$200 3D Printer With Auto Bed Leveling! Review Of The TronXY XY-2 PRO 3D Printer
Вставка
- Опубліковано 6 лип 2024
- Love the channel? Consider supporting me on Patreon:
www.patreon.com/user?u=806627
Find out more or purchase yours here:
www.gearbest.com/3d-printers-...
or here:
www.amazon.com/TRONXY-Upgrade...
amzn.to/366uBlT
amzn.to/2DN8u87
In this video we take a look at the TronXY XY-2 PRO 3D Printer. This is a budget 3D Printer that has a ton of features. I was curious as to whether the bed leveling was going to work after my poor experience with Auto Bed Leveling on other budget printers. This 3D printer did not disappoint and in this video I share my experience.
(´∀｀)♡ Affiliate Links:
Buy now on Amazon: amzn.to/2jQAOgV
Purchasing from the affiliate links is a great way to help to support the channel, it does not cost any extra, but a small percentage of the purchase goes to the channel!
Subscribe To My 3d Printing Blog! :
Lets Get Social!
Facebook: / dopesoner930
Twitter: / dopesoner930
Instagram: / modbotarmy
Google+: plus.google.com/b/11044326910...
Twitch: / dopesoner930 - Розваги
![ОРБАН приехал к ПУТИНУ и "отчитался" о поездке в Киев 😁 [Пародия]](http://i.ytimg.com/vi/_0ukDovOWq8/mqdefault.jpg)
Picked one of these up for $140! Can't beat that!
Great review. Thanks for the info!
Awesome video. Do you know if this printer has thermal runaway detection? if so is it turned on?
Yes, the older models did use acrylic and they most certainly contort if moved. I just recently picked up a couple of the x2-pros. I'm interested in seeing how well they perform.
Great review video thanks.
Great review! The clip thing would drive me nuts too.
hi my friend, can you use the direct drive extruder guide for the ender 3 in this tronxy xy-2 pro? and if I converted to direct drive can I put another z-rod/motor to prevent sagging? and for last, would you recommend to change the bed for glass?
Hello. Can you measure on the beams how long the rails are needed for installation on the X and Y axes? Thanks in advance! Great video.
Do you have any tips for getting this to be level I noticed after leveling it manually then moving it around it doesnt stay level any ideas why?
Great insight! Thanks
I like Tronxy, good to see them moving on with machines like this.
I feel that they have been so close but just not there for a while. This machine definitely caught me by surprise. Hats off to whoever on their team decided on this config.
I have the Chauncey XY to and when I try to go to the Z offset icon it says please enable leveling compensation first what does that mean how do I do it
back when i purchased my 1st printer, an anet A8, it came with a 1kg spool of pla AND a 250g spool of pla. ahh, those were the days
In cura set it up as the ender 3 and adjust bed size. It is hit or miss if you set it up as custom fff
Hello, after started the printer and see the printer informations the screen is blank working but menu is not available thanks for the help.
I been looking for a 3d printer this size or bigger . I did come up with Tronxy on the net and liked what it had and with out any revues on youtube or the net I did order one today . It was the Tronxy XY2 Pro . Now I had a chance to really to find out how good it was for the price . I paid 167.00 for mine at 3D printers Bay . I just could not pass that up at all . Now for the reinsurance of this video I made the right choice . Thanks .
Thanks for the great review! I’ve watched so many printer reviews, my head is starting to hurt. About to order this one as my first printer!
And how did it go mate about to do the same
Liam Earnshaw love it!! It was well worth the money. Although, in the last 2 months, I’m sure there are dozens of new printers to consider hahah. You won’t be disappointed with this one though.
Cool mate just ordered one then can't beat it for the price
Just ordered one today
So I was looking to grab the ender v2 or Tron xy2 and I like the Tron better I think. I do not have any experience and am looking to build drones . Anyways do u think the Tron xy2 is better than the ender v2?
now i have a tronxy-2 pro and i am pretty happy w/i
How does this machine rate in Sept 2021? I'd like to have Direct drive as well as auto leveling.
Works work cura software ? Thank you
I bought an XY-2 Pro recently and I got the version with the upgraded motherboard, and it is really silent. All I hear is a soft sound from the fans, the stepper motors I can't bearly hear. It prints great, both PLA and PETG without any problem, so I'm super happy :) Btw, great review, love your channel :)
That is awesome to hear! I am stoked you got one and that you are happy with it. Thank you for watching 👍
I'm pretty interested in this machine, how can I know if it's the upgraded one? Also I saw another comment saying how noisy it was. Soooooo.... now I'm confused. Lol
Is the hotend/tube good enough for PETG? I have an Ender, and I have stopped using PETG until I can get an all metal hotend.
I got one with the 1.5 board, only found this out when I heard a pop and smelt burnt circuitry, z axis stopped and screen only displays white. luckily still in warranty though.
nice review man, I just purchased 1 myself. I couldn't find any mods/upgrades for this printer online anywhere which is a bummer. Have you done or recommend any upgrades to this thing?
How is the printer going mate?
@@sexyfacenation its great honestly. It was OK from factory, but over the time Ive owned it, I upgraded the extruder and rewrote the gcode for the firmware to calibrate and dial it in and its been awesome since. I only upgraded the extruder (SeeMeCNC EZR which works flawlessly for me) for TPU. The stock extruder is not great for flexible filaments, kept jamming, but works great for harder plastics.
@@nathana5379 thanks for that mate. I will give it a shot. For the price it is hard to ignore, and I don't need to do flexible (at this stage)
Cheers
Any good parameters for this one?
Thank you
I am looking to get a 3D printer in this price range ($200 - $300) and am quite intrigued by this one. But I've been doing a lot of research and also considering, a base Ender 3, and then upgrading the motherboard, drivers, extruder (to direct drive) and the display. The TronXY seems like a better deal, but how upgradeable is it? Can I replace the mainboard? Does it use Marlin for the OS? Any guidance would be appreciated.
You could always get an ender 3 with an attached BL Touch.
Great review!
Just one thing… you said that you don’t like printing with PETG because of the 250 teflon tube limitation. I put Capricorn tubing in my hotends (Bowden and direct) because Capricorn states their XL TUBES (not their translucent one) can print all day at 270C so I print with PETG and some Nylons all the time now.
How loud is the printer?
I just bought this machine is it possible to put the magnetic bed from an ender 3 pro on it or a pei flex bed?
im guessing it would
Had one. It broke in 3 weeks. Printed great while it worked. And honestly it had less to do with the machine itself. It was the included SD card that failed. But failed catastrophically and took the controller board out. Found out when I plugged the card in and computer locked up and the card got so hot it burnt my finger when I took it out. Also this won't work out of the box with octoprint. There are 2 plugins to work around firmware issues.
Couldn't you replace the controller with a SKR ?
So. I have 5 spools of unused PLA lol. My printer bed is dead, and I can’t find a replacement (my flashforge lite printer). So this will take its place.
Please help me i bought one and I made a design on stl format but it never print it and I couldn’t use it with the usb cord
You need to slice it and convert to gcode first.
if you decrease bed temp while printing it will help with removing prints from bed
only thing holding me back from this machine is the incredible amount of noise in their prints.
ender 3 build area is 220 by 220 by 250 tronxy 250 by 250 by 260 so how's that's the same as a ender????
The problem of the CR10s Pro with Autobedleveling is 100% a firmware problem. I even upgraded to a bltouch but that didnt help eithe. I really tried everything but the solution was upgrading to marlin 2.0. Since that everything works flawless.
how does the Tronxy compair to the ender v2
Go with the Ender. Way bigger community/support
: P Merry X mas everybody >:)
I'm really split between this and the Ender 3. Which one would ultimately be the better choice?
I really do love my Ender 3
@@ModBotArmy After thinking it through some more, I think I'll go for the Ender 3. Happy printing!
StRiKe awesome man :) happy printing!!
@@ModBotArmy This one seems better than the Ender 3 - what's the difference between them?
@@strike171 I HAVE BOTH. SIZE 25 X 25 I CAN ACCOMODATE MORE MODELS AT ONE TIME AND COLOR LCD AND FULL MENU CONTROL IS MUCH BETTER IN TIMES OF PRESSURE. I ALWAYS LOOK TO PRINT FIRST ON TRONXY. ENDER 3 IS OK BUT I DON´T UNDERSTAND WHY IS LIKED SO MUCH, LOOKS LIKE YEARS BEHIND, FORD T.
OH DREEEEAAAAMMMMM!!!
so this or ender 3 for a first printer?
I am tackling this decision.
This one is cheaper and in stock. You'll do the same upgrades to this as you will with the Ender 3 like upgrade the fans, the power supply and controller as well as the stepper drivers and are BL Touch for bed leveling on the Ender which this already has. You'll upgrade to a better Hot end and extruder. Pretty much rebuild the whole thing but the frame
i started with a abet a8 at 13
I order the tronxy xy-2 pro Titan extruder version on sale for 235 euros on it from gearbest
They have a newer one. TRONXY New Upgraded Ultra Silent Motherboard + Titan Extruder3D Printer XY-2 Pro
The Titan Extruder works with it?
To bad they have no support. I have been waiting for 3 weeks for a reply to an email for support. I waited a week then I emailed them again, to no avail
I am sure that is because of the holidays and corona virus most of the Chinese factories have been shut down for over 3 weeks now
Why not get help online on Reddit and discord? It's a basic 3D printer... Not hard to fix.
There is one of thease in my little girls room she's 6 im thinking I'm not supposed to know its there I think it may be my Xmas present woops
Amazon rating is horrible, I think I'm going to buy one anyways. I can always print spare parts with my select mini e3d
lol, you can get those clips at the dollar store
Just bought it for 167$ on Walmart app
Good. That is "assisted leveling" not actually "auto leveling".
sent mine back ..nothing but problems and burnt a hole in the bed !!
How did you manage to burn a hole in the bed?? I guess I could see with the surface since it is a plastic but the nozzle would have to really dig into it. What other issues did you have??
@@ModBotArmy i had it two days first print was great and easy to setup...then i started to have problems with the z axis and auto bed level was off by 10mm!! then i tried a second print and come back with the hotend stuck into the bed burning a hole in the fibre glass bed!!! sent it back and now have a ender 3 pro
@@gregory3340 I have the same problem, I ordered one for my brother and its a nightmare, going to send it back for an ender 3 pro. crap machines.
@@TheToolReview Probably it is the Bed Level Sensor that is slightly too high up, try lower it slightly, and it should work like a charm.
Lol. Instructions unclear. Burn hole through bed. A legit meme.
Great video but a suggestion, u need to work on your b-roll. Too shaky and not focused.
Appreciate the feedback! Will definitely work on it :)
Not cool both links over 200 one slightly the other slot.
I got you! www.3dprintersonlinestore.com/tronxy-xy-2-pro-3d-printer
cant like cuz its at 420 lol
Just review and stop jacking prices bro