long boat SandBlasting
Вставка
- Опубліковано 11 кві 2024
- Ready to give your boat a fresh new look? Before diving into that repaint project, proper surface preparation is key, and sandblasting is the ultimate solution! Join me as I demonstrate the art of sandblasting for boat surface restoration. Say goodbye to stubborn layers of old paint, rust, and corrosion as I blast them away, leaving behind a clean canvas ready for a flawless repaint. Don't let your boat's surface condition weigh you down - embark on this transformative journey with me and watch as this vessel undergoes a stunning makeover. Get ready to set sail in style with a beautifully repainted boat that turns heads wherever it goes!
A lot of maintenance and equipment needed for your work. Seeing the maintenance of your equipment is almost as interesting as seeing the equipment working. Thanks for making these.
😊 I don't show half of the work needed to keep it all working as it should maybe I should add. I've just fitted a new alternator and batterys water pump and thermostat but didn't film that 🫣 I've still alot more to do to get things upto 100% 😏
So great to see young Jack helping his old man out 👍. Amazing video Mick. Still don't no how you blast without gloves 🤔😁 I would feel naked 😅. Nice job mate 👍 👌 🇭🇲🏴
Haha he's a good help sometimes 😄 skin like a rhino mate or stupidity haha
@@Mobileblaster haha 😆 your a Englishman 💪💪 tough 💪 🤣. You can handle the cold 🥶 better than me.
Don’t blast without gloves - sooner or later more likely sooner you will notice small black spots on your hands which will not go way. The spots will later become infected, the infection becoming persistent and leading to serious issues. By the time you notice the black spots it is too late as the debris from the blaster along with bits of blast media have become imbedded under the skins epidermis ( outer layer).
@grahamc887 Scott knows all too well what it feels like he's a tattoo like scare from the blaster 😂 how soon we talking? I use gloves on cold days but summer and hot days I don't and its been 15 ish year so and I've yet to hit myself well I fell off a jcb bucket (load all) once and my 1st reaction was put my hands down to brake my fall I would have been better just holding the pipe and fall however because I got bit on the cool down across the leg 😬 that hurt more than the fall would have haha
@Mobileblaster 😅🤣 depends on what abrasive you are using on the day. Fact is you Mick definitely cover up when you blast with shot blast 👍. Each to their own legend.
Another brilliant job pal, nice to see your lad helping out , in these days of video games and such its nice to see the youngsters getting their hands dirty helping dad , 😁👍
Don't get me wrong he still spends a lot of time on the computer but he does enjoy jobs I give him I had him jetwashing the path off I spent 5 minutes showing him how to do it safely and he did a good job fair play to him if I can line interesting projects up that's safe but challenging for him he loves to get stuck in 👌👍
Aww, I see you had little Mick helping you out.😊 That's really good he's taking an interest in what you do and making a start by fixing his bicycle 😂 I hope he'll be as good as his Dad one day. Great, you were able to fix the leak (hindsight is a wonderful thing regards to Figure 8) and another superb job on blasting the boat. Yes, the boat does look a lot newer than 15 years. Just shows what good maintenance and a good blaster can do 😊
Yeah r Jack loves helping out he will try his best what I have learnt if I cannot find him something to keep doing he losses interest real quick and starts messing with stuff coursing more work haha he's a cracking help tho when he's got a clear instructions on what we need to achieve. Yeah I was shocked when I asked the age I wouldn't have said that old that's for sure it's was like new 😊👍
That's probably the best hull I've seen you work on Mick.
It's definitely up there as one of the best used boats I've blasted and I've done some boats 😂👍
Quality boat. I think the condition is a combination of anodes, maintenance and a decent builder in the 1st instance
Yeah I like the front bit on this real nice shape and the quality of the build was 2nd to none even the joints wasn't warped and nice and flush he mentioned something about this boat also had something that when it's plugged in to 240v it don't use the power like normal boats it charges and the boat runs off its own power supply I can only think battery banks or some kind of earthing that don't earth to the boat or water I've forgotten what he called it sounded very technical but obversly something is working as it was in real nice shape to say the years its had in the water 👌👍
@@Mobileblaster galvanic isolator?
@DEmma1972 that might be what he said I'm not 100% but if it dose something similar as to what I'm trying to explain then yeah haha
Super to jest zrobione brawo jest to pięknie wypiaskowany statek gitara te wżery epoksydem pokryć klejem do metalu i epoksydem pomalować podkładem i farbą jakąś porządną pomalować to wszystko dokładnie i już będzie na pewne lata Pozdrawiam serdecznie. 👍👍👍👍👍
😊👌👍
So satisfying as a spectator seeing the work done in time lapse. Hard work but it must be rewarding. I think if I had a career to do over it would be in this type of field.
It looks alot more glamorous than it is 😏 I'm covered in crap every day and breathing grade d air all day (it's filtered compressed air) breathable but it cannot be good for ya 🫣 only time will tell 😳
Respect to you ! I am the master airless sprayer with 600 litres a day and a -7.5 house spray. But your spraying deserves maximum respect! I can imagine wearing the helmet and arm ache you are a warrior! Wow I’m binge watching now. Retired as well .
They are records of mine btw I heard of nobody has done same, ps all I ever wore was a Moldex rubber mask ! Your like a deep sea diver with that helmet, I’m from South Yorkshire btw and ex industrial worker
@ChayAaronStevenson11 😊 the kick back presure is something that don't show on camera yeah its definitely not a job for a unfit person. It would be impossible to blast at this level without having this lid 😊👌👍
@@Mobileblasterthere’s no kick back with airless sprayer just arm ache and overspray! To do 600 litres of paint in one day takes 10 hours so lots of concentration like your job but I say yours is top of the list ! I thought mine was hard! Oh and like you everything I did was on price on industrial new build sites with my own machinery. Well good to you keep up the good work!
Nice to see you have a big area to work around the boat ...
Yeah its a big Dock this 1 even with the biggest boats in its still plenty big enough hear 👌👍
Good.job Nice boat good show 👏👏👏👍👍👍👍
Glad you enjoyed it 😊👌👍
Hi Mick
That’s a great example of how blasting the steel from new keeps the rust and pitting at bay. The anodes do help but I’ve done them when they’ve had the anodes on but not blasted and they’re pitted to hell. Spend a little bit more in the beginning and have them blasted, cut corners on the anodes👍😂
Yeah definitely do it right from the get go and get the very best service life out of the steel 👌👍
Definitely, also only use International 2k paint. Believe me International is the best of the best. I’ve been using it for over 20 years and it outperforms anything else. I’m going back into tanks I blasted and painted 15-18 years ago and honestly they are like the day we did them. The tanks are submerged in raw sewage and attack by methane gas and the paint it’s literally untouched. And it’s the same product they use on ships and oil tankers etc.
@@pato54321 👌👍 I don't know about paints/coatings I just stick to blasting 😏😂
Top lad!
😊👌👍
Awesome video thanks Mick very much appreciated top job 🇬🇧🇺🇲🇺🇲🇺🇲🇺🇲 just going to see my lads🤑😎🤠
Oh have a nice time catching up and have a safe journey 👌👍
Instead of just flat gaskets. Have a machine shop grove your clamp and use o ring seal. That's going to save you a lot of grief. Love your channel.
That's a very nice idea thank you 😊👌👍
bravo ei merci pour la video pierrot de paris f
😊👌👍
Good job man ! I like your videos :) What equipment are you currently using?
Thankyou 😊👌👍 I use 425cfm compressor and a presure blasr pot 👌👍
Really enjoy watching your channel, but I do have one question about the boats. You do a great job on the sides of the boat but what about the bottom?
Wasn't on the job sheet 😊👌👍
Hey Mick,🫨another learning video for me,please let us know where did you get your aftercooler mate!
Need one too! 🍻🍻
After cooler is adapted from an oil cooler 😎 intercoolers don't work they arnt rated to the right psi so long as it's big enough for the cfm you plan on pumping any shape will do I opted for a deep profile so the serface area is slightly smaller 👍
What do them block things do that are all around boat and why dont you blast them.....
Was thinking as you were blasting how well the steel looked and hardly any mill scale...... Another top video mate 👍👍
Anodes.
Yeah they are supposed to give their electrons easier than the steel in theory leaving the steel intact 👌👍
I'm surprised they didn't use that shrink rap that they use on boats that go into long-term storage.
Could course more of an issue trapping water 🤔
Might be too late now but if the owner is 2 Packing the boat then all them Anodes are not needed down the side, only needed around the Prop and Rudder, like the Anode on the Skeg is a good place to put it and one each side of the swim near the Prop and a couple on the Rudder. If it has a bow thruster there is a Anode on the prop end to protect the metals in that area.
I understand how they work and the logic of them but I still wonder do they actually work. This boat is obviously convincing me they do but I've done a lot of boats before and see even pitting regardless if they have a lot or hardly any. I think good prep and a good service plan is the way to go personally saying that if I had a boat I would fit them for peace of mind they don't cost the earth and last a long time so why not 😏 I'm on the fence like I say I know the logic and understand why they use them but I'm less than convinced they actually do that much just from the amount of boats I've blasted over the years if I spotted a noticeable area near the anodes that was cleaner or less scaled then I would be more convinced normally if a boat is pitted its pitted in a uniform way 🤔 its 50 50 for me if the work or not haha
@@Mobileblaster The problem with putting on for piece of mind is , IF you 2pack it , when you weld / break the surface of the paint you introduce electrolysis into the area around the Anode. I agree it is a science but I spoke with boat surveyors over my career and this is what it led me to believe. Also I saw a guy re applying roofing felt to his Hull, and his Hull had not one bit of rust or corrosion. The felt acts as a electro insulation just like the 2pack.
@madmick6805 Yeah I've spoken with builders and surveyors they all say the same thing anodes work and should be used I'm not going to disagree because the science proves it should work I would like to see an area round the anodes be cleaner steel than say an area that not got them but that would be impossible as a fair test as coating thickness and water will very etc like if the shower empty port is on 1 side etc it would be impossible to do a fair test. I don't have much to do with paints/coating it's not something I enjoy doing I'm very limited with knowledge in that department. I would love to see a scientific experiment with the anodes tho 😏 it would take some time to film I would imagine 😂
@@madmick6805 I've only just clicked on mad mick the boat builder 😂👌👍 if anyone would know about building a boat or two you should know haha
@@Mobileblaster Mine is out in August, so we will see. I'll take some pictures before and after 👍
What is the reason for not blasting the prop?
I don't really know 😂 they don't get painted so I don't prep them
Definitely looks more interesting than blasting oil & gas pipes 😂
😊👌👍
call me stupid; but how do you blast the BOTTOM?
As you would expect try and get the boat a little higher and crawl under 👍
☝☝👍👍
😊👌👍
What about a engine head gasket cut to fit 🤔
I can buy the proper gaskets but they are too expensive for a tite arse like me 😂 they come as a kit and I don't need all the other stuff they come with 😬
Anodes is cheap , steel is expensive so it is a good investment 🙂
😅👌👍
Narrowboat.
Yeah long boat narrow boat house boat canal boat house boat I thought I would try this time for the algorithm 😂😎