Good explanation man, I took out my car door and saw how the lock switch works, wired it and all good now. I didn't use the orange cables and wired the yellow ones to black as this seems to be the way the factory lock works
Lmao yeah well when you figure out how the colors are 1 in a 1000 different variations to do same thing... Ground is Ground +12v is 12v + You kinda figure it out in the grand scheme of things
I have same modul but it stopped to work on my both keys. Learning button clicks and wont accept any keys. I have put new battery in keys. What is a problem?
Please help, my car's original central lock is powered by the power window switch. How can I connect a universal keyless entry unit to the car? Peugeot 607 2004
i just found out looking at some other diagram that it can do both, in the Nr.1 diagram where you can ether hook up the yellow wire to +12v or minus thats what desides it, so in my case i need to hook the yellow wire to ground.
Trunk unit has got to be a electrical power cables won't work. It's either a 12v or Grounding. Box output has to match the input.. So + or - to the trunk. Relay can be used to switch
When I lock/unlock car with physical key, in drivers door, this kind of system cannot be the cause of something not working properly? For example, I try to unlock it with the key, it doesn't unlock all of my doors, only drivers... Could this system be faulty, or is this not in any kind connected to turning the key in the door?
Have same unit by LANBO, though 2023 model. Here looking for instructions, since just a wiring diagram w/ no function description. Note the "oops" resistor added across the top DIP chip. Not uncommon in a new design, even in production.
Thank you for useful information, but one of the most important feature is missing. I don't care if it draws 10 ampers when flashing but I really do care it it draws 5mA or 15mA while standby. Please change the scale while measuring for higher precision. Do the math if you park your car for 2 weeks = 336 hours. If the car's computer takes 20mAh and this device another 15mAh, we lose 1/4 of battery capacity. For an older battery you won't even be able to start the engine. And anyway the battery's life will be shortened.
@@furulevi The scope of your posting is to show various characteristics of this device. Adding a solar panel is another very complicated subject, but all decisions can be made if you contribute with correct measurements with your help, editing this video. I'm sure that way you will get more thumbs up.
Hi guys may may i ask how can i connect it to both functions button and remote trunk release do i have to use relay??? And how should i do that thanks in advance
hi !!! thansk for your videos. do you know, where are the (lock/unlock power doors) cables to connect this module in a 2010 mazda 3 2010 ? thanks again.
I was able to get it working in my 1993 Grand Cherokee. Thanks for the video. But I can only program a single transmitter. How do I program a second transmitter?
Hello Steven, i have a 1995 Grand Cherokee. Maybe you can give me some installation tips? Where did you put the box? Which lines in the vehicle did you connect Box to? Do I have to go to the switch in the driver's door or do the cables run under the dashboard? Maybe with your help I can save myself a lot of time and unnecessary work. Thanks in advance . Martin
No, not to the fuse box. At most 3 of these 13 wires could be connected there, and it's always better to connect outside the fuse box than inside it. Where you do connect the wires will depend on where you mount the control unit. I installed the unit alongside the control module for my car's original central locking system; that provided easy access to +12v, ground, and the lock trigger wires while protecting the keyless system with the same fuse. I extended the light-flashing leads (brown) to reach the hazard-light switch; you could connect to the turn-signal wires from the steering column instead. You'll probably have to tap into the horn circuit at the steering column. Don't connect the horn lead (pink) directly to the horn! Your horn may draw enough current to overload and burn out the keyless module. If your car has a power trunk release, you can connect the keyless trunk lead (blue) to the interior switch rather than run a new wire all the way to the trunk. I think you'd have to wire the window-rollup lead (green) to close relays which in turn would supply current to the window motors; wiring all the motors to the green lead would sacrifice independent control of the windows. A wiring diagram for your car will help a lot to identify the connections.
I thought the same with the blue and green wires. In my situation the blue and green don't operate the door actuators, the red and blue wires do... I have five wire actuators...
How to put the manual switch trigger on the driver door?for instance you are on the car and you to manually open or close the switch? Can you help me how to tap it to the central locking module
I have never seen a more precise way to show people what an automotive keyless entry system is composed of. It looks like he doesn't know shit; he has just learned to install and remove but doesn't know what each part does.
@@joanarodrigues4581 its very simple to do. Quer que eu explique em português ou en inglês Joana? Rsrs muito boa essa chave, é chinesa mas funciona muito bem, e ate é duravel, me cobraram 150 euros pela original, com 20, fiquei com uma chave mais legal q a original.
@@GuarujaBrazilGTASA-MP sim, também me disseram, mas o vendedor disse-me que podia ter de a programar... Eu vou mandar o mecânico instalar, mas para programar tinha de ir a outro sítio e não sei se eles programam este tipo de coisas... Mas eu vi muitos comentários a dizer que já vinha programada...
@@joanarodrigues4581 Joana, se tu pagar pra alguem fazer isso, não compensa, é bem simples instalar, e também codificar, ou programar, se for preciso, qual seria as tuas duvidas? Manja um pouco de elétrica? Eu mesmo instalei o meu, e meu parca viu, quis TB, hahaha, já instalei em 3 carros, e não tive nenhum problema.
Thanks for the post . What Battery does that Fob use . I got a LB-402 same fob no batteries and no battery # supplied. Any help would be appreciated thank you.
@Furulevi hey i just connected mine today and i didnt get it to work it was on a 1999 wrx imprezza. i put the 12V Red wire onto a power source in the car. Both yellows with the 12V since they are power also. then the white and white/black onto the central locking unit for open/close on the car. and black grounded on the car. it shows the blue light making noises when i click the remote but the doors dont open or lock. I havn't connected the brown wire to the idicators though if thats what matters and i also havnt set up the remote with that button on the unit that button you hold in so i dunno if thats the problem
can you remove the chip inside the key fob and put it in another one? i wont be using one of the buttons, so would it be good to transfer it to a 2-button fob replacement?
@@furulevi its alright.... I think i might end up buying some keys and see if i can get them reprogrammed as long as they work with the right frequency
Salut! Ai reușit sa montezi închiderea? Am achiziționat și eu una asemănătoare, dar nu am reușit sa o montez.. mașină mea având deja un sistem de închidere, dar fără telecomanda, m-ai putea ajuta cu câteva informații? Îți mulțumesc!
Good explanation man, I took out my car door and saw how the lock switch works, wired it and all good now. I didn't use the orange cables and wired the yellow ones to black as this seems to be the way the factory lock works
I haven't installed mine yet ;))
Hi.. did you notice that the alarm did not have a doors switch detected?
How to do, make it work..
@@mdtech7606 it has been 5 years. Not sure
Please email me to ven.limpakan@gmail.com thanks you.
I bought a similar keyless entry. The instructions in mine were terrible. With the close up of your diagrams I was able to get mine installed. Thanks.
Great video if you wanna learn how to connect it on top of a desk and NOT in your car!
Lmao yeah well when you figure out how the colors are 1 in a 1000 different variations to do same thing...
Ground is Ground
+12v is 12v +
You kinda figure it out in the grand scheme of things
i had it installed for 2 years now, no more key to unlock :)
What happens when the close button is kept pressed say for more than 5 seconds? Does it close the relay for the entire time or just sends a pulse?
Very helpful. Now I understand the system. Thank you.
I have same modul but it stopped to work on my both keys. Learning button clicks and wont accept any keys. I have put new battery in keys. What is a problem?
Please help, my car's original central lock is powered by the power window switch. How can I connect a universal keyless entry unit to the car?
Peugeot 607 2004
Nice review.. 👍👍👍
Bravo pour les explications du fonctionnement juste savoir sur quel partie qu'il faut la brancher
this kit can give a negative trigger and positive trigger right?
I'm not sure...
i just found out looking at some other diagram that it can do both, in the Nr.1 diagram where you can ether hook up the yellow wire to +12v or minus thats what desides it, so in my case i need to hook the yellow wire to ground.
Does anyone know how to make trunk lock work.
Trunk unit has got to be a electrical power cables won't work.
It's either a 12v or Grounding.
Box output has to match the input..
So + or - to the trunk.
Relay can be used to switch
is this an alarme ??
When I lock/unlock car with physical key, in drivers door, this kind of system cannot be the cause of something not working properly?
For example, I try to unlock it with the key, it doesn't unlock all of my doors, only drivers... Could this system be faulty, or is this not in any kind connected to turning the key in the door?
Nice video, it inspires me how to test it by myself
Need to know how to get my other remote working, one is working fine
I love your video
Cómo se reprograma los controles? Se han desprogramado. Ayuda
how do you PAIR or repair remotes or new remotes to this?
Press the learning button on the main unit for 3 seconds then press button on remote within 10 seconds.
Have same unit by LANBO, though 2023 model. Here looking for instructions, since just a wiring diagram w/ no function description. Note the "oops" resistor added across the top DIP chip. Not uncommon in a new design, even in production.
Thank you for useful information, but one of the most important feature is missing. I don't care if it draws 10 ampers when flashing but I really do care it it draws 5mA or 15mA while standby. Please change the scale while measuring for higher precision. Do the math if you park your car for 2 weeks = 336 hours. If the car's computer takes 20mAh and this device another 15mAh, we lose 1/4 of battery capacity. For an older battery you won't even be able to start the engine. And anyway the battery's life will be shortened.
This gadget requires power... Add a solar panel to the car battery :)
@@furulevi The scope of your posting is to show various characteristics of this device. Adding a solar panel is another very complicated subject, but all decisions can be made if you contribute with correct measurements with your help, editing this video. I'm sure that way you will get more thumbs up.
@@furulevi 🤣🤣🤣
Hi guys may may i ask how can i connect it to both functions button and remote trunk release do i have to use relay??? And how should i do that thanks in advance
I'm not sure, I haven't installed it...
@@furulevi Hmm do you have any idea about it? If it requires relay a connection like this one? :/ Sorry for been truble for you
hi !!!
thansk for your videos.
do you know, where are the (lock/unlock power doors) cables to connect this module in a 2010 mazda 3 2010 ?
thanks again.
I was able to get it working in my 1993 Grand Cherokee. Thanks for the video. But I can only program a single transmitter. How do I program a second transmitter?
I'm not sure, I still didn't installed this into a car.
there is usually a button on the box (M) labled and you hold that and the button to unlock on the remote so they cloud learn each code
Hello Steven, i have a 1995 Grand Cherokee. Maybe you can give me some installation tips? Where did you put the box? Which lines in the vehicle did you connect Box to?
Do I have to go to the switch in the driver's door or do the cables run under the dashboard? Maybe with your help I can save myself a lot of time and unnecessary work.
Thanks in advance .
Martin
so where to connect these wires? in the fuse box? and where on the fuse box?
it's not that simple... I haven't mounted mine yet :)
No, not to the fuse box. At most 3 of these 13 wires could be connected there, and it's always better to connect outside the fuse box than inside it.
Where you do connect the wires will depend on where you mount the control unit. I installed the unit alongside the control module for my car's original central locking system; that provided easy access to +12v, ground, and the lock trigger wires while protecting the keyless system with the same fuse. I extended the light-flashing leads (brown) to reach the hazard-light switch; you could connect to the turn-signal wires from the steering column instead. You'll probably have to tap into the horn circuit at the steering column. Don't connect the horn lead (pink) directly to the horn! Your horn may draw enough current to overload and burn out the keyless module. If your car has a power trunk release, you can connect the keyless trunk lead (blue) to the interior switch rather than run a new wire all the way to the trunk. I think you'd have to wire the window-rollup lead (green) to close relays which in turn would supply current to the window motors; wiring all the motors to the green lead would sacrifice independent control of the windows. A wiring diagram for your car will help a lot to identify the connections.
Can you please check the functionality of blue and green wire, those wire for power windows and trunk release. For me those are not working.
I haven't mounted it on a car...
I thought the same with the blue and green wires. In my situation the blue and green don't operate the door actuators, the red and blue wires do... I have five wire actuators...
Thanks for very useful information
it`s a very good kit.,,easy install. installed on my toyota mr2 and my mercedes GD
mine somehow reloacks the car after some time when i run it, is it possible to stop it from relocking
How to put the manual switch trigger on the driver door?for instance you are on the car and you to manually open or close the switch? Can you help me how to tap it to the central locking module
I haven't installed this so I'm not sure what to tell.
Mine randomly stopped working. Does anyone know how to reset it
What exact problems does this remedy?
Maybe if the physical key is lost or damaged than this wireless system could lock and unlock the doors.
I have never seen a more precise way to show people what an automotive keyless entry system is composed of.
It looks like he doesn't know shit; he has just learned to install and remove but doesn't know what each part does.
I never installed it...
@@furulevi alright, brother; you are a very humble man; that's a very good human trait.
i have one of this working by 3 years in my farm truck.
Did you have to had it programed? I just ordered One online and I was confused about if the chip comes programed or if I need to program it...
@@joanarodrigues4581 its very simple to do.
Quer que eu explique em português ou en inglês Joana? Rsrs muito boa essa chave, é chinesa mas funciona muito bem, e ate é duravel, me cobraram 150 euros pela original, com 20, fiquei com uma chave mais legal q a original.
@@GuarujaBrazilGTASA-MP sim, também me disseram, mas o vendedor disse-me que podia ter de a programar... Eu vou mandar o mecânico instalar, mas para programar tinha de ir a outro sítio e não sei se eles programam este tipo de coisas... Mas eu vi muitos comentários a dizer que já vinha programada...
@@joanarodrigues4581 Joana, se tu pagar pra alguem fazer isso, não compensa, é bem simples instalar, e também codificar, ou programar, se for preciso, qual seria as tuas duvidas? Manja um pouco de elétrica? Eu mesmo instalei o meu, e meu parca viu, quis TB, hahaha, já instalei em 3 carros, e não tive nenhum problema.
@@GuarujaBrazilGTASA-MP a minha dúvida é só como codificar... Pelo que vi nas instruções não tinha como codificar...
Hey i want to ask could i connect trunk release to +? That to give 12v to my car trunk😊
I'm not sure, in the end I never installed this into a car.
A relay is needed to open the trunk, because it only has a transistor output which can be loaded up to 200 ma
Sir why manual trigger is disable when keyless is functioning?
any idea how to wire the close all windows function when you close car with fob? how to wire this in the car?
Not really... I haven't installed this yet into a car (I sold the old one and the new one already has this feature).
why alarm door trigger cannot work
Is there a video for people who have no idea how to wite??
i have installed this kit to my opel corsa c.. my question is how can i lock and unlock my car with the opel key but with not removing this kit?
I'm not sure, I haven't mounted this kit because I sold the old car that needed it and the new one already has it from the factory...
Thanks for the post . What Battery does that Fob use . I got a LB-402 same fob no batteries and no battery # supplied. Any help would be appreciated thank you.
I'm not sure, I never installed it, and there are no screws on the remote, so it probably uses plastic clips to hold it together.
VERRY GOOD EXPLICATION
works fine on my for fiesta 2003 thanks for your help
What kind of shop can I take my car too my windows and locks are Manuel too I need this done !!
My car when i press the remote but central locking not function but flash light is working. Check the power is good. What ia the problem?
I'm not sure what to tell, I haven't mounted mine yet.
I just wot to install it now
Who explain how to install it
Good video! i wish you could upload a video with a car alarm with vibration function one in the future, thanks
I haven't mounted this either, I replaced the car.
Can you tell me how to wire the cables with the colors? From the video you do not see I understand well ... Thank you
Whitch wires are for the lock & unlock only please i need this
Sorry, I haven't installed mine yet... I really should do it soon :/
how do you get the blue trunk wire to work?
@Furulevi hey i just connected mine today and i didnt get it to work it was on a 1999 wrx imprezza. i put the 12V Red wire onto a power source in the car.
Both yellows with the 12V since they are power also.
then the white and white/black onto the central locking unit for open/close on the car. and black grounded on the car. it shows the blue light making noises when i click the remote but the doors dont open or lock. I havn't connected the brown wire to the idicators though if thats what matters and i also havnt set up the remote with that button on the unit that button you hold in so i dunno if thats the problem
Sorry, but I haven't mounted my remote yet... I have another car now
i hav the same problem wondering it its not if the learning code
sir i havr a dord fiesta car that car will be senter locking system but it only unlocking not work lock its problen is what
Is this possible in a Suzuki alto 2003?
I'm not sure, I didn't installed this one.
can you remove the chip inside the key fob and put it in another one? i wont be using one of the buttons, so would it be good to transfer it to a 2-button fob replacement?
I'm not sure...
@@furulevi its alright.... I think i might end up buying some keys and see if i can get them reprogrammed as long as they work with the right frequency
Has anyone had any issues with this kit? Outside of my car I can lock the doors but the unlock only works when I'm inside the car.
NESTA INSTALAÇÃO PRECISA DE RELER
thanks bro nice video ..
Salut! Ai reușit sa montezi închiderea? Am achiziționat și eu una asemănătoare, dar nu am reușit sa o montez.. mașină mea având deja un sistem de închidere, dar fără telecomanda, m-ai putea ajuta cu câteva informații?
Îți mulțumesc!
inca nu am montat-o... ii brr afara ;)
Te inteleg :))
Pentru mine nu e o problema asta, doar ca nu stiu ce sa fac si speram ca m-ai putea ajuta tu..
Mi-ai putea da câteva informații cum sa o montez la motorașele din uși? Dacă mi-ai putea da un număr de contact ți-aș foarte recunoscător!!
Inca nu stiu cum sa-o montez... am uitat si ce am aratat in filmul asta si trebuie sa iau totul de la capatcea ce priveste studierea.
Am si eu una asemănătoare și nu mai functioneaza bine
Știți ce ar putea avea?
Price kai hain as ka
Ur the man thank you for the vid
I purchased one of these. I could not get it work :(I could not find a positiv cable on my car. I will try the battery may be......
From your key ignition :))
Sir price Kya h kit ka.
Please comment me
It looks like the video is playing on different speed??
Yes, it's edited, it is on 2x speed in the beginning.
Price
www.ebay.com/sch/i.html?_from=R40&_nkw=Car+Keyless+Entry+System&_sacat=0&rt=nc&LH_BIN=1
can some one please help where do i get this from?
www.ebay.com/sch/i.html?_from=R40&_sacat=0&_nkw=Car+Keyless+Entry+System&rt=nc&LH_BIN=1
Senter looking ki price
around 10$ ► www.ebay.com/sch/i.html?_from=R40&_nkw=Car+Keyless+Entry+System&LH_BIN=1&_sacat=75390&Features=Keyless%2520Entry&_dcat=75390&_sop=12
Könnte mir einer auf deutsch weiter helfen habe die auch
KeyLes start
phon no..sir i need this part
www.ebay.com/sch/i.html?_from=R40&_sacat=0&_nkw=Car+Keyless+Entry+System&rt=nc&LH_BIN=1
Be nice if you would talk.......
from 2:55 only :D
He did. You deaf?
ช่วยหน่อยครับซื้อมาต่อเองงงมากครับ
Find a local electronics or car parts store...
Talk
after I studied it I talked :)
Well done. But I lost interest due to the lack of talking.
talking starts from 2:55 :)
Absolutely ZERO chance I'm going to watch a video for 3 minutes without talking.
I would talk much sooner.