Your video was awesome man- as a diy guy for years I’ve watched hundreds of videos and your is in the top 1 percent- audio, video, knowledge, and pacing - thank you!
I could be wrong but I believe the spring part of the top and bottom clips should be towards the front and not the rear. That's how mine were from the factory and it looks that way at about 2:23 in your video.
Great video. I wonder why one pin has the rubber sleeve and groove. One of mine swelled up and it was almost impossible for me to get the pin out. When I got it out it was all deteriorated. I ran to Autozone to get a replacement kit. Thankfully only $7 for 2 rubber sleeves and 4 rubber replacement boots.
Thank you. Lucky you. My local parts store usually sells the hole caliper only. Those sleeves are supposed to take care of rattle noise coming from the brakes. Many remove them and go without.
THERE IS A MISTAKE IN THE VIDEO
Watch correction right here:
ua-cam.com/video/T8oTJw1HT7s/v-deo.html
You're like the only one in the whole Internet, who shows the pin placement. The pin with the rubber piece.
🤗
I have never seen such a detailed well explained job covering every detail of the whole process. A real teacher!
Thank you. Maybe I should change profession 🤷♂️
Your video was awesome man- as a diy guy for years I’ve watched hundreds of videos and your is in the top 1 percent- audio, video, knowledge, and pacing - thank you!
That's very encouraging. Than you.
Just finished changing my rear brake pads. The inner pads were more challenging to install. Thanks again for the video.👍🏼
You also can't see as well when doing them eh
Great video! Great explanations and clear shots of the details that were important.
Thanks. I'm trying hard 💪
one of the best tutorials. Thank you!
That is so kind of you. Thank you very much
Perfect, easy demo on how to install
Thank you 😊
Very nice and precise, thanks for sharing your knowledge with us! Very much appreciated.
Thank you. My goal is to help.
I could be wrong but I believe the spring part of the top and bottom clips should be towards the front and not the rear. That's how mine were from the factory and it looks that way at about 2:23 in your video.
Thank you, you're right. I will try to fix that.
Thank you so much! 👌 excellent video.
Thank you for your kind words 😊
Thanks for your video. It's really great
Oh thank you.
Nice presentation and good tips along the way! Appreciate you!
Thanks 👍
Extremely detail video. Very very good
Thank you
Thank you great video I am looking forward to seeing more of your videos.
Thanks. Maybe I should put more focus on creating videos 🤷♂️
Excellent video! Where do you get the bulk brake cleaner and the pump dispenser?
My dispenser is garbage. I just get a bucket from a local auto parts store.
Kleen-Flo is the brand.
Stock NO. 323
Great video. I wonder why one pin has the rubber sleeve and groove. One of mine swelled up and it was almost impossible for me to get the pin out. When I got it out it was all deteriorated. I ran to Autozone to get a replacement kit. Thankfully only $7 for 2 rubber sleeves and 4 rubber replacement boots.
Thank you.
Lucky you. My local parts store usually sells the hole caliper only. Those sleeves are supposed to take care of rattle noise coming from the brakes. Many remove them and go without.
@@AutoTechWorld_DIY ah interesting. Thanks for the info.
GREAT VIDEO SIR!!!
THANK YOU
Thank you. Happy to hear some feed back.
Very very very good video, I do appreciate it.
Thanks a lot. Hope you have a great day
That was thorough. Thank you!
Glad it was helpful! Thanks for your comment.
Great video!
Positive feedback. Thank you. 😊
Thanks for the video. I have to remove my rear pads to see why I have a grove etched into the rotor.
Probably a little rock that got stuck between the pad and rotor? 🤷♂️
Well done sir! Thank you so much
Thumbs up for your video.
Thank you. Glad it helps
How do you know if you need to resurface/replace the disc?
You measure the thickness and run out and if it's off, you replace.
@@AutoTechWorld_DIYThanks! Great video
Nice job!
Thank you very much.
I use the same gloves
They are very good
Yes to that. Thanks for watching.
Thank you. ❤❤❤❤❤
Your welcome. Have fun doing the work. 💪
Amazing! Thank you so much!
Thank you. I'm glad if the video helped you.
0:55 which nuts?
The lug nuts holding the wheel.
Thank you!
Your welcome. God bless you 😉
Thank you
Your welcome 😉
Thank you!
You are welcome. Hope it helped you out.
Just add text to the part where you were incorrect about the clips! Thanks for the video but now I have to take off one of wheels and redo it.
I don't think it's that much of an issue. Also, I don't know if you can add text after the video is uploaded. Thanks for watching.
God bless you too !
Thanks
It’s funny whenever I start stuff like this the first three or four movements are great and then I get slowed down by something
Haha. You're not the only one.
If you fortunate enough what are you talking about
🤷♂️
*promo sm* ❗
👌