How to Troubleshoot an atv that wont turn over
Вставка
- Опубліковано 7 лют 2025
- My mud pro has been having issues lately. I got stuck out in the trail once before. The issue is that when I press the start button, all I hear is click. The starter does not kick in.
I'll show you some simple steps on how to find the source of the problem.
Lots of people troubleshoot starter problems the hard way, using a set of jumper cables to run power from the battery directly to the starter motor. Your video shows the RIGHT way to troubleshoot a problem with the motor not turning over and is much simpler and faster. Trouble lights are a boon to any mechanic. Everyone needs one!
Awesome video on how to troubleshoot! Thanks for sharing! 😁
Awesome video 👍
I’ve got a 1998 Kodiak 400 that I got second hand, I got it started in the summer, and i even got it going good, but now that it’s winter, it doesn’t start at all and before it died completely it wouldn’t take choke whatsoever 🤞could really use some help
Hello. I'd be glad to help you resolve the problem. Did you check your gas to make sure there is no water in the gas? When you try to start it, does it sputter or try to kick over at all, or does it just crank over with noting else happening?
Thanks bout 2 try this now
I thought the bulb should have lit up just as bright on the output side of solenoid as it did inside when u hit the start button. One thing i noted, (i had ground problems) was the long bolt with numerous wires used for grounds where the starter bolts to the engine case. I did something similar and had to move them and seperate them. Just a thought for anyone that may have grounding issue
What if when start button is pushed I get No click? The battery is new and operating the lights; wench; and fan my dad rigged to a toggle switch.
I took the start button assembly apart and sprayed generously with electric cleaner. It has been working fine. The 4 wheeler just died and I get nothing from starter button. I can pull start it though.
Sounds like it's the stater relay/solenoid. I've seen this often. First check your ignition fuse to make sure it's good. Then take you multimeter and put the positive on the output side of the starter relay and negative to ground. You should see 12 volts when pushing the start button. If you see nothing it's a bad starter relay/solenoid.
@@canadianworkshop Where is the ignition fuse on a 2006 400 outlander? It turned over yesterday, trying to start, but today it does nothing ( no " click " either ). Lights still work . Cheers from Coboconk,Ontario!
Good job. Thanks for
love your videos. are you in toronto
Thank you very much. I am in Northern Ontario. About 7 hours north of Toronto.