Hummer H2 Leveling Kit Install
Вставка
- Опубліковано 9 лип 2021
- Installing a 3” front & 2” rear leveling kit on a Hummer H2.
Please like, subscribe & share. Thank you :)
Leveling kit brand @supreme suspension
Where I purchased from www.ebay.com/itm/Fits-2003-20...
Note: shock brackets are only used when installing aftermarket shocks, otherwise you don’t need to use them if you’re using stocks
Instagram @ZJSVll
Man, my hummer was just fine until i saw this video. now im side eyeing it like, 'it could go up a few in the rear'. :P
Do it!
Hell yeah I immediately looked at mine like I gotta do something
Bad ass truck. And good video
Good Video.... I got the same supreme suspension 3” front & 2” rear levelling kit for my Hummer H2. I taught the shock mount has to be used due to the 3-inch lift..
Thank you. I thought so too but the instructions said it’s only used if you’re installing after market shocks. But I’m not to sure
@@zeusjimenez2937 weird they suggest to use the shackles only if you're using aftermarket, bilstein in this case are the same size than stock...p.s. I installed my rear spacer s as well, went with 27 inch shocks, although Amazon says it wont fit our H2 but they do. Just in case you want to upgrade your shocks
Bro that h2 is clean as f
Bad ass man she's gorgeous
😍😍😍👍👍👍lindo um belo carro
Did u crank the keys for the full 3" lift? Or how high did u go in the front ?
My rear isn’t dropping down as much as urs does a can barley get the spring out let alone the spacer In
Truck looks good what size wheels and tires you have on
Much appreciated! There 22x12’s with 35x12.50’s with 2” spacers
Nice vid bro...so no need to add larger rear shocks after the 2 inch spacers?? Stock shock would do the job?
Thanks bro! They'll do the job but I would upgrade them if possible rides harsh lol
I mean not the quality ride but the length of the stock shock, I might be confused by thinking if I add 2 inches I would need larger shocks. I was going to do 5100 bilstein on all corners but I don't know if the rear 5100 would be too large even with 2 inch spacer, the rear stock 4600 bilstein would be fine then I gues..
@@julianmartinez6825 Stock height would work but if you can go a bit bigger it will be better to be honest.
@@zeusjimenez2937 i got you, I'm gonna go with the 5100s if the are too large, I return them n get the 4600...thanks for the help🤘🏻
Couple questions here.
Will this work with Factory air ride
Do you need upper or lower control arm
Do you need Driveshaft Change
Can you fit shock absorber
Ps. Supreme suspension takes a long time to answer so hopefully you shed a light on this subject thank you.
Hey Bruce. I’m not sure on the air ride, it should work. You’re just putting a spacer on the rear springs, it shouldn’t affect the air ride . I have the factory a-arms and no you don’t need to change the driveshaft, my vehicle is completely stock. Also the kit I ordered came with shock brackets, But I didn’t install them. Im pretty sure you can fit shock absorbers. Hope this helped!
How’s the ride quality now with the lift ?
It’s a little rough but I think it’s because I have the oem shocks
Do u have 2 or 3 in blocks in the rear ?
2”
أحب الهمر
Did you go all 3 inches in the front
Yes but I wouldn’t recommend going all 3”, The ride quality goes down the drain.. maybe if you get aftermarket shocks it’ll feel better
Why not put the spacer on top of the spring so it is not seen?
I’m not sure if I’ll work like that because the spacer has a lip that goes around the axle
@@zeusjimenez2937 reason I stated that is when I had a leveling kit before I went with the 7inch kit, I put mine on top, that way you could not see the spacer, fit perfectly up there.
Was this 3” front 2” rear?
Yes, I’m able to fit 37” tires with negative offset wheels
What exhaust do you have?
Just a muffler delete
Does it still ride and handle the same
It’s a little bit more rough but some aftermarket shocks should fix that
Watudo