How to change front springs / front coil springs on NISSAN QASHQAI 1 (J10) [TUTORIAL AUTODOC]

How to change front springs / front coil springs / front suspension springs on NISSAN QASHQAI 1 (J10) 1.6 Off-Road 12.2006-12.2013 [TUTORIAL AUTODOC]
Springs on NISSAN Qashqai / Qashqai+2 ((J10), J(J10)) (02.2007-12.2013) cars should be replaced, as a rule, according to one and the same procedure.
However, there can be slight differences due to specific features of the vehicle design.
🔝 Top brands that produce springs: KYB, LESJÖFORS, STARK, MONROE, RIDEX.
📲 Buying via app is always cheaper than on the website!
❱❱ Install the AutoDoc App - interstitials.onelink.me/1036...
🛒 On our website you will find a wide range of auto parts you are interested in: goo.gl/YZLRQq
Springs: goo.gl/WdFDxH
Springs for NISSAN QASHQAI 1: goo.gl/n7So8G
🔔 Subscribe to AUTODOC's channel and don't miss new videos on car parts replacement ➜ ua-cam.com/users/AutodocUk?s...
🛠️ The tools you need to replace front springs:
- combination spanner No. 21
- combination spanner No. 19
- drive socket No. 21
- drive socket No. 19
- drive socket No. 15
- drive socket No. 14
- copper grease
- wire brush
- WD-40 spray
- torque Wrench
- HEX bit No.H6
- wheel impact socket № 21
- hydraulic strut spring compressor
- ratchet wrench
Was this video helpful? Give it a thumbs-up and share it with your friends!
Have a look at other videos on our channel:
► NISSAN car repair tutorial - • NISSAN car repair tuto...
► NISSAN QASHQAI 1 car repair tutorial - • NISSAN QASHQAI 1 car r...
►How to replace rear springs / rear coil springs on NISSAN QASHQAI 1 (J10) - • How to change rear spr...
► How to replace front brake caliper on NISSAN QASHQAI 1 (J10) - • How to change front br...
Mobile Shop: m.autodoc.co.uk
📢 AutoDoc in social media:
Facebook: / autodoc.co.uk
Twitter: / autodoc_berlin
UA-cam: / autodocuk
Instagram: / autodoc_autoparts
#autodoc #autodoctutorial
Disclaimer:
This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements, that are a result of incorrect use or misinterpretation of the provided information. This video is for informational purposes only and does not guarantee achievement of a specific result. The user is personally liable for incorrect use of repair equipment, tools or car parts, in particular, when this use poses the risk of injury. AUTODOC strongly recommends being careful and adhering to the safety rules when doing any repair or replacement. Keep in mind that using low quality auto parts does not guarantee the proper level of road safety.
⚡ AUTODOC CLUB - club.autodoc.co.uk
Add your car to the AUTODOC CLUB garage and get personal recommendations on repair intervals - club.autodoc.co.uk/?to=/user/...
❱❱ Install the AUTODOC CLUB App - club.onelink.me/d2X8?pid=yout...

[@autodocuk]

⚠ Attention! The mistake was made in the video at 6:06 minutes. The tightening torque is 168 Nm, not 110 Nm. We are sorry for the inconvenience.

[@KeefeLoke]

Is it a must to change the coil springs when changing shock absorbers?

[@autodocuk]

Thank you for your feedback.Replacement of springs should be made only in case of wear.Best regards,Autodoc!

[@christophephilippe1481]

Mines creaking and grinding after being replaced.. any ideas?

[@autodocuk]

It’s difficult to advise anything based on the description, we recommend to contact the car service.

[@luigifiordalisi1933]

110Nm, 168Nm, 93 Nm,..non c'è un video dove il valore di serraggio sia identico e così per altri video. Dove prendete questi valori ? I manuali riportano valori diversi.

[@autodocuk]

Buingiorno. Grazie per il commento.Non esiste un video in cui il valore di serraggio sia identico . Anche i manuali danno valori diversi.

[@autodocuk]

🛠️ The tools you need to replace front springs:
- combination spanner No. 21
- combination spanner No. 19
- drive socket No. 21
- drive socket No. 19
- drive socket No. 15
- drive socket No. 14
- copper grease
- wire brush
- WD-40 spray
- torque Wrench
- HEX bit No.H6
- wheel impact socket № 21
- hydraulic strut spring compressor
- ratchet wrench