How To INSTALL a Line Output Converter w/ Stock Radio & Speakers 4 Aftermarket SUB AMP Installation
Вставка
- Опубліковано 4 жов 2024
- Time to get busy installing some car audio goodies inside the Toyota Corolla, everyone!!! Today we'll show how to connect and hook up a stock radio to a powered NVX line output converter. The XFLOC2 (LOC) takes factory speaker outputs coming from your cars stereo system, and lowers the voltage to much safer levels for wiring RCA wires to aftermarket amplifiers. The (2 channel) rear speakers will provide all the signal needed to convert from high to low level RCA. That way adding an upgraded subwoofer and bass amplifier to a stock head unit can be an easy installation, and fully adjustable with this adapter connected! Thanks For Watching!!!
/ exocontralto
/ exocontralto
/ exocontralto
/ exocontralto
Link To NVX Line-Output Converter
amzn.to/2wjely9
Tools Used:
XPLOC Line Output Converter Box
16awg Speaker Wires
14awg Automotive Wires
Wire Strippers
Ratchet Crimping Tool
Soldering Gun or Wand Station
Solder & Heatshink
(OR - Butt Connectors & Tape)
Heat Gun
Flux Paste
8" Zip Ties
Socket Set
RCA Cables
Digital Multi-Meter
Music By: AudioBlocks & UA-cam Music Library
www.audioblocks...
Licensed under a Creative Commons Attribution license (creativecommon...)
Connecting More Sound Setups & BIG INSTALLS Soon!
Simple, Easy & Universal LOC Install & Tutorial!
EXOcontralto
Bassheads Unite 2019
Let's get the Toyota back in business as we SAVE UP for the BIG BUILD!!!
Thanks for watching, everyone!!! :)
EA sy you just do it.
Exocontralto you will be at slamology this year with LITTLE BLUE right?
Thank you for making this video EXO. I just came across a video where this guy ran his speaker wire straight into his amp RCA inputs. I was thinking OMG!
Props on the vid.., try a "clip" to hold back shrink tube.. Ptevents it from sliding down in your way... Also interested in those 6-1/2 your removing. Drop a line ... Habe A Great Day!
@@MadDragon75 some amps have high and low inputs. U could wire them straight to ur speakers.
This dude's energy 👍🏻🍺
I haven't even been able to get good into the 3-minute mark of the video before I have to say, a moment of silence for RadioShack
I only went once as a kid but now isn't adult I wish I could be there like every day 😂
I miss the real Radio Shack more and more every single day
love coming from school to see a new exo video makes a great day
Same
You got me back into car audio after almost 20 years out of it. I just installed one of those line out converters to connect to my 5 channel Skar audio amp.
Try 2 ch 2 ohm D class 2000 watts
Yo if u read this maybe u can help me out like u said i was out of car audio for 20 years lol these line output converters are new to me in my days we ran ours wires to the aftermarket hu..anyway i used this in my bro in laws car but when he drives his sub amp shuts off high amp stays on do i need to have the stock 6x9 rear speaker hooked up also? All i did was run the output converter directly to the stock speaker wires i didnt reconnect the 6x9 stock speakers could that be the issue with sub amp shutting off?
Solder Connections are a zero ohm connection, thats GOLD in the radio business.
Great video for beginners.. just think of how many new people this series will bring into the world... keep the videos coming!
Dude I lost your channel I used to watch you back in the day so glad you popped back up !!!!!!!! Your awesome exo !!!!
So happy to see you releasing videos again! I know it gets tough sometimes and life certainly gets "in the way". Hope you're all settled in your new place and ready to hunker down and release more vids! I have a bunch of brand new 6x9's if you want a set to install in that 'rolla, let me know if you're interested and what kind you want, I'll send em your way.
The final tape job looks good. .Keep up the good work.
Best video out so far. Showing exactly what people are looking for
Exo ur a kid with warm heart stay young at heart and joyful
He is🙏🏼
I am glad you are always up beat. Thanks for being you. Always a pleasure to watch your vids.
You can use a small piece of tape to hold heat shrink wrap in place while soldering, to avoid falling. Nice video.
here in 2021 still watching your videos
EXO.. Never disappoints!
Viene muy bien que te saque la señal directa del remoto a los amplificadores. Un saludo desde España, Zaragoza, Tauste
I've used this handy device on my scion xB and my Mercury. Mine has an optional volume knob; I used it on the xB but not the Merc, I just use the head unit to control the bass. Simplified things to do it that way. Either way, a good thing to use when you don't want to screw with stuff behind the dash just to find no RCA's, and once the volumes are adjusted the way you need them, (mine is also internally adjustable), works like a charm. Set it and forget it. Good vid, Exo.
Il love this guy he makes it look like a kids show lol
If you could do his way no one can
thank you so much for this video. i have been all over youtube trying to figure out what to do with this Loc and how to install!!
Man thanks alot, brilliant tutorial. My local stero guy, hook my loc to just one speaker, no bueno
That’s a good radio shack add promo if they were still open 😂
Some are still open ..but are a far cry of what they were.
@Charles H Geis IV I would have to see it to believe it
@WeAreWatching Yu 🤔🤔🤔
I made a passive version of this with 3 resistors, its fairly simple to diy. Been using it for 2-3 years and never had an issue. A proper LOC is going to be much better though
This channel is very good. Brazil in the area
some people just got it! this dude is one of them. excellent video 👍🏻
Great video! I took notes and I'm gonna install the LOC right now! I'll come back and comment once it's installed!🙌
Did you install it what do you wire the remote wire to?
@@KRYZMA23 Yep! Got it installed! I connected the remote wire to the amp!✌
So your amp stays powered on always or???
@@KRYZMA23 No! it only turns on when I turn the radio or car on!🤔
@@KRYZMA23 Go to 9:40 in this video where it says to connect the remote wire to the amplifier!👍
0:22 guess you could say it was one hell of a corolla-coaster ride! lol idk if anyone said this yet but the vids about a year old so I wouldn't be surprised lmao
I love the big build videos with the new truck and everything, or even little blue, but it’s nice to have just kind of random videos like this one to just see that EXO is still rockin.
Thanks man! Long time installer but this was the first time I've installed a converter!
Loved the video. Instructive, clear and no waffle. Wholesome to boot.
Exo I'm a big fan hate telling people things in text cuz it comes across rude but you should clean the paint of underneath your ground wire that way it doesn't create excess heat on your amplifier and a weak ground because the heat dissipates through the ground and the heat sink fins on the amp if the ground Cant ground through the paint it'll create excess heat in your amplifier just a helpful tip then once the ground is installed take some touch up paint and cover over top to prevent rust thanks for the vids you rock
love that griswald flannel
I love installing the convertor with the remote wire for factory radio installs for the subs.. I always hated a hot wire or using the toggle switch for it to cut the amp off..
I’ll stick to my lc2i way easier to hook up but exo knows what he doing
Man ... I feel you on breaking your neck in that trunk.
I had to get in my 2013 Corolla trunk a few times.
I could get in with no problems but, being a heavier guy ... getting out was a mess.
fold down the rear seat and just lay down from the inside?
Great to see that car again on the channel!
Thats the video I needed to see.Im installing a schooch line output converter in my car with an aftermarket radio.I have no room to run orca and rem from the radio to the rear speakers.Its an installation wire saver for me.
Look into better solder and flux. They make a WORLD of difference with the look of the joint and how long you’re down there. Also Hakko makes a good quality station that works amazing for a budget!!
Hey EXO! You are the dude! Congratulations! Very cool your video!
You are amazing and legend on system 👍👑💯👍🐱🐱👍🐱👍👍👑💯
I spiced my left front and right front cables from the head deck as my car has a factory amp and sub. If I used the rear speakers it would have been already amplified. Food for thought hehe.
You need to start on your new truck man can’t wait to see that
That's awesome bro I just did that to my work truck don't tell my boss and now I have a 1100 watts in there with a really really old impp from pioneer that's only 450 watts lol im hoping it don't blow lol so far so good
Thanks EXO luv your content keep up the good work my dude
Love your videos you made my day
most vehicles now have a factory amp.... would be sweet to show Audiosource's LC2 or LC7 installed (post factory amp). That being said, loved the video
Car audio fabrication has a video on that I believe.
This dude looks reaaaaaaal familiar for some reason.
I never could get them working right in the past!
Nice one bruce, glad you changed to the black zip ties in the end bru xx
Next video we will adjust the output gain for a clean signal
EXO, you're my hero
I've used those wasn't a big fan of them but it's a great idea for low budget
SORRY but if you have a stock intergrated system where your climate controls and computer is all in one and your sound system is amazing has speakers and tweeters out the ying yang ( AUDI S4) you kind of need to use a line out convertor if you want some subs and an amp or 2! But you get what you pay for... Buy a cheap 20 ebay model or spring the 60-100 and guaranteed no issues... SOMETIMES ITS NOT A BUDGET IDEA WHEN YOU HAVE TOP OF THE LINE ALREADY.. Just Saying
EXO, have you ever thinked about making an informational video about "what makes a subwoofer loud"?
Like, when you explain where you have to be careful when choosing a subwoofer, what it's the most important thing to look before buying a subwoofer?
I'm trying to learn more about subwoofers, as I watched videos for more than 10 years every day, but never learned something.
I couldn't find any video or topic on the internet forward this subject and I thought you're the one who could make a great job with that.
I'm not EXO by any means mor ia this a video how ever maybe I can enlighten you a little. Sound is nothimg but the movement of air. There is alot of technical stuff I'm about frequencies In which that air is moving. He will probably if he hasnt already shown one making those frequencies visible. But to answer your actual question of what makes a subwoofer loud is the frequency. Subwoofers hit a substantially lower frequency that can actually be felt through the vehicle and through other parts of your body other than just the ears. After adding a subwoofer it's no longer just hearing the music but actually feeling it with the rest of your body as well. I hope That helps and I didnt just fall victim to a troller. Also not trying to take anything away from exo either but I'll post another comment with a link to where a gentleman makes it to where you can see those sound frequencies with science.
Watch that video I'd bet money you wont be disappointed.
Tool box is looking sweet
Thanks exo I always learn something from your videos.
The videos I come to like, wouldn't expect anything less.😎👍
Most helpful video yet. Thank you sir
Very beautiful teaching, My questions are: 1. where did you attach the remote wire to, 2. where did you attach the brown ground wire to?
The remote wire( blue) goes too your amp for the aftermarket subwoorfers this is meant for, you would use this device too either get rca or remote if you dont have one wich most stock head units do not. The broun wire he didnt use in the video but basicly when he turned his car on he was checking if the red light would come on signaling it was on and working correctly this broun wire is only used when you dont get the red like or sound from the sepakers. In this case he didnt need too use it though.
@MrLotus
@@bassheadadam6543 at the same time, you can't switch off both the LOC and the amp, they would both stay on and is like it gonna drain the battery, don't you think so?
@@mrlotus8049 the blue remote wire coming from the line output converter is what tells the amp to turn on when the car is on and turn off when the car is off. No, neither the line output converter nor the amplifier would draw any power from the battery while the car is off unless there is an internal short circuit in either device.
Dude Thank you so much for this! I've been wanting to put better subs in my car since I fell for the beats car audio trick. I haven't been able to figure out what to do since I have to keep my cars stock head unit in because it also controls pretty much everything else. Thank you again for giving me a plan to shake my neighborhood to peices once again
Another great video man, you always make things so easy to follow. Not sure if you said it in the vid, but are you taking precautions against the feedback loop from sub-woofers to rear deck speakers? Sometimes the pressure from the sub-woofers will move the cones of the rear deck speakers which causes voltage fluctuation in the signal line that goes into the converter. This then sends a feedback hum to the amplifier. Not sure if that converter has protection against that, but a solution I used to do was to use little plastic pods to cover the rear of the speakers and separate them from the trunk's airspace.
👌Love your content, keep up the amazing work 👌
EXO next time put solder on the iron tip then add new solder to back side of wire. When it is hot enough it will suck solder right in. And you know the solder job is good.
Oh yess!!! I love these type of vids im glad you are back Exo!
Thank you so much you were so helpful. Thanks to you I got my sub installed today!
Great video. Great technique. Very helpful information. Thanks for sharing.
I could be wrong but I have an LC2i and I think ideally you'd tap into a door speaker for a wider band to send to the sub where you can manually tune subsonic and high pass frequencies to better match whatever sub you have. For instance I might be lucky to be getting 50% give or take of what my 15" 2500 watt setup could do til I ditch the rear tap and go to the front more untouched signal. Of course if you're putting smaller subs in those factory tunes might be close to where you need to be but I think being able to really tune it in yourself regardless is the way to go to get the most optimal sound possible.
Nice job with the video editing bro keep up the great work!
Exo Contralto my long time friend and brother from anotha motha
I want to do something for my mom's 2016 CRV. She wants it a little louder but doesn't know how to use new high tech stereo systems. I'd get her two 8" subs. Maybe some explode 6by9s and explode door speakers two 8" subs w/500 watt 2 Channel & capacitor. 400 watt 4 channel for back, front & factory tweeters. Should be good enough for my mom. Factory stereo has an equalizer so I can make it sound perfect that match that amplifiers get the best possible sound at Max. No Distortion just crystal clear balanced. I built at least 13 systems. So I know I can make a factory setup work I never tried it though.
I still recommend radio shack daily. Only once has someone told me they are closed and I say "ohh yeah"
You are an awesome teacher ... thanks a lot EXO
You should get an old Subaru Forester. They're great for car audio systems and keep the sound in suprisingly well.
exo im going for something in my trunk of my 09 lincon mkz man give me some guides on what i want in there my budget is 700$ plz man u got me into bass big dog glad to see you back
Thanks for your help very appreciate
Definitely gonna buy one, mine broke when I was switching rca's
Even simpler is using the high input from the amplifier 😉😉
You could also buy an amp with build in high level inputs. I assume you can still buy those.
They still sell them even the Dual amp from Walmart has it and it's just $30, not bad either for powering the speakers on the doors.
@@noelmedina6925 dual suck over heats and it's craps don't buy that shit spend over $100 for a good one.
Thank you for a great video
If all else fails... Tesa Tape for the win!
Mr exo u gotta use a 2" piece of that Tessa tape and it will keep that heatshrink higher up & heat protection alil too!
*Or* if you use an OWC harness adapter you don't need an LOC at all. You basically get an all-in-one car audio interface that gives everything you need, except the main power & ground for the new amplifiers. The adapters are however only for Nissan and Infiniti at the moment.
I normally use a 4ch converter saves you upgrading later and I normally put the converter closer to the head unit and run the RCA’s back to the boot
The shorter the length of wire the clean the sign....I used those I perfer not to used the stock radio....Even when running speaker wire from amps to speak shorter length and good gauge wire stronger cleaner power
Great video thanks bro
Saludos de mexico
That’s why I use butt connectors and shrink tube easier and quicker and if you know what your doing it’s just as strong. I install water well pumps the same way for 20 years and those connections last under water that long and I have pulled pumps by the wire that have had broken pipes so if you can pull hundreds of pounds on my connections I’m fine with them in my automotive needs.
learned a ton, thank you.
Thank you so much helped me allot I feel confident
Bro, just use some brass crimp connectors, i know a lot of people swear by soldering wires but i promise you it creates just as good if not a better connection & you're not dripping solder all over.
Exo. Man. You should have picked up signal from the Front Speakers. That way the bass and fronts are "almost in time" with each other.
bro those signals in that old corolla arent timed lol, they all have the same signal front and back, no processing going on
I usually twist them 2 times then wrap them. Even without solder the wires break when you try and pull them apart.
ok I bought a car that they installed a car stereo and I tried to put an amplifier and a subwoofer but the amplifier does not sound so I can use this method to connect it thank you very much
Jesus, that blowing on the solder....
Wonder how many other people think your voice sounds like aziz Ansari
Lol awesome I wouldn't though of using a pillow in the trunk, it really is hard
Hi Exo, can I know how do you determine which pair of speakers (front or rear pairs) are the ones you should connect the LOC to. Also, is there such a thing as a 4 channel LOC? If so, will you be doing a video on that too? Thanks very much and great work dude!
Loving the videos. Super helpful man. But why use carpet tape for the crimp connectors instead of heat shrink?
Also, no rubber or carpet behind the line input converter? Won’t it rattle with the zip ties?
👍🏼
Great video bro
I have tested and have probably found the best Bluetooth receiver there is. I know you're installing a high-level to low-level converter but you can skip the factory set up entirely and not worry about the dirty signal from that factory head unit. Even being that simple it's probably got bass roll off in it keeping the owner of the car from blowing the speakers. Probably getting off 50hz and below. You end up making up for that with your bass boost on the amp.
So why not skip that entirely and use your phone or tablet as your media player???
Dual Electronics has really stepped their presence up over the last 2 years from Walmart purchasing two amplifiers from ds18 and re labeling them....the two channel is $30 right now by the way which is a crazy ass insane deal lol.... And this Bluetooth receiver with equalizer.
Now I'm calling it exactly what it is. It's more of a Bluetooth receiver than it is an EQ. Of course dual wants to label it the other way. You can receive Bluetooth 4.0 signal from your phone or a single RCA input. It has 6 outputs and here's the best part..... They each are rated up to five volts! When I tested it I saw an average of 4.3 but still, considering Rockford Fosgate's Bluetooth receiver is the same price, has no EQ, and only has an output of 900 mv (not even a volt), at $60 shipped makes this thing and extremely great deal!
Better yet not only can you stream from your phone it also has an app you can download to control the EQ, separate bass control, and fader and balance! And also has a place for a bass knob if you want to add one.
All you have to do is get power and ground ....which will be easy considering it's right next to your amps.
Another thing is that the device sees you when your phone connects and turns on the device and amplifier turn on lead to go to your amps!
It's Bluetooth section utilizes A2DP AND A 24-BIT DAC the best sound quality via Bluetooth. I could not tell the difference in fact it sounded better then using the RCA inputs from an aftermarket head unit.
Once again all you got to do is put it you're the amps and run your RCA's from it!
It saves so much time since there's no soldering needed, no additional cable ran from the front, and you're able to bypass that factory head unit unless you have to have a CD player. that case I would go on eBay and buy a portable CD player and plug it into the RCA inputs LOL.
Here is a link to it on eBay for sale....
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F132961091349
just to remember alot of newer cars have complete plug and play amp add on harnesses you can get. shouldn't have to splice into speaker wire then. but these work too.
I would love to work with this guy