Well NumaVIG, my 8yr old saw this and asked if he could do it. He finished it today with only a little bit of help from me and it flies wonderfully! Thank you so much for all the joy of a weekend in the shed and all the flying to come.
Very good tutorial. Thank you! I've made the plane from 6mm depron for fuselage and 4mm for the wing cover, in the wings 6mm spars + 3 mm balsa. I've also added flaperons and safe with 6ch ar636. With 1300mah battery and 2400kv motor it flies like a dream and lands on a dime with 30% flaps in. It weights around 650g. All and all great tutorial, great technique, awesome design! If wouldn't you, I wouldn't start flying. Thank you.
@@pinchonalizo As per plans it's Clockwise as all common motors and propellers is. It flew great with 2205s/2300kv and 7x3.5 cw prop. Have fun building.
@@John-mk4mkNot all, many DIY RC's require a special type of foam board that is not so easy to find. This type of foam you can find in literally every hardware and decoration store.
Very good DIY demonstration video. The entire detailed assembly with the various controls is well planed, done and recorded so well with great finesse of work. Even I get ideas and ways of doing seeing from portions of your work. Superb!
Beautifully built, shot and edited! Even though I prefer parkjet/prop-in-slot style planes to conventional monoplane layouts, I watched the whole thing because the video was so good. :D Masterpiece!
Hi NumaVIG! Congratulations: clip of high quality! very easy to understand even for néophytes, clean and precise construction, but a hartbreaking end! waiting for the next clip!
Hi Numavig! just to let you know that this plane finally flew with the help of some people from the local RC club (there's a lot of things I didn't understand at first) I have to remake it anyways because of a few problems, thanks so much for getting me started in this hobby!
good work! BRAVO clean and precise. tip1- conecting end connections to rudder and elevator use HEAT SHRINK instead, you can calibrate and heat it on the spot you waant. tip2- HOT GLUE with gun goes well with foam and dries fast.
Thank you for the video and for plans! Few days ago I have build it and it flies very well. I used EPP instead of depron and I increased the wingspan to 120cm to make it slower and better at gliding ;)
I adore your videos! They are entertaining and thoughrouly enjoyable! I am sure many others think the same! I also love your own designs!!! Keep it up and happy flying...
Very nice looking build and attention to detail. I actually got really excited thinking you was going to build a wing the traditional way with ribs and spars. Oh well. Great work! I am subscribed now.
Hey great stuff, built a few different ones and built this with different foam board and came out over double the weight. Your spec weight says about 175 and mine ended up at 330. This shouldn’t be a problem as I also went a bit larger on motor and battery. Haven’t flown yet but will update after complete.
С новыми законами о БВС, теперь только и остаётся моделистам, что выезжать подальше в лес и там пускать свои модели, а иначе за несогласованный полет да ещё без регистрации ууу... Автору лайк!!!
Hello thank you very much for the plans and the manufacturing method, we used your plans for a small school project for my working child and here is the result. our plane can not fly since we can not get electrical parts thank you again and good luck.
@@NumaVIG вы очень здорово показываете процесс работы с материалом. Скажите процесс настройки авионики, выбор центра масс и балансировка планера умышленно не показана в видео? Или это простой процесс? Мы с сыном хотим попробовать повторить вашу работу , но никогда не строили самолёты, будем благодарны, если вы когда-нибудь покажете процесс предполетной подготовки🤗
I’d love to make this plane. You make it look so easy . Thanks for sharing . Saved the video to watch again later incase I decide to make one lol . Great channel brother keep the videos rolling.
Where on earth do I buy 4mm XPS foam or depron? & What glue is used (that doesn't dissolve the foam). Sanding noise is a bit excruciating, otherwise lack of weird music 👍
That's a nice airplane you got there, but as an RC plane builder I can't help it sohere are some tips to improve you plane : - your servos are very far away from your control surfaces so you have quite a lot of bending in the rod and therefore you loose some control over your plane - your propeller is barely bigger than your motor mount which makes you loose a lot of power and efficiency through the air. I agree it looks good on the plane, so if you don't change for a smaller motor mount you should get a bigger propeller and maybe a lower kv motor. It will allow you to have way more thrust with the same power level, you could even carry some payload which seems like the design of the plane.
I am getting jealous of you. How do people achieve such a perfection, my hand cut pieces are never accurate, they always have errors, vertical and horizontal stabilizer are most of the time tilted even after using triangle, and one wing always gets higher dihedral than the other 😭
As a first building project, yes. As a flyer, maybe not. I would recommend getting a flight simulator first and practicing. And if you've got any more questions you can message me on Discord ( there is a link to my server in the desc of my latest video) and I would be more than happy to help!
I build this rc plane in Styrofoam sheet the full weight of the my plane is 1350grams so what kind of motor I want to buy? Or a2212 2700kv motor in 10" Props is enough for my plane????
Thanks for this great material. I have one doubt and need help: piece ‘By has a 2% angle in its front. In which direction should the angel point? Left or right? Or it depends on the engine rotation?
Hi, thanks for posting this videos and inspiring us to adventure in this amazing world of RC planes. Im building your model. And I have few question: What model of Cessna is this? When you put the Scotch tape, you do on both sides or just one? It is really necessary the iron? if so why? Thanks, and looking forward for a reply.
thanks for sharing , I'm gonna make some shopping but before that , May I have an idea about the glue you are using for depron ? seem better than UHU Por . thanks in advance for you answer , regards from Belgium
Well NumaVIG, my 8yr old saw this and asked if he could do it. He finished it today with only a little bit of help from me and it flies wonderfully! Thank you so much for all the joy of a weekend in the shed and all the flying to come.
Nice! Thank you so much for not having loud unnecessary music.
Who needs to translate any language here? This is an awesome video of a fun build. Everything you need to know is here. *WELL DONE!*
This is one of those Extremely satisfying videos
Sir which transmiter,reciver use & where it available I m in India. I m biggener
@@Rohit-wu5pg buy in ebay, any transmitter will do, the cheap ones will do if ur a beginner
Its so refreshing to watch a video without the rubbish music playing
I subbed for that reason alone!
Yeah....
Yep....
Ikr
@Nobody else but me atleast some text on the screen maybe
Very good tutorial. Thank you! I've made the plane from 6mm depron for fuselage and 4mm for the wing cover, in the wings 6mm spars + 3 mm balsa. I've also added flaperons and safe with 6ch ar636. With 1300mah battery and 2400kv motor it flies like a dream and lands on a dime with 30% flaps in. It weights around 650g.
All and all great tutorial, great technique, awesome design! If wouldn't you, I wouldn't start flying. Thank you.
Hi! When you purchased the motor, do you know what orientation to get the threads in? clockwise or conterclockwise?
@@pinchonalizo As per plans it's Clockwise as all common motors and propellers is. It flew great with 2205s/2300kv and 7x3.5 cw prop. Have fun building.
@@pinchonalizo Threads tightens when motor is cw, so the shaft threads are like in any normlal bolt
pls help me with the wings length
@@naveendinakaran3814 Hey man, I made it 52cm each, 104 total length of the wing. Just make sure to make wing spars length accordingly.
I love this! Proper DIY plane built out of everyday stuff. Great work!
all diy rc planes are built out of every day stuff
@@John-mk4mkNot all, many DIY RC's require a special type of foam board that is not so easy to find. This type of foam you can find in literally every hardware and decoration store.
Вот и Толстой пригодился.
Шикарное видео без лишней болтологии.
угу, только все таки так клеить нельзя.. по крайней мере в моделях где есть хоть какая то культура веса...
@@vitgo вы не стесняйтесь, указываете моменты с таймингом и пояснениями, что и как сделать лучше :-)
@@vitgo а можно раскрой попросить? :)
Very good DIY demonstration video. The entire detailed assembly with the various controls is well planed, done and recorded so well with great finesse of work. Even I get ideas and ways of doing seeing from portions of your work. Superb!
Working on my cessna. Body almost complete. Too bad can’t post a picture. Very easy build. Thanks for sharing the plans.
Beautifully built, shot and edited! Even though I prefer parkjet/prop-in-slot style planes to conventional monoplane layouts, I watched the whole thing because the video was so good. :D Masterpiece!
Lovely video. Thanks for not adding music. Natural sound is the best.
I think so too
Hi NumaVIG! Congratulations: clip of high quality! very easy to understand even for néophytes, clean and precise construction, but a hartbreaking end! waiting for the next clip!
Thank you for helping me build my first successful RC plane.
Hi Numavig! just to let you know that this plane finally flew with the help of some people from the local RC club (there's a lot of things I didn't understand at first) I have to remake it anyways because of a few problems, thanks so much for getting me started in this hobby!
after watching your vid this is the first one i built. Have built some more of yours since. You got me on a roll,Cheers
good work! BRAVO clean and precise.
tip1- conecting end connections to rudder and elevator use HEAT SHRINK instead, you can calibrate and heat it on the spot you waant. tip2- HOT GLUE with gun goes well with foam and dries fast.
You just got over on Josh Bixler without saying a word. Good work. But we still love Josh.
Less Talk More Action!
Straight up no bull .
Thanks Numa I like your style and l like the Cessna .
Enjoy your channel greatly, very informative lots of great builds. Thanks.
Thanks for sharing a remarkable video, this one of the best I'd even watched, very enjoyable.
the detailed section on wings is so helpful
Thank you for the video and for plans! Few days ago I have build it and it flies very well. I used EPP instead of depron and I increased the wingspan to 120cm to make it slower and better at gliding ;)
Hi, do you think I can make mine 45 inches instead of 51 like yours? Thanks
Lovely project to do with my grandchild plus one could hear the natural sounds. Thanks.
Ну наконец-то хоть одно видео БЕЗ ДУРАЦКОЙ МУЗЫКИ.
Согласен
Да ладно, звук шуршания плитки тоже не идеальная замена🤗 Хотя так работа чувствуется прям как сам скребешь))))
@@Serpolio Я когда сморю, у меня супругу выворачивает. Говорит, как будто пенопластом по стеклу.
I adore your videos! They are entertaining and thoughrouly enjoyable! I am sure many others think the same! I also love your own designs!!! Keep it up and happy flying...
Thanks for sharing!, That tape idea for the control surfaces is a great idea!
Very nice looking build and attention to detail. I actually got really excited thinking you was going to build a wing the traditional way with ribs and spars. Oh well. Great work! I am subscribed now.
I wouldn'd use Tolostoi books as pressure weight :-D, ordered all material and can't wait to replicate your great job
Hi! im looking to do the same! How do you know if the motor you need will be clockwise or counterclockwise screw thread?
May i ask about how much the orders came out to cost?
Elegant and clean builds. Thank you.
Hey great stuff, built a few different ones and built this with different foam board and came out over double the weight. Your spec weight says about 175 and mine ended up at 330. This shouldn’t be a problem as I also went a bit larger on motor and battery. Haven’t flown yet but will update after complete.
Excellent! Thanks for giving me an option to buying a kit!
С новыми законами о БВС, теперь только и остаётся моделистам, что выезжать подальше в лес и там пускать свои модели, а иначе за несогласованный полет да ещё без регистрации ууу... Автору лайк!!!
この動画を参考にして作って見ました！とても飛びます！
ありがとうございます😊
If that central V plate that joins the two spars is made of balsa, then it seems a bit weak for the size of the craft.
Hello thank you very much for the plans and the manufacturing method, we used your plans for a small school project for my working child and here is the result. our plane can not fly since we can not get electrical parts thank you again and good luck.
Nice work, some interesting build techniques and materials 🧐
Как всегда отличная модель, молодец так держать. (на этот раз из потолочки а не из подложки под ламинат).
захотелось белый, типа Депрон, а подложка вся разноцветная, но следующий оранжевый будет
Such a positive comment section I hope I can get my channel off the ground doing stuff like this
I'm gonna get into a good competitor!
This construction of this plan and the video is a great job
Grazie mille .sono un principiante ..mi siete stati di un grande aiuto..
This is amazing and I enjoyed it very much. Always looking forward to new adventures on your channel. Thanks very much! : )
wow, so light, and only 2 servos, and even 1 meter wingspan :)
Nice project bro, every detail is perfect. I like the landing wheel, even it's not useable on this video. Good job 👍
there is some problems to find the runway in the forest
Bro, u r one of the best I have seen
Very nice video and a lovely little plane!
Приятно смотреть ваши видео! Жаль, что канал ориентирован только на иностранцев. Возможно, в этом есть какой-то смысл. Спасибо вам за выкройки!😍
Канал ориентирован на весь мир, в статистике более 200 стран
@@NumaVIG вы очень здорово показываете процесс работы с материалом. Скажите процесс настройки авионики, выбор центра масс и балансировка планера умышленно не показана в видео? Или это простой процесс? Мы с сыном хотим попробовать повторить вашу работу , но никогда не строили самолёты, будем благодарны, если вы когда-нибудь покажете процесс предполетной подготовки🤗
так нет никакой предполетной подготовки, а центр тяжести указан на чертежах
I’d love to make this plane. You make it look so easy . Thanks for sharing . Saved the video to watch again later incase I decide to make one lol . Great channel brother keep the videos rolling.
Не знаю, уже наверно 2 раз пересматриваю и все равно приятно! У меня кстати тоже есть само́леты)
cara sou brasileiro e ja curti seu canal, sem uma palavra consegui entender tudo, vou tentar fazer seus aeros muito show... londrina no Paraná
Very clean build. Thanks
Subscribed, He's good and thanks
Thanx very much best vid I have seen yet
Отличное видео, приятно смотреть.
Лайк за Л.Н. Толстого
Gran vídeo y gran campo de vuelo, me recuerda a mi pueblo con los chopos de fondo. Gran avión que intentare construir. Un saludo
Молодец. Лев Толстой памагает тоже 😃
Awesome plane sir
Sir which glue or adhesive you are using in syringe
UHU Por
Where on earth do I buy 4mm XPS foam or depron?
& What glue is used (that doesn't dissolve the foam).
Sanding noise is a bit excruciating, otherwise lack of weird music 👍
Friend, nice work. Fast and efficient. What glue did you use?
1:19
@@NumaVIG Thanks a lot.
I have a question what is the length of both wing halves I’m a little confuse on the wing construction about to start my build
Hello, can you just say what is thé lenght of the aileron? Thanks
felicitaciones..... muy prolijo tu trabajo.... un abrazo
Neat flyer,nice video tutorial too.
Great build and video.
Hello,on the video the wingtips are not the same as on the plan, should this change be made? If yes, how?
How did you connect the electronics you used. Esc, servo, receiver and transmitter, motor. Pls help🤔🤔
Very nice Build!! I really like your techniques.
Great vid what is the length of the wings?
Hi, awesome plane. Just one question, where do you put the carbon strips and rods? Thanks
I put it in next planes
That's a nice airplane you got there, but as an RC plane builder I can't help it sohere are some tips to improve you plane :
- your servos are very far away from your control surfaces so you have quite a lot of bending in the rod and therefore you loose some control over your plane
- your propeller is barely bigger than your motor mount which makes you loose a lot of power and efficiency through the air. I agree it looks good on the plane, so if you don't change for a smaller motor mount you should get a bigger propeller and maybe a lower kv motor. It will allow you to have way more thrust with the same power level, you could even carry some payload which seems like the design of the plane.
Thanks, I didn't think at all about the size of the motor mount
Nice build 👌😄
It would be nice if you add photos of the plane. very nice, thank you.
I am getting jealous of you. How do people achieve such a perfection, my hand cut pieces are never accurate, they always have errors, vertical and horizontal stabilizer are most of the time tilted even after using triangle, and one wing always gets higher dihedral than the other 😭
nice job buddy. whats the max thrust of the motor? and i have emax RS 1106 6000 kv and max thrust 220grs does it work for this plane? thanks
170g
Здравствуйте, подскажите пожалуйста на полётный контроллер matek f411 можно ли подключить приёмник flysky i6b
What do you call that clear adhesive you used? Thanks
I'm looking to start in the hobby, do you think this is a good and easy enough model to build to get in to RC aircraft?
As a first building project, yes. As a flyer, maybe not. I would recommend getting a flight simulator first and practicing. And if you've got any more questions you can message me on Discord ( there is a link to my server in the desc of my latest video) and I would be more than happy to help!
Great work by the way
crayzy build ;) sooo light! ;)
Nice one. Cam I get the Plan drawing template you used in tracing and cutting out please?
link in description below video
Great designing and building. What glue do you use?
I build this rc plane in Styrofoam sheet the full weight of the my plane is 1350grams so what kind of motor I want to buy? Or a2212 2700kv motor in 10" Props is enough for my plane????
Buen video
Me gustaría ver más vídeos sobre aviones
Buen trabajo
Круто) попробую сделать свой с братьями
Thanks for this great material. I have one doubt and need help: piece ‘By has a 2% angle in its front. In which direction should the angel point? Left or right? Or it depends on the engine rotation?
www.balsaworkbench.com/?page_id=2714
NumaVIG thanks a lot!!!
Два момента улыбнуло это Лев Толстой и концовка.(у самого есть небольшое кладбище)
Hi. I would like to use the same receiver super light, in your experience, do you recommend for Park fly? Is long range or how long?
transmitter is more important for range, I didn't fly further than 300 m, everything was OK
Hi, thanks for posting this videos and inspiring us to adventure in this amazing world of RC planes. Im building your model. And I have few question:
What model of Cessna is this?
When you put the Scotch tape, you do on both sides or just one?
It is really necessary the iron? if so why?
Thanks, and looking forward for a reply.
both sides of what? just do as shown ua-cam.com/video/RHN2Ea3izpg/v-deo.html
Super lovely!!...please sir can you share the plan drawing template🙏🏻
What does NumaVIG mean and where are you located (Northern Europe - Scandinavia or a Baltic state, I guess)?
You should try painting it, I think light gray with red lines should go nice.
Can we use 850 mah 53g 2s lipo in it ?
350 mah - crashes without damage, 850 mah - nose will be broken
thanks for sharing , I'm gonna make some shopping but before that , May I have an idea about the glue you are using for depron ? seem better than UHU Por . thanks in advance for you answer , regards from Belgium
I don't know, I didn't use UHU Por
Looks pretty stable in the air tho
still need a stable pilot :-)
Can you show me the white things that you clip on to the rudder and elevator please?
aliexpress.ru/item/32830491746.html
can you use a 5200mah battery?
Brilliant work.can i use balsa 3mm instead of foam ?
complimenti Ho fatto 3 dei vostri modelli Cesna .Exstra 330 e mig 29 .Ora prova volo ...
Nice..
Small suggestion..
Depron form can be pricey...
Dollar tree has form for a buck...
Thanks for the flight.
✌
Walmart has foam board for 88 cents a piece