❤❤❤
Never ever seen a quality content like this..
🎉
Pure craftmanship...❤
Keep going man...😊
Like If U Agree....❤
*fiddles with the ring
*presses button💀
*tazes self💀
I have never seen a person like *Penguin 🐧 Diy* Love you brother ❤
یکی از بهترین تولید کنند های محتوا در این زمینه شما هستید
امیدوارم موفقیت های خیلی بیشتر داشته باشید❤
Liked the presentation with details
Now imagine washing dishes and a dish hits the button.
Wow, this is a real masterpiece!👏
I bet it will hurt quite a bit if you touch it 😅
I came across your channel and your videos are so interesting 🔥🔥🔥🔥
You have zero subscribers
Guess what you got a sub🎉
Dude how incredible!! You make small and powerful projects!
stunning detail 👌
Precision at its excellence ❤❤
Mujhe 4ra ke features sabse best lagte hai, ab T20 pe aur bhi fayda hoga
Amazing I really like your work can you make this ring smaller
Cool, but ElectroBOOM might need to FAF - rectify this, to see if the 400kv is real. (Not to be rude though, ‘cuz it’s still pretty cool!)
سلام مهندس ساله نو مبارک 🌹
Perfect ❤️
سلام
سال نوی شمام مبارک
WOW!!!
It was great, your work is unique.Where do these ideas come from?
Bhai, T20 World Cup + 4rabet = dhamaka hone wala hai, can't wait!
Bros made a tiny version of Tony starks arc reactor as a ring.
I failed to make this😢
But i try it again 😤
Usted es muy ingenioso y como siempre haciendo inventos super geniales ,ya extrañaba que subiera videos siempre los veo mas de una ves ,saludos desde México
gracias
Amazing as always man!!
You always raising the bar i swear!!
Excelente trabajo man...eso si, no es apto para descuidados, te lo pones medio mal y te electrocutas vos🤣🤣🤣
Inteligência descomunal! Such intelegence!
Sir you are so hardworking and intelligent please I request Avery day update new Idea's awesome fabulous 😍❤❤❤
With no doubt, I love this ❤️
goldsmith/master jeweler 57 yrs experience here: *i am speechless*
*You're The Master*
*i Like, OLE'!* 💃
It will fit perfectly on Thanos hand 😅😅😂
So badass
Astonishing as usual. Thx for ur inspiring videos
its like the iron man heart u just made up a new element 😂
happy to came back 🔥🔥🔥
I really missed your new video
ارزش لایک داره با کلاس بود
Nice work my guy
I've just watched your video and I'm really impressed! Would you mind sharing more details about how you came up with the idea and the process you followed to create the circuit? I'm an engineering student and I'm very interested in these topics.
Thank you so much!
That looks beautiful Awesome ⚡️
отличная работа мужик!
OMG look amazing how much time did you plan this ?
beautiful piece