18V Makita Battery Case Assembly Guide | BL 1830
Вставка
- Опубліковано 18 жов 2021
- Custom MAKITA battery by watching this video. I bought this battery case from China, costs $10. It is 18V 6Ah battery case with PCB that have balancing feature. It isn't MAKITA original battery case, but it can power the MAKITA 18V tools. The total cost for this battery is $40.
Lithium-ion battery cell
- Brand model: LG INR18650HG2
- Standard capacity: 2800- 3000mAh
- Rated voltage: 3.6V
- Charging voltage: 4.2±0.05V
- Maximum continuous discharge current: 20A
- Discharge cut-off voltage: 2.5V
- Weight: Max.47.0g
- Size: Max.18.2×65.2 mm
- Charge and discharge times: 500 times
You can find this product bit.ly/3BM8pxK
I hope you find this video useful and enjoy it!
Furthermore, I am happy to receive feedback, suggestions to improve myself.
!!! I'm sorry for the mistake if I did in this video !!!
Thank you very much for your likes, comments, and subscription!
Have a nice day
Gear Show - Навчання та стиль
![Makita BL1860. Правильный аккумулятор на 18В, 6Ач своими руками. [4K]](http://i.ytimg.com/vi/HsEsdP5CKjY/mqdefault.jpg)
finally. there is a makita battery board with balancing out there. great.
I enjoy your videos very much and really like the various project you do. I had purchased similar kit few months ago and it being my first battery pack I was assembling, wish you made this video back then but I managed. I wish I had easier access to 18650 cells to make more!
Неплохой комплект для сборки. Пластины-контакты - классные, даже с метками, куда стоит точечной сваркой "бить".
You make it look so easy building them battery's brilliant 😀
Great job, thank you brother. You are so talented
Brilliant easy job. Thanks
Excellent work 👍👍👍 . Thanks for sharing
Your work is great and helpful
Nice job again. Thanks for sharing with us.
That was a lot better kit than the last one. Previous one didn't have balancing for the cells and that is a dangerous thing.
Well, if you pair cells with same internal resistance and same charge/discharge rate - Battery pack can work without balancing.
@@SnekSnack I had left one cell (10 cell version ofcource!) not connected with this older no balancing schematic and charger wouldnt complete charge! Took it apart again and after correcting mistake charger completed charge- so it seems charger somehow "sees" that battery cells are not equal even without checking every cell.
@@Tegelane5 In older version, there is not only + and -, but one connector that goes to middle of cells pack and monitor voltage of cells there. Maybe that´s why charger did "see" voltage difference. It´s not accurrate (you would need 5 connectors, not only 3), but it works. ua-cam.com/video/myfc3b59T5Q/v-deo.html&ab_channel=GearShow
Congratulations for the video 👍👏🤝
Отличная работа!
Very very thank you for your transfer knowledge.
Muito bom e prático! Agora montar bateria 18 v para adaptar nas ferramentas vai ser bem mais rápido. Gratidão!
Very good casing penganti baterai 18v
Very nice kit!
Nice work 👍
Лучший!!! Спасибо за видео!!!
Best person did best thing.
"LEGO" for you 😉Nice job! 🌹
Amazing how this guy so smart he can assemble Marita battery pack with no instructions. I bet when he visits different countries he doesn't need to ask for directions.
Комментарий в поддержку канала и ролика, а также труда мастера.
Elinize sağlık
Great videos! This is one of my favorite channels. Wouldn’t the model of this battery be BL1860B?
Great video Super
Love from nepal
Gerçekten kaliteli videolar çekiyorsun dostum beyeni ile izliyorum ve takip ediyorum
So true!!!
Good Regecable battery 🔋🔋🔋🔌🔌🔌🔌
good job in my country it is more expensive to build a battery. than to buy an original makita.
Another great vid, must admit I'd by a battery off you rather than straight from the China factories lol
belíssimo trabalho top estou montando as minhas baterias tbm
Makita Battery Charger Plays Mozart
That's the thing I really laughed
A word of advice to viewers of this. Whilst it is perfectly safe to use ex laptop batteries of 2.2Ah capacity in these, be aware that they often will NOT run more powerful devices such as cordless angle grinders and impact drills. The BMS puts a block on them as their open circuit voltage gets pulled too low under load ... I know because I have several of these.
However, it would appear that using ex Dyson and similar brushless devices that require high starting and run currents resolves the problem. So cannibalising two or three non operational, genuine, original batteries from ANY drill manufacturer may well provide sufficient working, but low on charge, 18650 cells to build one that works well.
Interestingly, ONLY my angle grinder and impact drills do not work with the batteries I've made from laptop cells. At LEAST six drills, some Makita, some generic but converted to run on LiIon batteries, ALL operate for quite some time on full load without problems. Just be careful of assuming they don't work when it may just be that the load current capability is just insufficient for some devices.
In future, I shall be trying to obtain heavy duty cells from the sources already mentioned.
How many Amps should cells have? I have bunch of cells lg3200Mah with max. continuous discharge current 10A, would this be suitable for power tools?
@@darkosvk if the individual cells are rated at 10A discharge that should be more than ample. Just remember:
1. Cells in parallel are cumulative for current
2. Cells in series are cumulative for volts, but NOT current
3. Series/parallel are cumulative for both
So ...
3 sets of 3 cells in series will give a total pack of nine cells i.e. 3S3P so if each cell is 10A capable then the pack wiuld be a 12.6v (fully charged) at 3x10A or 12.6v 30A capable. This SHOULD be ample for all power tools including angle grinders and other high current demanding devices (most brushless motor devices seem to occupy this camp).
Finally: DO NOT UNDER ANY CIRCUMSTANCES MIX CELLS OF DIFFERENT MAX CURRENT RATINGS! That's the most sure fire way of causing overheating and potential fires.
@@boblewis5558 Great explanation Bob and what combination would be in this particular battery case where we have 10 cells....5p2s? Does it mean than 50A?
@@darkosvk basically, yes BUT it is easy to get carried away here as the compact size and tight space don't lend themselves to good cooling so you wiuld need to include some pretty accurate and fast over temperature cut out. to run that level full time. The cells will soon start ti warm up with a 600 watt plus heating capability going on. It might be wisest to drain no more than 25-30A and even then you should keep a close eye on the temperature and more importantly the temp slope i.e. how fast the temp is rising as LiIon cells get thermal runaway VERY quickly. I'd focus on the extra capacity Ah wise rather than continuous high running current. Don't forget commercial 18/21v power tool batteries of 5s2p are typically only 6Ah rated and to get to 9Ah they become 5s3p in Makita, Bosch, Dewalt style packs.
One thing these 12v packs are good for though is with a cheap eBay buck boost converter set for 21.5v output @0.5-1.0A to use as a recharge supply for those portable power tool batteries.
An 18v3Ah battery (54Wh) can be fully recharged several times without problem from a 12.6v 15.4Ah (194Wh) battery (less the conversion losses of the buck/boost) and means such power tool batteries, even 9Ah can be given a full or partial recharge when away from mains power. Highly useful, especially if you want to also recharge the 12v batteries from your car (Do NOT charge directly from the alternator). You just change the output of the buck/boost to 12.6v and connect the input of that to the car. I've used this method a lot as it means you can recharge batteries on the job away from the car and when the 12.6v battery runs low you can just recharge it from the car battery/alternatir, while carrying on with the job some distance away.
@@boblewis5558 Safety first and I agree. If you have to analyze this particular battery case, what do we deal with? Following manufacture guide and assemble this pack with 3200Mah 10A cells what do we get at the end and would it be safe?
Great video thank you .buying link is a taobao link .have export feature in taobao stores? Also only working in phone apllication right?
👍
Чем этот аккумулятор будет отличаться от оригинального аккумулятора makita?, будет ли он работать с оригинальным инструментом.может проведёте тесты этого и оригинального аккумулятора.
👌👌👍👍
👍😉
Isn't there a way to easily extract the cells to load into a charger like 1:18 minute? Thanks.
You make great videos. Keep up the good work. I want to rewind a car alternator so I can run it on 120 volts DC. Do you think it could work?
Bonjour, oui. C'est une question de tours, et de dimension du fil cuivre. Probablement que ça délivrera pas beaucoup d’ampères. Et si vous partirez, non pas d'un alternateur, mais d'un moteur 110volts, que vous utilisez en inverse (dynamo) avec probablement des engrenages réducteurs,,,,, Je sais pas... :D
ua-cam.com/video/SXD4Ggs2af0/v-deo.html
For what you not search in youtube ?? have many video,, but not look video of "free energy" is fack.
and first like
Hello, did you solder the battery after it was full charge? Should it be less 3.5v before soldering? I saw your edit shows you charge all batteries and then you assemble.
Charged all mine up yesterday with my fast oem charger
Hey is that funky home made light is based on my thingiverse design? If so that's neat :D
Stihl chain saw
please bro
Very good video thanks for sharing, it would be good if you indicate the link where to get the adapter but in English or Spanish. Thanks
eBay, Ali Express, possibly Banggood and others. Plenty of options and prices incl delivery.
Great info thank you . Can you send the link in English please ?
is there a dewalt 20v version?
Nice soldier fume hood. I like to see folks use those. Save your lungs and face.
我做这个电池的时候，最后装保护板的时候被我短路了。。保护板被击穿了 哈哈哈
but when i build that makita battery it was not chrging when i discharge it
Will I buy a Parkside enclosure? 20v?
👍👍👍👌👌👌
From where I can get the 18v battery kits for my Makita tools?
Hello, I have to change the rechargeable battery, of the BLACK & DECKER screwdriver, 12 V BATTERY TYPE N 2, Cd121k2. I would like to know if there is any video. Thank you
ua-cam.com/video/LRaltNPGBM0/v-deo.html
👏👏👏👍👍👍👏👏👏
💪👍🏻💪👍🏻💪👍🏻💪👍🏻
Где заказывал комплект,и батарейки?
Hello, there is any problem soldering with wires instead of spot soldering?
I ones melted positive side seal then i tried to solder. It started to squirt battery electrolyte... So don't ask how i know :D
It won't hold correctly and have more chances of getting dangerous or destroyed.
@@E-hab Yeah, i already said that. You can solder but it's pretty dangerous and lithium batteries doesn't like high heat. but why youtube doesn't show my first message? what ever.
You can see battery rebuild with soldering in my videos
Available online shopping site for this product
👍👍👍👍👍👍👍👍👍👍👍
BL1860?))
My like👍👍🤣
Sand the table and revarnish.
Hình như wên dán đầu cực dương r
Where can i buy the LG cells?
Can I get a heart from you
I wish I had a battery charger that sang to me
Hi 👋🏼
Can you convert a tineco a10 vacuum cleaner to 110v?
If you can make a step by step video I will make a donation.
hmmm..
Where to find this product please ? The link not available anymore ?
I bought it from China online store Taobao
And tester with capacity battery bro
Battery pack case cover total cost for this product and
From which country your are??
Класс✊✊✊✊✊✊✊✊✊✊
Καλά θά ήταν να ερχόταν καί Ελλάδα το προϊόν.
Shanu pandey
👍👉🔝
2 like
I sent you a message a few weeks ago. I asked where you got this material. Could you send me the link, please?
I assume aliexpress or shopee
why every 4 battery together ??
You mean every 2
@@E-hab but i see 4 not 2 so why in parallel not series ?
First view
I am 5 view 😂😂
2 view
Хорошо конечно что так можно но только явно не для России этот набор: сами элементы питания очень дороги. Я имею ввиду именно качественные высокотоковые элементы. У автора канала элементы питания производства LG в - "Чип и Дип" один стоит около тысячи, а их тут восемь штук. Так что смысл такой штуки мне не совсем ясен. Может я не понимаю чего то? Ну и аппарат точечной сварки тоже недёшев: даже на Aliexpress он стоит порядка четырнадцати тысяч (170 евро) и судя по отзывам плохого качества, а хороший аппарат стоит около ста двадцати тысяч (1455 евро) ну и смысл тогда? Оригинальный аккумулятор Makkita 18 вольтовый на 3 ампер часа на "Все инструменты" стоит порядка чытырёх тысяч рублей, с доставкой пусть будет четыре с половиной - зачем нужен этот набор? Чего я не понимаю?
Это скорей для тех, кто точно занимается строительством и имеет выбор: либо тратить огромные средства на аккумуляторный инструмент (для выездного монтажа, например), либо иметь всё вот это и самостоятельно собирать то, что нужно, какого нужно ампеража и ремонтировать самостоятельно, а не надеяться на гарантию с простоем или решением негарантийного случая, а так же с долгим поиском подходящих аккумуляторов.
Но такое проканает больше с Макита/Бош/Девольт. Для Метабовских аккумов не проканает (может быть только сама замена элементов питания, да и то не факт, что там не стоит счётчик зарядов/разрядов).
@@lightbatmen мне очень интересно как оригинальная Макита отреагирует на этот контроллер. На алике готовые аккумы смотрел, кто-то пишет, что работает с оригинальной, кто-то пишет, что не работает. Как докопаться до истины?
Интересная логика. Можно купить сварку и пользоваться ей раз в год для себя. Окупится ли она? Нет. А можно купить и оказывать сварочные услуги. Окупится ли она в таком случае? Несомненно. Этот человек ведёт довольно популярный канал, имеет кучу инструмента и я не удивлюсь, что часть из него он продаёт. Некоторые он наверняка берёт на ремонт за деньги. А теперь подумайте: нужны ли ему все эти аккумуляторы и аппарат точечной сварки? Электроотвертки и импакты? Лобзики?
@@user-pq9gk7bt4j То что автор канала зарабатывает на этом несомненно. Я имел ввиду частных мастеров и даже ремонтные мастерские - аппарат точечной сварки точно не окупается. Точнее время за которое он окупится превратит его в неребентабельное приобретение. Я как частный мастер постоянно работающий аккумуляторным инструментом не пойду в мастерскую чинить аккумулятор и сам этим заниматься не буду, я куплю новый, потому что так быстрее и дешевле. Но раз такой набор существует, значит на него есть спрос. Вывод напрашивается сам собой: это не для России.
Yes, the channel just became boring and monotonous. Previously, even though there was content about recovery, now it is always sticking the battery.
He should immediately refund all the money you paid him, plus interest and he should finally allow you to watch other UA-cam channels that provide the content you want to watch. The _nerve_ of him!
👍
👍