Thank you for this Beautiful circuit. I made one and then it took me days to figure out Why it works the way it does. But now I got it! what you taught me is that the outputs also sink current when Low. 🎉
Thanks for sharing! But in min 3:10 - 3:15, you connect colour cables to the positive side of the LEDS, and the circuit diagram indicates that you has to connect them to the negative ones.
As a beginner I am amazed of the way you manage to put up the components together and the result ! very nice video !! thanks for sharing your knowledge.
Nice those led in a circle. Just to bad it can go out of sync in case of power loss. Any way to fix that with a few extra components? Would like to fit something like that in brake lights.
Bom dia Tech Eu gosto muito dos seus vídeos São Super legais São Sensacionais Sempre um mais Interessante que Outro Parabéns Meu amigo por mais um sucesso Que Deus Abençoe 🙏Sempre com mais Inteligencia Gostei Muito Legal Demais.
On your circuit diagram, the yellow & blue wire around the let's. Are they all soldered together? Meaning the blue wire is soldered to ever single led and the yellow wire is also soldered to the same leds that the blue is?
I am a student, my teacher asked me to complete a scientific project, so I decided to choose a project and try to complete it, but I was not able to solder the copper wire with the led pieces. Can you help me? 😊😊
Hello, is the copper wire you run on the outside have some insulation on them, so you're linking L1-L1,L2-L2, L3-L3 etc? Its difficult to see exactly the circuit
Bro if we want to add with amplifier output and LED runs fast and slow like following beats and bass how to do his please reply or ham hor koi resistor laga sakte hai
How should I make a circuit to operate for a long time in the form of 12 cat sliding lights with a 9 volt battery? What type of LED should it be? 15 days - 20 days to run (10 hours per day)
I am a student, my teacher asked me to complete a scientific project, so I decided to choose a project and try to complete it, but I was not able to solder the copper wire with the led pieces. Can you help me? 😊😊
In negative side led you are connected only each 1 no. & 2 no. But other are not connected , you leave it blank. Without connecting any connection negative side ( 3-8) how is glowing ??? Pls explain
It is not clear what you are doing with the thin copper wire. You show something like 1 to 1, L1 to L2, then L2 to L2. But then it appears that there are very complicated connections.
3:11 yahan per app ne (74hc595) ic se only two output liya hai led ke liye per video Mai app ne ic ke sath app ne rainbow 🌈 wire lagiya hai jo ki led se bhi attached hai please reply
Can you make the same indicator for the HDD in the PC to spin the circle when the hard drive is active? The more activity, the faster the circle will spin!
Thank you for this Beautiful circuit. I made one and then it took me days to figure out Why it works the way it does. But now I got it! what you taught me is that the outputs also sink current when Low. 🎉
Excellent ....... I called u LED MAGICIAN,,👌👌👌
😀🤗
Paid briwn nose!!!!
Schematics would be most welcome by everyone, engineers always write things down
He provides the best schematics 🙂
Please this light diagram
mạch rất hay cảm ơn bạn đã hướng dẫn làm 👏👍🏳️🌈
Most welcome
Your explanation is very good 👍👍
this guy doesnt even need a breadboard. crazy soldering skills.
Thanks for sharing! But in min 3:10 - 3:15, you connect colour cables to the positive side of the LEDS, and the circuit diagram indicates that you has to connect them to the negative ones.
You did a great job of showing how to make those cool projects! Great work!
As a beginner I am amazed of the way you manage to put up the components together and the result ! very nice video !! thanks for sharing your knowledge.
You are welcome!
@@TechArrangebạn có thể cho tôi xem sơ đồ mạch rõ ràng hơn được không. tại tôi không hiểu gì về điện tử. nên tôi cần cái sơ đồ rõ ràng hơn
tôi yêu bạn
Хорошая идея. Мне понравилось. Я даже подумываю таким способом сделать ходовые огни на машину.
ভাই নরমালি একটা লাইটের ভিডিও বানান ৩মম লাইট দিয়ে।যে টা আমরাও বাসায় বসে করতে পারবো।।।
'
wow very good LED project...
try backward reverse
Very nice. You're a creative guy, and you're good at air wiring!
Thank you 😀
NICE CIRCUIT MAKER
Thanks
This led chaser is supremely superb. I want more like this.
😀 🔥 Thanks
Nice those led in a circle. Just to bad it can go out of sync in case of power loss. Any way to fix that with a few extra components?
Would like to fit something like that in brake lights.
Top demais 💪🏿🥇🏆 parabéns de todo o Brasil 🇧🇷
Wow,good idea to make chasing led circuit
Thank you
Yes working led light 😀
Great 👍
😅😅😅well information good show 😅😅😅
Wow amazing
Sir please make S letter LED
Watch my video!
ua-cam.com/video/RSJZJXzgZQo/v-deo.html
how does all LEDs with different polarities connected to each other works? based on your video
Amazing work.Kindly share list of materials used and specifications list please.
Please in description
Thank you for watching
Bro last make LED 13v working that change 5v thunder light video upload
wow 😱 amazing creativity👍
Thanks dear
8:20 Use different colour lasers that look badass lol
It is difficult to show in the diagram but it would be nice as technically if you specified in writing connections of 3.'-8.' leds.
Great 👌 project keep it up engineer
😊
crazy... great video, thank you. can anyone explain to me why / how the second circuit works in detail?
Amazing Start Music😱
Thank you 😀
Watch my video!
ua-cam.com/video/RSJZJXzgZQo/v-deo.html
Bom dia Tech Eu gosto muito dos seus vídeos São Super legais São Sensacionais Sempre um mais Interessante que Outro Parabéns Meu amigo por mais um sucesso Que Deus Abençoe 🙏Sempre com mais Inteligencia Gostei Muito Legal Demais.
Thank you so much 🙏😊
Very tough!! Better I purchase from market 🙄😅
Very nice
Thanks
Watch my video!
ua-cam.com/video/RSJZJXzgZQo/v-deo.html
PERFECT for the project I have planned. THANK YOU 🙏
You are so welcome!
On your circuit diagram, the yellow & blue wire around the let's. Are they all soldered together? Meaning the blue wire is soldered to ever single led and the yellow wire is also soldered to the same leds that the blue is?
I am a student, my teacher asked me to complete a scientific project, so I decided to choose a project and try to complete it, but I was not able to solder the copper wire with the led pieces. Can you help me? 😊😊
Woww good job 👏🙏🙏👍👍
Thank you! Cheers! 😊
Watch my video!
ua-cam.com/video/RSJZJXzgZQo/v-deo.html
You are a super men ,beautiful works!
Glad you like it
you are an artist. Awesome man.
Thanks dear friend
Thank for sharing. I like it
Thanks for likin
So beautiful 🥰🥰🥰🥰🥰
Thank you so much 😀
Watch my video!
ua-cam.com/video/RSJZJXzgZQo/v-deo.html
how did you even is gonna work like that, what's the principal behind it sir.this is an amazing job.🎉❤
muy bueno exelente amigo y se puede hacer que el giro de reversa se de tenga siga
Hello, is the copper wire you run on the outside have some insulation on them, so you're linking L1-L1,L2-L2, L3-L3 etc? Its difficult to see exactly the circuit
If there was insolation he wouldn't be able to solder them
Bro I am going follow the same led chaser circuit used in this video (circle)but is it possible to use 64 leds using the same circuit pls reply
Yes you can
@@TechArrange thanks bro
As always incredible
😀😊
Watch my video!
ua-cam.com/video/RSJZJXzgZQo/v-deo.html
Good job 👍
Thanks 👍
Thanks I want this one with assembled set
Thank you dear.
But where is your location?
those very good soldering
Bro if we want to add with amplifier output and LED runs fast and slow like following beats and bass how to do his please reply or ham hor koi resistor laga sakte hai
Works for motorcycle installation or adaptations
Good
Thanks
Please sir make a video in 100 light this type I want to make it on 100 RGB led
Very good work sir
Thanks 😊
nies bro
Thanks
How should I make a circuit to operate for a long time in the form of 12 cat sliding lights with a 9 volt battery? What type of LED should it be? 15 days - 20 days to run (10 hours per day)
Excelente aportación 👌👌 tienen que ser todos de el mismo color o se puede hacer con dos o mas luces de colores
Yes any color can be led
@@TechArrangecó thể làm nhiều màu khác nhau được không bạn
Bhai video bohat zabar dast hai par connection ki samajh nahi ai baray Karam connection tafseel se batay
si le coloco una transformador de 5v, no habrá problema supongo?
Can use
hi
I am a student, my teacher asked me to complete a scientific project, so I decided to choose a project and try to complete it, but I was not able to solder the copper wire with the led pieces. Can you help me? 😊😊
I mean how did you solder the copper wire with the led pieces and What material did you use?
Bro you will make a project report of this chaser light.
I don’t understand
Good video
Thank you
Excellent 👍
Many many thanks
Gracias prof.exito
Hello, excellent contribution, can the circuit be powered with 12 volts?
Maximum 5v
And secondly how did u connect led 1to 8 and all the 32leds are connected together
Broo...can you make a circuit like this in which....led's turn on one by one and hold....like a drawing a circle of light....
Ok I will try
Sir if we increase the number of leds than what is the value of resistor
There will be no change in components 👍
@@TechArrange thank you
These Type Of Light LEds SHould be In Cars Like BMw's As Angel Eyes, But More Dense And They Should Move Like This, That Would Be EPIC !
That's all we need, another stupid idea for car lights.
Very Clean Work Bro 🥰
Love it 🫡
Thanks dear
Nice work
Thank you
Best project
😀
Why not use a breadboard to solder down your components? I think it would look neater. It probably wouldn't cost much more than your brass wire.
Very nice bhai
Thanks bro
Bro make a light which blink according to sound for dj
Yes
Creative video, thanks for sharing :)
Thank you too
Can we perform the both experiment vice versa like the first circuit with rgb led's and second with single colour led
Yes can use
great ❤❤❤
Thank you
now take red leds and put it in the rear light from a skyline with a infinite mirror behind
Excellent
Thank you 😀
Bro! You are an artist! Really cool video I'm glad I found them.
Thanks dear
This project is very good!
Thank you 🤗
If we fit more LEDs in this circuit will it work?
Yes
Super
Thanks
Vair cool Video
Con q voltage funciona el último proyecto amigo? Se puede usar en un automóvil ?
can use 5v supply
nice
Good 👍👍👍
eres un Dios!!!
i am not god dear friend but
glad you enjoyed it 😊
Thank you for watching 🙏👍
In negative side led you are connected only each 1 no. & 2 no. But other are not connected , you leave it blank. Without connecting any connection negative side ( 3-8) how is glowing ??? Pls explain
For more details please open circuit diagram
@@TechArrangeIn circuit digram each one led side(3-8) are not connected. Then how they glowing ?? Pls let me explain. I want to create
@@TechArrange pls give me your mail id or whatsapp no.
It is not clear what you are doing with the thin copper wire. You show something like 1 to 1, L1 to L2, then L2 to L2. But then it appears that there are very complicated connections.
Naice broo
Thank you
Nice
Thanks
Good
3:11 yahan per app ne (74hc595) ic se only two output liya hai led ke liye per video Mai app ne ic ke sath app ne rainbow 🌈 wire lagiya hai jo ki led se bhi attached hai please reply
Can you make the same indicator for the HDD in the PC to spin the circle when the hard drive is active? The more activity, the faster the circle will spin!
I mean how did you solder the copper wire with the led pieces and What material did you use?
I am using
soldering iron , solder wire , and flux
thank you
@@TechArrange
make a kit with a cooling fan for bmws and you will make a lot of money.
8mm led ke sath bana sakte h kya ye sab project 🙄
Yes
hey bro..What if the led is replaced with red..? 😀
Yes 👍
thanks bro,,🤝