Well done! Your attention to detail is truly something to behold. The twist tie trick is genius! This is AMSR for audio freaks! I learned something and I’m totally relaxed.😂
Schöne Arbeit. Was für tolle Boxen,da war JBL noch top Qualität. Allein dieser Hochton Schlitzstrahler,ein Traum von Seidenweichen und kristallklaren Höhen.Mit der beste,wenn nicht der beste Hochtöner,als NR.2405 damals benannt.Leider kaum noch zu bekommen.
My absolute favorite after 4345. They came out really good looking. They will make any room look better. Love your work and skills and i find it relaxing to watch. You more than deserve to get to 10k+ sub and alot more. See you next time Q.
A First Class Restoration. These Classic Speakers Will last a lifetime. One question, Are these both Left or Right handed? Brilliant job well done, Thanks for the Video.
I've seen some hacks but you sir are the king of all hacks .it's a shame they give you such nice speaker's to hack on ,to your credit JBL does make it hard on amateurs
La tapa frontal la hubiera sacado completa y luego pegar con adhesivo de poliuretano, por fuera sobre la fisura es solo superficial... los clavos con el con la resonancia se aflojan. Es solo mi opinión, igualmente buen trabajo😊
Nice job, I did my L-26 a few years ago and they look great. A couple of things though: the video could have been cut down to 30 min without losing anything. The banner on the bottom about subscribing is really annoying. Paying lots of $$ for walnut then painting it is a waste, I would have tried to convince the owner to use a good clear finish instead.
Wood glue from Home Depot with 2x4 stud. Just get something to fill that. It doesn't matter what type of wood. You can save sawdust when you cut any types of wood
There is glass on the upper part of the box, the switch must be removed and examined, it is not difficult to make a grid with canvas, the potentiometers are removed, etc.
The owner got the glasses. I cleaned the potentiometer with the Deoxit F5 from the back of the cabinet. I don't want to mesh with the original labels cause it will bend and the line mark when they remove that's why I just leave it like that.
At the beginning the video showed a small opening (like from a saw) on one side panel. I am guessing it was filled before the installation of the veneer overlays. But your video makes no reference to it.
Sorry, I can't make very details while I'm working and video. Take a lot of time on those. But everything was filled and flat before I applied the veneer..
@@QAudio а что тебе смешно? ты вед ничего не понял, тебе гугл перевел, что написал подпрыгивающий папуас. Запомни ЧВК "ВАГНЕР" не террористы!!! а 19Werwolf53 фашистский волк из партизан, даже его имя говорит об этом, Проверь мои слова в интернете. А...твоя реставрация....замазка говном, хороших колонок.
Well done! Your attention to detail is truly something to behold. The twist tie trick is genius! This is AMSR for audio freaks! I learned something and I’m totally relaxed.😂
😆😆😆 thank you
Schöne Arbeit. Was für tolle Boxen,da war JBL noch top Qualität. Allein dieser Hochton Schlitzstrahler,ein Traum von Seidenweichen und kristallklaren Höhen.Mit der beste,wenn nicht der beste Hochtöner,als NR.2405 damals benannt.Leider kaum noch zu bekommen.
Thank you 😊
My absolute favorite after 4345. They came out really good looking. They will make any room look better. Love your work and skills and i find it relaxing to watch. You more than deserve to get to 10k+ sub and alot more. See you next time Q.
Glad you like them!
I wanted a pair of these SOOO BAD in the late 70's!!😢
How about now
😄
A First Class Restoration. These Classic Speakers Will last a lifetime. One question, Are these both Left or Right handed?
Brilliant job well done, Thanks for the Video.
They are left hand
Q that was a beautiful job restoring those JBL's !!! 👍👍👍
Thanks friend 😃
I've seen some hacks but you sir are the king of all hacks .it's a shame they give you such nice speaker's to hack on ,to your credit JBL does make it hard on amateurs
La tapa frontal la hubiera sacado completa y luego pegar con adhesivo de poliuretano, por fuera sobre la fisura es solo superficial... los clavos con el con la resonancia se aflojan. Es solo mi opinión, igualmente buen trabajo😊
i used screws, nails and glue, will be good for them.
Nice job, I did my L-26 a few years ago and they look great. A couple of things though: the video could have been cut down to 30 min without losing anything. The banner on the bottom about subscribing is really annoying. Paying lots of $$ for walnut then painting it is a waste, I would have tried to convince the owner to use a good clear finish instead.
GROS BISOUS BONJOUR DE LA FRANCE BIENVENUE JAIME VOS VIDEO JADORE VOS VIDEO CONTINUER MERCI ET A BIENTOT
🤩🤩🤩🤩🤩🤩🤩🤩😍😍😍😍😍🥰🥰🥰🥰
how much does the cone assembly cost of low frequency driver?
Awesome job man!
thank you 😀
At 11:00 is that glue and sawdust that you mix together to repair the back of speaker? Glue type and sawdust wood type? Thanks!!
Wood glue from Home Depot with 2x4 stud. Just get something to fill that. It doesn't matter what type of wood. You can save sawdust when you cut any types of wood
Great job were did you get the re-cone kit from
reconingspeakers.com/products-page/jbl-2235h-c8r2235-recone-kit/
nice work 👌
Thank you 😊
On the feet I would have used a biscuit or some other joinery to increase the glued area and hold better.
That's great
Amazing work 👍🏽
Thank you 😀
Question. What did you use in place of the old fiberglass?
a.co/d/b244Xmd
I used that
@@QAudio Thank you. I knew that fiberglass was “obsolete” in the speaker building world.
@@bikdav they are way better than original
What year was it factored? Nice job
sorry i have no idea with that
@@QAudio present you brazilian made speaker MOOBOX ua-cam.com/video/LDt_JO73rR8/v-deo.htmlsi=RgGT0xrFJIYY1gxc
Masterpiece.👍
Thank you 😊
Super job...
thank you
There is glass on the upper part of the box, the switch must be removed and examined, it is not difficult to make a grid with canvas, the potentiometers are removed, etc.
The owner got the glasses. I cleaned the potentiometer with the Deoxit F5 from the back of the cabinet. I don't want to mesh with the original labels cause it will bend and the line mark when they remove that's why I just leave it like that.
What about the Xover?The capacitors are good?
Yes, they are, it've been done by the last owner
Sweet!!!!👏🏾👏🏾👏🏾
thank you 😀
I also like Osmo 😊
At the beginning the video showed a small opening (like from a saw) on one side panel. I am guessing it was filled before the installation of the veneer overlays. But your video makes no reference to it.
Sorry, I can't make very details while I'm working and video. Take a lot of time on those. But everything was filled and flat before I applied the veneer..
You make a solid walnut base and then paint it black?
To match with front and back. But keep the side to match with veneer on cabinet side
You didn’t check the crossover circuitry for bad capacitors or replace any parts or clean the potentiometers.
Like on the description. The crossovers were done before, so I don't have to work on them..
Excellent work!
Thank you 😊
xưởng có ở VN ko chị ?
Không bạn ah.
Great job
Thank you 😊
I make upgraded crossovers for these speakers.
Drill pilot holes first! LOL
Old style 😁😄
No entiendo si la pantalla frontal está ya fracturada porque no la cambio . Eso no lo hubiera echo yo .
If only that. He should have changed wiring and at least gleaned inside the crossover box, regardless of what the customer had said, or paid.
It's a pity you didn't paint the radiators!?
Yea I didn't. 😃
9:06 jvc sk600 /2 ?
JVC JR-S201
@@QAudio i mean the jvc Speaker :)
@@Cupra317hp yes. They are sk600 II
@@QAudio nice one. Had then years ago. What do you do with them.
@Cupra317hp nothing just want to sell them with the receiver
But you didn’t sheke the crossover….
The crossovers have been done by someone before, so I don't need to work on them.
🇨🇵👍💯
Hätte man ja wenigstens mal nen vernünftigen Soundcheck machen können
Butchery. Put pure and simple.
Thank you
Такое впечатление, что L300, была во владении боевиков- террористов из ЧВК "ВАГНЕР" и по ней лупили кувалдой.
Нет, это сделали салоеды-вандалы ВСУ из страны 404
😆😆
@@QAudio а что тебе смешно? ты вед ничего не понял, тебе гугл перевел, что написал подпрыгивающий папуас. Запомни ЧВК "ВАГНЕР" не террористы!!! а 19Werwolf53 фашистский волк из партизан, даже его имя говорит об этом, Проверь мои слова в интернете. А...твоя реставрация....замазка говном, хороших колонок.
@@QAudio en.wikipedia.org/wiki/Werwolf
Sehr schlecht gearbeitet. Sehr schlecht.
Thank you 😊