6.1L Stroker Cummins Dyno Runs | Power Driven Diesel
Вставка
- Опубліковано 6 жов 2024
- In this episode, Will, Myer and the rest of the crew at Power Driven install the new 12V Cummins engine into Papa Saurus, the 1996 Dodge Ram 2500 4x4 street truck. The video is capped off with some dyno pulls!
Find the best parts for your high-mileage Cummins here: powerdrivendie...
Power Driven Diesel is a specialty performance shop engaged in the engineering and development of high performance turbo diesel technologies.
1 435 962 9555
powerdrivendie...
/ powerdrivendiesel
All that camera flipping and rolling around made me feel like I ate some bad tacos too
Came here to say this.
Would be nice if your camera guy could figure out how to hold his camera still
Yeah, its not a porn flick. Its educational
he acts like its a damn call of duty montage
Love your videos guys! Could you speak to the camera folks though... Little Motion sickness going on with the camera movement.
Dear lawd, I think I'm gonna be sicker than Will...
I agree, trying to be cinematic. It’s a great technique, just not every single transition.... Props for trying 🤷🏻♂️
Thanks for the vids but please cut out that artsy sh#t with camera
Woooo got dizzy had to turn it off but man stoked u got it rippin again!
Did anyone manage to actually watch the sweeping camera shots without feeling a bit nausous? Made me wanna slap the cameraman......
Funny that 400k is considered "cherry". Mine is less than 200k, 1998.4, long bed, stick shift 12v. Not a dent on the truck because the PO didn't use it as a farm truck or work vehicle. The driver seat isn't even ripped.
When I first glanced at the video I thought I saw PAPA PRIUS 😅
I think I like that name better
Me too
Papasaurus, Awesome Name for the truck
Why do I feel like I've spent 15 Min on the 'tilt o whirl', Oh maybe THAT'S why you were so sick! LOL
Awesome video Will you have had some real bad luck but hang in there it's going to be a great summer 😀
God bless you and stay safe 🙋♂️🇬🇧
i can’t wait to see the pulls with new pump. very cool
air setup. 👍
Had the rack hang on my off the trailer pass. Did 6.62 @ 105 and kept pulling. Air and fuel shutoff did their jobs but man that’s a scary feeling on the track
Its going to make all the horse power!
@1:55 Jesus I feel like I ate some bad tacos or something. hahaha
Awesome video guys ! What a great team !!
I wish you all the best for UCC 💪🏻🤞🏻
No more weird camera shit
I would suggest adding a ball valve beside the seat so you can turn the fuel off as well. Sometimes an air kill won’t do the job especially if you were to pop an interstage or blow a compressor wheel on a twin setup it can still scream on what is left.
Great idea!!! Will is definitely going to add a fuel kill in both of his trucks!
@@pddofficial and a turbo oil cutoff
9:32 Todd in the back ground is me when i hear a cummins down the street! lol
Myer putting that single life forearm to work!
Wow looking forward to the next video keep up the good work guys
Will Terry the narrator giving Morgan Freeman a run for the money, lol. I'm guessing at full power on fuel only should hit 1350 with that charger set up and a 13 mm pump. Keep at it and hopefully learn from the failure to prevent it in the future.
I think Josh from UA-cam spilled the beans. Ill watch anyway lol
excellent episode!!!
Good lord enough with the camera theatrics
Todd at the shop at 2am wow! I guess race truck > sleep lol.
Awesome video !!
Yeah stop flipping cam bro I got sick AF trying to make it though that’s a no go.
I love the channel, I love following the progress on the trucks and everything y'all do. Not hating but the motion picture just about makes it hard to watch
Really love your guys talent, but the video really made me ill. I thought I was gonna puke.
Good morning fellas
12 valve right out the box I would say around 1036 horsepower
What size injectors did it have? 11blade or 13 blade g-trim? For most applications I like the 13's they drive the compressor a little better.
2:58 I'm tapping out, I can't handle the camera moving around this much.
Hell yeah
That engine hoist jack is probably low on oil, therefore it doesn't move as quickly as it should. I know Harbor Freight's jacks come low on oil.
but if its full of oil how they couldnt spend 5 minutes screwing up a great video
Do you not have a fuel shut off pull cord or something on the truck? Way to have a positive attitude! Great truck!
It will now have a manual shut off but it did not at this time
Hold the damn camera still
Papa Saurus a fuckin beast 😂
I think I have motion sickness
1st video I've watched that made me physically dizzy, the editing was the most frustrating part of the video.
Can you explain the concept behind having a lot less boost than drive pressure meaning you have more room to add fuel a little more?
I want to build my 5.9 to the 6.4
Really bad camera work. Can't figure out what's going on.
nice
1750 HP Don't let me down! Lol
600 send it!
Very impressive FN awesome
Sorry guys but that crap with the camera is completely unwatchable!
That was actually some sick editing, I liked it a lot
Can you explain the hot retorque a bit. ARP says they don't recommend a retorque anymore but if you do, do it cold. I did a cold retorque on my last HG install. My thought was if the motor is hot, everything is expanded. If you retorque cold then the expansion when it warms up would only increase clamping force? Or are you running so close to the edge of the head studs, you are worried about that extra expansion?
Although ARP does not recommend a retorque (for fear of fastener failure, yield strength problems, etc) the longer you play with bigger power setups, the more head gasket failures you'll experience from lack of hot retorques. They are essential for proper fire ring crush... and yes, it is hard on the fasteners to do multiple hot retorques.
So I was close but if things went right my guess was way off, so....
Are you TRYING to give people motion sickness? Whoever shot the footage for this vid should be barred from touching a camera again!!
What happened to the Junker? From what I remember it had pretty similar setup.
It's still running and driving. It will be on the dyno soon, but not till we get through UCC Season (Ultimate Callout Challenge 2021).
Once or twice with the rolling transitions is fine... But over and over again is a good way to get people to not watch the video. Hope your camera guy/edited is seeing this comment and the others. Made me dizzy. Love your content, this one was annoying. Not sure how whoever edited this was able to make it through without puking. Love what you guys did to the truck and all the details and the build. Just not loving the camera/edit work.
What cam u are running?
Anybody else now dizzy as fuck
Honestly the way he shot the engine install with the camera swooping around was annoying as #@%!
Agreed, that's not the way to add dramatic effect, I felt drunk lol
Just can't watch it... want to... but can't... camera... moving...
That camera work at the beginning made me nauseous
976hp
450 hp
1290 fuel only 1550 with nitrous
860HP is my guess.
Go to junkyard digs utube channel and use there link to get yourself a electric cyst lift for your hoist.
then we can watch someone push the button 500 times in loop video with the cameraman jumping all over
Cat fuel filter?
Yes, we were running a huge 2 micron CAT fuel filter to ensure the cleanest fuel possible, but it didn't matter!
I say 778 fuel only!
1,300 hp
1:23 😂😂😂😂
975 HP yea come on 1250tq
What engine mounts do you guys run?
PapaSaurus still has factory engine mounts, it could definitely use some upgraded poly mounts!
634-1100
850
603hp
I think it'll make 700hp
1380 is my guess.
1500
Tell your camera man to relax a little with all the moving around
Issue should be fixed over the last year!
650hp
#first
2nd... you were beat by CumminsWorks 1 minute ago.... LOL
663 hp
Horsepowers = 836
936 hp...
Camera man drunk?
That camera flopping is aggravating. Felt like my face was getting dunked under water. Please no more videos like that again. I genuinely like the technical points of your videos.
685
1,450
I’m guessing about 1000 hp this is the first time I have seen this video
I wish I had seen the build videos I would have put my number higher
You guys do need to steady your camera guy.
I live in Indiana where can I find a good roller I have a complete drive train the metal is scrap I want a toy to play on the street with
I'm sayin at lest 880
916
627
Video made me feel like had bad 🌮 🤢
Can’t hang a rack on a common rail...........
just injectors
thinking 640 hp
Close for the low power break-in run... it has so much more potential!!!
good power truck some day mine will be @ there 🤣 live in Aruba need to order everything ✌🏻 only under 10 trucks in Aruba 2nd Gen
Camera work was just awful in this video.
Never do that goofy camera swooping stuff again 🤮
THIS VIDEO IS ANNOYING AS ALL HELL
nice
680hp
Damn I was close!!
#first
835