I have the same cover . Almost 3 years and still looks great. No rips or tears or fading. I got it for the same reason as you. Didn’t want to spend a lot on a leased truck.
Have the same cover on my tundra. Been having for a year, I live in south louisiana so it sees a lot of sun and rain, have not done anything special to it as far as care for it just wash it when i wash the truck and it’s holding up well. After having it on the truck for a little while in the heat I did have to adjust it and make it tighter as the heat helps stretch it a little.
Hi Brian, I bought the same 2021 Trail Edition, so really enjoy your mod videos. I bought the same Gator cover and installed today. When latching the cover down in grooves, did you have any problem getting the endcaps to fit between the rails? I went back and tightened the rails down to level them, but still not a 100% smooth latch. Got any suggestions I can try? Thanks, Clark
Hi Clark, congratulations on the new truck. If you are referring to the end caps on the rear ends of the cover, I did have to keep pushing them back in the first few times I latched it, after that, it seemed fine. Thanks for watching!
Only thing I don’t like about that is when you have your tail gate open you can’t use the step and I’m gonna say 98% of the time when I want to get in the bed of my truck is when I need my tail gate open. I rarely need to get in the back of my truck when my gate is closed.
@@PIPSBURGHVIEWS Thanks man, I love the channel. I just bought a 2021 Ford Ranger, so I'm looking for a cover that will get the job done without breaking the bank.
I am trying man, I used a pretty good camera for most of this video but the acoustics and back round noise in the shop are terrible. If you have any equipment suggestions, I am all ears.
Mike said Straight Pipe it. Did you straight pipe it? Just dont put an amg badge on it haha. Too many Pittsburgh guys running around with AMG and GTR badges on their civics. I dont know why, but it's an epidemic.
Bed cover review finally starts at 2:36 Good and thorough install video with tools needed and pricing. Thanks
Got to keep the sponsors happy, lol. Thanks for watching!
Good informative video thanks Bryan 👍🏻
Thanks for watching!
I have the same cover . Almost 3 years and still looks great. No rips or tears or fading. I got it for the same reason as you. Didn’t want to spend a lot on a leased truck.
Good to hear George, thanks!
I just purchased mine and installed it, hasn't rained yet but curious what all your thoughts are on being rain proof?
@@GatorCraze100 It's been through rain snow and pressure washer, no leaks!
Like to see how it does with this snow we have in Pa and how it’s holding up can’t wait for review I’m looking for a new one for my Titan
It had about 5 inches of snow on it yesterday, no issues yet.
Have the same cover on my tundra. Been having for a year, I live in south louisiana so it sees a lot of sun and rain, have not done anything special to it as far as care for it just wash it when i wash the truck and it’s holding up well. After having it on the truck for a little while in the heat I did have to adjust it and make it tighter as the heat helps stretch it a little.
Glad to hear that, thanks for the comment!
amzn.to/2LBP9ux
I like that cover. I want one for my 2013 f150
Nice video Brian, thnx.
Glad you enjoyed it!
Merry Christmas to you and your family. Can't wait for your next video
Thanks Randy, you too. I am working on something big right now, hopefully I will have it uploaded later tonight.
@@PIPSBURGHVIEWS sounds great 👍
Best bed cover install ive ever seen now im gonna get one
Thanks Jimmy, glad you liked it!!
Awesome video Brian!
Cool vid except for how do you install the rails they just magically are installed in this vid
If you have the track system the brackets just slide it there.
Good job Brian!
Thanks for watching!
Good review! Question: all these mods on a leased truck?? Tires , wheels, lift kit, exhaust??
Thanks! I plan to remove all the mods and sell them when I turn it back in.
Does water leak into the bed with this one?
For the 8 months I had it installed, it did not leak.
Can’t beat that for the price. I have a backflip x4 and sometimes question if I made a big mistake on spending that much on it vs one of these.
It was the cheapest one I could find, I like it so far.
Hi Brian, I bought the same 2021 Trail Edition, so really enjoy your mod videos. I bought the same Gator cover and installed today. When latching the cover down in grooves, did you have any problem getting the endcaps to fit between
the rails? I went back and tightened the rails down to level them, but still not a 100% smooth latch. Got any suggestions I can try? Thanks, Clark
Hi Clark, congratulations on the new truck. If you are referring to the end caps on the rear ends of the cover, I did have to keep pushing them back in the first few times I latched it, after that, it seemed fine. Thanks for watching!
Great video! Do you know what exhaust your getting yet?
Thanks, I do but its on backorder till next month.
Only thing I don’t like about that is when you have your tail gate open you can’t use the step and I’m gonna say 98% of the time when I want to get in the bed of my truck is when I need my tail gate open. I rarely need to get in the back of my truck when my gate is closed.
I agree, its definitely more useful on an SUV or van.
Nice tonneau cover Brian. Is that Escape in the driveway yours too?
Thanks, the Escape belongs to my mother in law.
Hey Brian can you tell Mike to wait for his new f150. He just uploaded a video saying that he might have to get a dodge or chevrolet.
I saw that, hopefully it will come in time.
That step will also keep Karen's Subaru from bumping into you at the store.
😂 😂 😂
Hi Brian! Is there any wind noise from the cover at highway speeds?
Nope, thanks for watching!
@@PIPSBURGHVIEWS Thanks man, I love the channel. I just bought a 2021 Ford Ranger, so I'm looking for a cover that will get the job done without breaking the bank.
@@JOHNXX1975 you can’t beat them for the price, thanks for the support!
Please invest in decent camera and sound equipment!
I am trying man, I used a pretty good camera for most of this video but the acoustics and back round noise in the shop are terrible. If you have any equipment suggestions, I am all ears.
Mike said Straight Pipe it. Did you straight pipe it? Just dont put an amg badge on it haha. Too many Pittsburgh guys running around with AMG and GTR badges on their civics. I dont know why, but it's an epidemic.
The exhaust I want is on back order till the middle of next month. I figure since BMW and Toyota are in cahoots now, I can put M badges on it!
What is the basic price of this cover?
I paid $211
@@PIPSBURGHVIEWS thats a good price. Keep up the videos. I always watch 👍
Thanks for the support Randy, I really appreciate it!!
Your buddy Mike has gone lame. Not much content from him. Starting to wonder what's up. Hope his wifey ($) is doing well.
I haven’t seen him since I bought my Tundra just a few texts here and there. It’s been a weird year for automotive YouTubing.
OK came for the tonneau vid and got fkn hitch step. Do better
@@Dirtdogdone …….. I have actually done worse
@@PIPSBURGHVIEWS lol