My brother to God be the glory for that gift he gave you , I've watch you creativity and I know you're a fabricator not only a welder keep on doing your best and put God first.
Bonjour Mr rany, je suis d Algérie, et je suis tes vidéos, tu ma fait un grand plaisir pour ton travail. Je suis entrain de rassemblée tous la ferraille pour fabriqué un petit tour entre pointe 40 cm. MERCI et bonnes courage, que dieu ( Allah ) avec toi.
Your welcome I’m so happy my homemade tools now Planning homemade milling machine but I’m thinking can be running or not because plates metal cost really expensive. Thanks for your comment 🙏
Masterpiece! Well done! Far more interesting than the majority of homemade lathes of milling machines in youtube that use commercial linear bearings and rails bolted down.
Thanks for your comment It is nice work and handful and help me a lots but, rail way is not perfect at all because I did by hand and this is my first time I made lathe never learn and never seen just only watching from UA-camr, I have another job but Covid changed my experience after jobless. I think now should be enough for me making new lathe soon if possible. Thanks again for your suggestion.
llinearne vedenie je presnejsie veľa zváraných spojov pokrúti materiál sám som sa z toho poučil presne takto som si spravil sústruh a idem ho prestavať na lineárne kolajnice
@@mr.ranyhomemade2466 Absolutely my friend. It took me a long while to find a decent one for my freezing cold shop in the barn. I was able to source one from an estate sale and now I have put my sights on building a milling machine. I love your lathe . The lathe is the only machine that can not only remake itself even better but make all the other machines in the machine shop. Excellent work. Everything looks better than a factory made lathe. Keep up the great work and I will share your video to all my maker friends.
Thanks C Mac I appreciated your comment. I haven't any experience as much just learned from UA-camr and have some problems because I do not understand the basics of how to start, otherwise, the equipment as used only grind angle cut and hand drill press for drill cut plates thick metal. But I'm so happy with my homemade work and now it works very well too so I can push my other plans like the Milling machine. I just finished my Chop Saw. This time Milling machine was a bit slow because of the budget but I still hoping. Thanks again Mac
You did a terrific job making a really heavy duty stable lathe and the video was really nice to watch moving along quickly and some good music accompaniment Thank you
Thanks for your comment in this video. I think is not a hundred perfect because all by hand have something went wrong too. It is my first time had done this. Now I’m looking a new homemade metal lathe if possible.
Thank you for your review and comment about the video and right I'm planning my homemade milling machine but a bit slow because of budget I will try my best. Thanks again
Thanks so much for your comment I hope you enjoyed the future I will upgrade much better than, now I understood than the first time without experience only watched making Thanks again
Many thanks for your comment I really happy with homemade lathe it help me a lot for my next project if possible I will build another lathe. Thanks again we hope can be sharing information together
Congratulations Mr Rany, you are working with basic tools and creating a wonderfully useful piece of machinery, which can be used to create much more accurate parts, that can be used to make more accurate machines.... You should be very proud of your talent and metal-working skills, which have highlighted how someone with determination and patience can produce a capable machine, without just clicking a 'buy' button and having a completed item delivered a few days later. Off to check out your other videos now. Subscribed.
Thanks for the comment and hope you have enjoyed this lathe. I'm so happy about it because it helps me a lot especially let me continue to other machines as I did and now I am planning to build a milling machine so if I could finish Miller it sure continues to the next step. Buy seem to slow because some kind of thing never found in my city and the metals are so expensive and I used to order online for the prices of the tools are ok but shipping much over than tools this is a problem. Thanks again
You should look into making some surface plates and straight edges via scraping with the three plate method. Then you'd be able to get your ways perfectly straight and flat, and the parts you make with the lathe would be even higher precision!
Thanks for the recommendations I knew is not perfect at all but it help me a lot with other machines seem to late now today I have new project homemade lathe. This time I can say much better.
Thanks my friend. That works well with the old one but it is small so I have upgraded new one and it almost finished, The new lathe much power . The Power DIY Steady Rest Working On A DIY Lathe ua-cam.com/video/L6pLIhb4xvM/v-deo.html
Amazing yes, However why did you opt for angle iron as an accurate means to achieve true flite? You would have done better to have had your flites machined on a true machine in order to make yours an accurate flite. Flite travel should always be one inch or thicker flat plate that's been face machined.
Thanks for watching and commenting, I truly do not know how can I make first time because I never learned how and have never seen it before just watch it on social media because Covid 19 I don't have a job. Now I can understand some parts of the lathe. But I still wondering about the southbend and how to set up the gear to run and how to make bolts and nuts. Thanks again
Thanks for your comment I knew someone part was impossible but no choice because I never founded in my city sometimes my people said I crazy and waste time. And metal cost expensive for my tools only a small grinder angle cut and press drill and welder that it. Thanks your suggestion
Obrigado meu caro amigo por seus comentários Sim, eu tenho uma preocupação de que este motor não esteja bom porque o mandril e o fuso estão em curto, então quando eu faço perfurações profundas, Shacking. Então estou pensando em mudar. Conheço o trabalho lento, mas preciso ser perfeito.
I like the rail design. Nice build.
@@JeremeSalazar thanks for your best time watching this video
Отличная работа! Золотые руки и голова уважаю таких людей!с меня лайк.
Many thanks
My brother to God be the glory for that gift he gave you , I've watch you creativity and I know you're a fabricator not only a welder keep on doing your best and put God first.
Simple tools to make perfect result. Amazing. Thank's for this video.🙏
Thanks for your watching I do hope you liked now having new projects Lathe
What a genius I enjoyed this video so much great skills and workmanship
Thanks for your comment 👍🏻👍🏻👏👏
Bonjour Mr rany, je suis d Algérie, et je suis tes vidéos, tu ma fait un grand plaisir pour ton travail. Je suis entrain de rassemblée tous la ferraille pour fabriqué un petit tour entre pointe 40 cm. MERCI et bonnes courage, que dieu ( Allah ) avec toi.
Greetings from Canada. Thank you for showing your very impresive lathe and how you made it.
Your welcome I’m so happy my homemade tools now Planning homemade milling machine but I’m thinking can be running or not because plates metal cost really expensive.
Thanks for your comment 🙏
good job, just can say...you are an artist
Thanks for your comment I hope you’re enjoying
It lovely work
Beatifull video and better music 👍 thanks, (seriously I wish all the videos has a music like that, is the best to enjoy the information) best regards.
Thanks for your feedback
I rather without music but super crazy around my village and house Almost everyday music.
Thank again I will try my best
Отличная работа, классный станок получился 👍
Masterpiece! Well done! Far more interesting than the majority of homemade lathes of milling machines in youtube that use commercial linear bearings and rails bolted down.
Thanks for your comment
It is nice work and handful and help me a lots but, rail way is not perfect at all because I did by hand and this is my first time I made lathe never learn and never seen just only watching from UA-camr, I have another job but Covid changed my experience after jobless. I think now should be enough for me making new lathe soon if possible.
Thanks again for your suggestion.
llinearne vedenie je presnejsie veľa zváraných spojov pokrúti materiál sám som sa z toho poučil presne takto som si spravil sústruh a idem ho prestavať na lineárne kolajnice
New subscriber here. Really beautiful work. That thing is so cool and it fits the decor of the garage/man cave..
Thank you for your support I do hope you enjoy it. I will try my best
@@mr.ranyhomemade2466 Absolutely my friend. It took me a long while to find a decent one for my freezing cold shop in the barn. I was able to source one from an estate sale and now I have put my sights on building a milling machine. I love your lathe . The lathe is the only machine that can not only remake itself even better but make all the other machines in the machine shop. Excellent work. Everything looks better than a factory made lathe. Keep up the great work and I will share your video to all my maker friends.
thank you thank you you do a great job thank you for sharing ❤🎉
Hi , very good work , you should be very proud of your work , and your knowledge of mechines ,I was a Mechinist for 40 years.
Thanks C Mac I appreciated your comment.
I haven't any experience as much just learned from UA-camr and have some problems because I do not understand the basics of how to start, otherwise, the equipment as used only grind angle cut and hand drill press for drill cut plates thick metal. But I'm so happy with my homemade work and now it works very well too so I can push my other plans like the Milling machine. I just finished my Chop Saw. This time Milling machine was a bit slow because of the budget but I still hoping.
Thanks again Mac
i appriciate u to complete a very expencive project .love u
Thanks for the great shearing
You did a terrific job making a really heavy duty stable lathe and the video was really nice to watch moving along quickly and some good music accompaniment
Thank you
Thanks for your comment in this video.
I think is not a hundred perfect because all by hand have something went wrong too. It is my first time had done this. Now I’m looking a new homemade metal lathe if possible.
Fantástico meu amigo!!!
Boa sorte e saúde no trabalho com seu torno caseiro!!!
Abraço do seu amigo aqui do Brasil!!!
Thanks for sharing info and comment
57535
@@mr.ranyhomemade2466 yúq
My respect as a machine builder. Handsome lathe👍👍👍
Thanks for your watching and comment
Hope you enjoyed
Thanks for your watching and comment
Hope you enjoyed
I had done this now it handful to help me next project
Хорошая работа проделана, молодец!
Thanks for your comment
Excelente juguete profe , mis respetos , solo le falta la rosca patrón , saludos desde SICUANI Cusco Perú 🇵🇪
Thank you for your review and comment about the video and right I'm planning my homemade milling machine but a bit slow because of budget I will try my best. Thanks again
ABSOLUTELY AMAZING. A beautiful machine, made with hand tools (including itself). You are a true craftsman!
Thanks so much for your comment I hope you enjoyed the future I will upgrade much better than, now I understood than the first time without experience only watched making
Thanks again
Parabéns amigo esse foi ò melhor passo à passo dó UA-cam ficou excelente
Thanks for watching comment
absolutely amazing ! really enjoy watching your lathe build, very talented! thanks for posting.
Many thanks for your comment
I really happy with homemade lathe it help me a lot for my next project if possible I will build another lathe.
Thanks again we hope can be sharing information together
Awesome step by step
Thanks
incredible work!
Belo Trabalho e muita dedicação, Parabéns
Thanks
Thanks
Thanks
Congratulations Mr Rany, you are working with basic tools and creating a wonderfully useful piece of machinery, which can be used to create much more accurate parts, that can be used to make more accurate machines....
You should be very proud of your talent and metal-working skills, which have highlighted how someone with determination and patience can produce a capable machine, without just clicking a 'buy' button and having a completed item delivered a few days later.
Off to check out your other videos now.
Subscribed.
Thanks for the comment and hope you have enjoyed this lathe. I'm so happy about it because it helps me a lot especially let me continue to other machines as I did and now I am planning to build a milling machine so if I could finish Miller it sure continues to the next step. Buy seem to slow because some kind of thing never found in my city and the metals are so expensive and I used to order online for the prices of the tools are ok but shipping much over than tools this is a problem.
Thanks again
Congrats brother ,a job well done, background music is not that good though make it more a thrilling action music Peace Brother! love your work
Thank you for your comments I appreciated
I do apologize for this I had a lot of feedback about this music but no choice because around my house music
Great job man!!!!!!!!!!
Thanks mate if possible I will update new lathe
@@mr.ranyhomemade2466 Can't wait to see some more of ur DIY Lathe machine
Ola sou o joao: gosto muito dos seus video, muito bons . gostei muito da retifica que voce fez, eu vou fazer uma pra min. o brigado a migo.
Many thanks for your comment I do hope you enjoy it and will try my best for my next project.
Felicitaciones, bonita máquina y robusta
Thanks for sharing info and comment together 👍🏻👍🏻👍🏻
Good video. Inspiration.
Thanks for your comment I hope you are enjoying
Mo buhat pd ku puhon ana boss ,ayus kaau boss
Many thanks for your comments
🙏🙏🙏
Well done!
Молодец, удачи тебе 👍
Thanks my best friend
Profissional amigo parabéns 👏👏👏
Thanks for your comment I hope you enjoyed it. I will try my best if I can.
Great job
You're welcome
Thanks for your comment 🙏🙏🙏
love the steel toed safety sandles
Thanks for your comment hope you enjoyed
Cool work sir 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Um trabalho muito impressionante.
thanks my dear friend
Amazing..... you are brilliant man.
Keep it up 😉😉,
Many thanks for your comment
It helps me a lot right now.
You should look into making some surface plates and straight edges via scraping with the three plate method. Then you'd be able to get your ways perfectly straight and flat, and the parts you make with the lathe would be even higher precision!
Thanks for the recommendations I knew is not perfect at all but it help me a lot with other machines seem to late now today I have new project homemade lathe. This time I can say much better.
1:06 I hope the dog didn't forget to take the goggles?
انت فنان عمل رائع
Thanks my friend.
That works well with the old one but it is small so I have upgraded new one and it almost finished, The new lathe much power .
The Power DIY Steady Rest Working On A DIY Lathe
ua-cam.com/video/L6pLIhb4xvM/v-deo.html
great job
Thank you for your interest and time
Werry good
Thanks for your comment
I hope you like
Amazing yes, However why did you opt for angle iron as an accurate means to achieve true flite?
You would have done better to have had your flites machined on a true machine in order to make yours an accurate flite. Flite travel should always be one inch or thicker flat plate that's been face machined.
Thanks for watching and commenting, I truly do not know how can I make first time because I never learned how and have never seen it before just watch it on social media because Covid 19 I don't have a job.
Now I can understand some parts of the lathe. But I still wondering about the southbend and how to set up the gear to run and how to make bolts and nuts.
Thanks again
Awesome!
Thank you so much for comment
Impresionante.
Many thanks for your comment
Buen trabajo 👍👍👍
Thanks for watching and comment
I would use positive rake inserts not those you are using.
Because the negative inserts like yours are for rigid, powerfull and havier machines.
Thanks for your comment
I knew someone part was impossible but no choice because I never founded in my city sometimes my people said I crazy and waste time. And metal cost expensive for my tools only a small grinder angle cut and press drill and welder that it.
Thanks your suggestion
That is perfect
Thanks for your watching and comment
Hope you enjoyed
Keren om
Thanks for your comment
very Good
Many thanks for your comment
Thanks mr.
Thank you to fit your watching
Parabéns 👏👏👏 vc pode passa o progeto
Thanks my dear friend
Good machine
Yes, thanks
Sir hm po kaya aabutin pagka nagpagawa sa inyo ng ganyan diy lathe
Thanks for your best time I do hope you enjoyed this. Now I have new project for my homemade lathe .
Такой станок отличный получился, а штурвал подачи суппорта крутится в обратную сторону...
Thanks
Il faller que tu donne des mesures avec les qualités des métaux merci
Thanks mate
Show👏👏
Thanks my friend
I wait to see you too
👍🏽👍🏽
Thanks
❤❤❤❤❤
👍👍👍👍
человек у которого есть свой Lexus собирает себе самодельный токарный станок.
Thanks 😊
weird sound for this works
Thanks
🤜🤛
Thanks for your comment
10:31 😂😂😂😊
Quanto
Руки золотые, но знания не твоë
Obrigado meu caro amigo por seus comentários
Sim, eu tenho uma preocupação de que este motor não esteja bom porque o mandril e o fuso estão em curto, então quando eu faço perfurações profundas, Shacking. Então estou pensando em mudar. Conheço o trabalho lento, mas preciso ser perfeito.
Показал бы точность станка, замерами проточенной болванки у патрона и у задней бабки, может там лютая конусность 1+мм на длинные в 300мм.
Thanks for your introduction
I appreciated