![ZEUS JIMENEZ](/img/default-banner.jpg)
- 6
- 30 082
ZEUS JIMENEZ
Приєднався 28 тра 2019
Hi, my name is Zeus. I’ll like to inform y’all that I’ll be posting videos on my builds that include a Hummer H2 , Polaris RZR Turbo S and a Polaris sportsman 1000XP. Please subscribe! Thank you!
Hummer H2 On 24x14 American Force Wheels Leveled On 38s
Hummer H2 on 24x14 American Force Octane Wheels with 38x13.50 Tires and a leveling kit
You’ll have to trim the inside of the fender well to make them fit :)
Thanks for watching
Instagram @ZJSVll
You’ll have to trim the inside of the fender well to make them fit :)
Thanks for watching
Instagram @ZJSVll
Переглядів: 4 636
Відео
Hummer H2 Leveling Kit Install
Переглядів 19 тис.2 роки тому
Installing a 3” front & 2” rear leveling kit on a Hummer H2. Please like, subscribe & share. Thank you :) Leveling kit brand @supreme suspension Where I purchased from www.ebay.com/itm/Fits-2003-2010-H2-Hummer-3-Front-2-Rear-Leveling-Lift-Kit-PRO-4WD-/130697419493?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0 Note: shock brackets are only used when installing aftermark...
How to wire headlight eyebrows to be daytime running lights Polaris RZR
Переглядів 1,8 тис.3 роки тому
This is how to make your eyebrows on your Polaris RZR stay on and act like daytime running lights, it’s a Quick and easy job. If you like the video please make sure to like and subscribe for more content! Instagram Zeusjimenez7 TikTok Zeus.408
Hummer H2 on 22x12 American Force Wheels with 2” spacers
Переглядів 4,3 тис.3 роки тому
2006 Hummer H2 Limited Edition Fusion Orange SUT on a set of 22x12 American Force Wheels wrapped in 35x12.50r22 Toyo tires Instagram @Zeusjimenez7 TikTok @Zeus.408 Make sure to like and subscribe. Thank you!
2021 Polaris RZR Turbo S (Quick Fix)
Переглядів 2143 роки тому
Here’s my 2021 Polaris RZR Turbo S. The dealer installed the bracket for the harnesses wrong so I fixed it, Just a quick turn around. Please subscribe and leave a like, For More RZR content. I hope you enjoyed! Instagram: Zeusjimenez7 TikTok: Zeus.408 Thanks!
Hummer H2 Gets A Quick Wash
Переглядів 4693 роки тому
This is my 2006 Hummer H2 Fusion Orange LE on some 22x12 American Force Wheels, getting a quick wash.
Did you lift it
Bro that h2 is clean as f
My rear isn’t dropping down as much as urs does a can barley get the spring out let alone the spacer In
How is the turning
Bad ass truck. And good video
Amazingly Gorgeous H-2. And Amazingly Gorgeous H-2 Black.
Did u crank the keys for the full 3" lift? Or how high did u go in the front ?
😍😍😍👍👍👍lindo um belo carro
Why not put the spacer on top of the spring so it is not seen?
I’m not sure if I’ll work like that because the spacer has a lip that goes around the axle
@@zeusjimenez2937 reason I stated that is when I had a leveling kit before I went with the 7inch kit, I put mine on top, that way you could not see the spacer, fit perfectly up there.
What is the offset of the wheels?
-73
Stock? Or lifted?
Front leveling kit
What kind did you use? And what does it cost? Thanks
I used supreme it’s 150$ on eBay. But I’m having some problems with it right now. I recently lifted the truck with a ranch 4” lift kit and with supreme keys. And the keys aren’t sitting right
Watudo
Did you have to replace the shocks and if so what kind ?
You don’t have to replace them but I heard people who have replaced them went with bilstein 5100’s
Nice vid bro...so no need to add larger rear shocks after the 2 inch spacers?? Stock shock would do the job?
Thanks bro! They'll do the job but I would upgrade them if possible rides harsh lol
I mean not the quality ride but the length of the stock shock, I might be confused by thinking if I add 2 inches I would need larger shocks. I was going to do 5100 bilstein on all corners but I don't know if the rear 5100 would be too large even with 2 inch spacer, the rear stock 4600 bilstein would be fine then I gues..
@@julianmartinez6825 Stock height would work but if you can go a bit bigger it will be better to be honest.
@@zeusjimenez2937 i got you, I'm gonna go with the 5100s if the are too large, I return them n get the 4600...thanks for the help🤘🏻
Any rubbing at full turn?
Yes but a leveling kit will fix it
أحب الهمر
Did you go all 3 inches in the front
Yes but I wouldn’t recommend going all 3”, The ride quality goes down the drain.. maybe if you get aftermarket shocks it’ll feel better
Bad ass man she's gorgeous
Sweeeeeeeet!!!!
Love it
Man, my hummer was just fine until i saw this video. now im side eyeing it like, 'it could go up a few in the rear'. :P
Do it!
Hell yeah I immediately looked at mine like I gotta do something
@0:22 She' clean.. Now lower the front a tad, add a 3rd roof rack, drop the mic and walk off stage !! :P
Lol, Thank you
Add the 3rd roof rack? That's how mines is and it does something to the symmetry of the vehicle.
que chulda😍
🔥👍🏾
Both H-2 are Gorgeous.Love them.Would not leave the garage.
How’s the ride quality now with the lift ?
It’s a little rough but I think it’s because I have the oem shocks
Do u have 2 or 3 in blocks in the rear ?
2”
What exhaust do you have?
Just a muffler delete
Couple questions here. Will this work with Factory air ride Do you need upper or lower control arm Do you need Driveshaft Change Can you fit shock absorber Ps. Supreme suspension takes a long time to answer so hopefully you shed a light on this subject thank you.
Hey Bruce. I’m not sure on the air ride, it should work. You’re just putting a spacer on the rear springs, it shouldn’t affect the air ride . I have the factory a-arms and no you don’t need to change the driveshaft, my vehicle is completely stock. Also the kit I ordered came with shock brackets, But I didn’t install them. Im pretty sure you can fit shock absorbers. Hope this helped!
Was this 3” front 2” rear?
Yes, I’m able to fit 37” tires with negative offset wheels
Good Video.... I got the same supreme suspension 3” front & 2” rear levelling kit for my Hummer H2. I taught the shock mount has to be used due to the 3-inch lift..
Thank you. I thought so too but the instructions said it’s only used if you’re installing after market shocks. But I’m not to sure
@@zeusjimenez2937 weird they suggest to use the shackles only if you're using aftermarket, bilstein in this case are the same size than stock...p.s. I installed my rear spacer s as well, went with 27 inch shocks, although Amazon says it wont fit our H2 but they do. Just in case you want to upgrade your shocks
Hey man it sounds sick what muffler you have on... im looking to one on just not sure ?????
Thanks brother. it’s just a muffler delete with stock cats
@@zeusjimenez2937 really i thought it would be to loud on the video it sounds good
Thanks bro it’s just a muffler delete with the stock cats. I like the way it sounds, I’m thinking of adding a x pipe with a axle dump so I can get a deeper tone
@@zeusjimenez2937 yeah i would like to see the upgrade video
Truck looks good what size wheels and tires you have on
Much appreciated! There 22x12’s with 35x12.50’s with 2” spacers
Does it still ride and handle the same
It’s a little bit more rough but some aftermarket shocks should fix that
HUMMER AASIF LIKED THIS VIDEO💪💪💪❤❤❤
Thank you!
Post more of the rzr love it!
Thank you!!!