I had one for years loved it. Only problem I had was wet deck boards and muddy tracks cant drive up. Maybe some expanded metal or aggressive tread plat. Enjoy Be Safe!
I would check out ION from Texas. I custom ordered one from a local dealer designed to meet my personal , specifications brakes for all axles, safety concerns, ramps, weather proof floor bed, 8 foot width, spare tires, etc. I love it!
I wish someone would demonstrate loading two separate units like two side by sides each 10' long on a tilt trailer. Or perhaps a large side by side along with a small one.
Nice new toy Andrew! You definitely picked the right model. This one will make your life easy and you'll get so much use out of it. Better to spend a little more today and be happy. As the kids say these days, yolo. Good luck with the clean up from Debby.
Andrew, what a great addition to your equipment lineup! So user friendly and like everything with you, it’s built like a tank! Very well thought out design by Iron Bull! Great video too!
Thanks Andrew, With the deck tilted, I can relock the latch assy on mine and the Deck will latch when it comes back down. My Cylinder is pre set and never had to adjust it. My Box is big enough for a hydraulic Pump & Battery should I need to connect the Cylinder to it. My Ramp set has pins at the plate where it sits on the Trailer. all I had to do is drill some holes in the tail board for them to drop into so the Ramps have no chance to slide off. Should I need another spacing for some other equipment I just use a ratchet Strap underneath to hold the Ramps in place. Mike M.
whoo-wee! thats a beaut! I went looking for the Live, forgetting it was Sat. LOL stupid storm messing up my calendar 😂 Love this trailer its really impressive
I have a Bri-Mar hydraulic tilt deck trailer with removable fenders. Little more complicated than yours because you have to work the up down controls for the hydraulic cylinder to tilt the deck but it’s a great trailer!
Nice trailer Andrew, great addition to the homestead. That hydraulic tilt bed is the bomb. I’ve used one without that feature, Definitely a game changer.👍🏼
I get that, but I'm exact opposite. I love the front deck for staging extra attachments that don't need to be on the tilt deck. This has been beneficial for me with excavator and tractor attachments.
Thank God! Do rejoice to see you expand your equipment assortment:))) I think it's because you selflessly help others that God presents you with great opportunities. May you use it for many years to come:)))) And of course, there's Ruger to guard it!!!
I would suggest to look into ways to secure the trailer during loading as the trailer and vehicle rock forward and back putting large loads on the park paw of the transmission. (14:40) Hopefully you have the parking brake engaged. I personally would probably look at tire clamps to go between the two axles of the trailer…
There is no movement FORWARD with this design when loading. The only time I've ever experienced this is when digging in a dump trailer with a tractor while attached to a truck. I've shown in videos to put the truck in neutral and apply the parking break to avoid any damage.
Could you consider a tie down video? Just a how to strap down any and all equipment with chain binders for the big stuff and ratchet straps for atvs and smaller items?
WOW Andrew That is a nice trailer you got me. With all the Equipment you have you definitely need that trailer man. Good video buddy thanks you for sharing this video & take it easy buddy. P.S. I was just in your area man Is dropping off a load for the hurricane 🌀 Victim . I will be doing this for a while.
very nice trailer, i always hate the teeter totter when loading heavy equipment on regular ramps, nerve wracking no matter how many times i've done it.
nice addition to the fleet. You could pull dump trailer to job site then tilt bed. Clear and load at the same time. Tiffany might like a new truck. just saying.
Hmmm 🤔🤔🤔🤔 now I'm starting to rethink of the trailer I ordered...... I went with a 18' one ... That's it I'm going to see if I can order a longer one 😢😢
Hi Andrew.. What is the overall length of your TWB 14 trailer? Also the length of floor space for the tractor and equipment? Great video and looks like a great trailer to buy. Enjoy you videos and keep posting.
I'll need to measure overall, check the video description for the main trailers website. Deck length is 22ft, the longest trailer I've used and I don't regret getting it. The length is perfect for my big tractor and equipment.
I hate to say because prices change and people look at older videos and hang on to that. Let's say high $8s right now 8/2024. I called for a local built cheap trailer I was talking about and it was $6k plus all taxes and fees. No reason not to upgrade to an Iron Bull fold flat ramp trailer or a little more for a tilt. So much better built!
Ride both on one after the other with two people. Or..... Ride one on before the tipping point AFTER locking the hydraulic cylinder to the close position. Lock the parking brake and the ride the other on. Last option is ride one on and tilt close. Then use cheap ramps to drive a second on. Multiple ways to do it.
You can only haul one side by side on that. My buddy has one, and he wishes he didn't buy it. You said you have all that extra room. Well, how are you going to load up anything else with no ramps because the first thing you loaded goes past the tilt part. Also, the square tubing rusts from the inside out. I would rather have me my trailer built out of ibeam and c channel. Nice trailer. I hope it works out for you.
You got to think a little. Lock the hydraulic cylinder in the closed position as you pull the first side by side on OR have the second one drive on behind the first with a second person. Third option is drive the first one on and close the trailer. Then use CHEAP ramps to drive the second on. If all you do is double load, get a different trailer. If you occasionally double load get a cheap set of ramps. I got mine for single equipment loading like 99 percent of other people. It's the best option by far for that.
It's gas sadly, this old truck hates towing a heavy load lol. That is a new Baumalight mini stump grinder for compact tractors. I'll have a video out soon.
Seems like as heavy as they built it adds up to a lot of weight. What is the carry capacity on it? With 7 k axles it probably won’t even carry my ctl 75-3.
You have the option of adding 8k axles on this as well. I'd rather have over built and less "capacity" trailer than under built and always wondering if it's going to fail. I felt that way with the cheap lightweight local trailers I looked at.
Hmmm - I made a comment on your trailer yesterday and it disappeared again. This is becoming very annoying as this has happened many times and only on your channel. Any ideas why? (and I really like the trailer)
I honestly don't know. The only reason they get automatically deleted is due to outside links or anything vulgar. I've never seen you post anything like that.
@@TKCL Nope, that isn't my issue, but they don't even post in my list of comments under my account - I'm baffled. Guess I'll have to start double posting LOL...that'll help the algorithm🤣🤣🤣
Another benefit is it doesn't lift the back of the truck when loading and unloading
That's a very good point and a huge safety concern at times.
@@TKCL for sure
It’s obvious how happy you are with your new trailer. I’m so glad for you!
I absolutely love it!
I had one for years loved it. Only problem I had was wet deck boards and muddy tracks cant drive up. Maybe some expanded metal or aggressive tread plat. Enjoy Be Safe!
If I ever experience that I think I've already got an idea for traction. But I love the idea of expanded metal.
@@TKCLyou are always in problem solving mode. You are so talented in many ways.
I would check out ION from Texas. I custom ordered one from a local dealer designed to meet my personal , specifications brakes for all axles, safety concerns, ramps, weather proof floor bed, 8 foot width, spare tires, etc. I love it!
Iron bull is also from Texas. I custom ordered mine as well. So many options available.
Looks like an awesome trailer. I can see it getting a lot of use in the immediate future. Congratulations on a quality purchase.
Thank you so much, it's definitely going to be used.
Nice!!! Congrats on the new addition to your equipment line. Thank you for all the great details and pointers.
Thanks for watching!
I wish someone would demonstrate loading two separate units like two side by sides each 10' long on a tilt trailer.
Or perhaps a large side by side along with a small one.
You'll need ramps, but it's quite simple. Pull one on and lock up the trailer. Use ramps to load the second one on.
@@TKCL thanks, that's what I thought.
@@TKCL a deal breaker for my use. If I've gota get the ramps for one vehicle I might as well just load two saving the cost of the dump.
Good point about the fold up ramps not being in the way
Nice new toy Andrew! You definitely picked the right model. This one will make your life easy and you'll get so much use out of it. Better to spend a little more today and be happy. As the kids say these days, yolo. Good luck with the clean up from Debby.
Thank you so much
Wow. Congratulations on the newest addition to your big boy tool box.
Thanks, can't wait to put it to use.
Perfect timing Andrew 👌
Just what you needed for mobility of equipment after a storm.
Agreed!
Andrew, what a great addition to your equipment lineup! So user friendly and like everything with you, it’s built like a tank! Very well thought out design by Iron Bull! Great video too!
Couldn't agree more! Thank you for watching.
That trailer will come in handy for you
Very informative! Thanks for the content
My pleasure!
Thanks man. I love it.
Looks like a very helpful addition.
I think so too!
Hi, Andrew! Excellent purchase. You are always looking ahead for all possible scenarios.
Thank you it's perfect for my needs.
Thanks Andrew,
With the deck tilted, I can relock the latch assy on mine and the Deck will latch when it comes back down.
My Cylinder is pre set and never had to adjust it. My Box is big enough for a hydraulic Pump & Battery should I need to connect the Cylinder to it.
My Ramp set has pins at the plate where it sits on the Trailer. all I had to do is drill some holes in the tail board for them to drop into so the Ramps have no chance to slide off. Should I need another spacing for some other equipment I just use a ratchet Strap underneath to hold the Ramps in place.
Mike M.
I don't plan to double load, but I have been curious about ramps in case I ever need to do that.
WOW great trailer Andrew , that will get the job done
I think it will! I'm so excited to start using it.
whoo-wee! thats a beaut! I went looking for the Live, forgetting it was Sat. LOL stupid storm messing up my calendar 😂 Love this trailer its really impressive
That thing is nice, Andrew!
It sure is, I feel so blessed to have it.
Andrew you picked a very well built trailer, good job. Also lots of great features.
I agree, you get what you pay for. Sometimes you get more.
I have a Bri-Mar hydraulic tilt deck trailer with removable fenders. Little more complicated than yours because you have to work the up down controls for the hydraulic cylinder to tilt the deck but it’s a great trailer!
I really like the basic open/close hydraulic function of this one. Tilt deck trailers are sweet!
Nice trailer Andrew, great addition to the homestead. That hydraulic tilt bed is the bomb. I’ve used one without that feature, Definitely a game changer.👍🏼
It's amazing, I couldn't be happier with it's performance.
Nice trailer. Awesome feature👍. Add a winch for loading disable equipment.
I think I’d prefer a full tilt deck vs a partial tilt deck. Only in case I needed to winch up a broken down vehicle or tractor.
I get that, but I'm exact opposite. I love the front deck for staging extra attachments that don't need to be on the tilt deck. This has been beneficial for me with excavator and tractor attachments.
Thank God! Do rejoice to see you expand your equipment assortment:))) I think it's because you selflessly help others that God presents you with great opportunities. May you use it for many years to come:)))) And of course, there's Ruger to guard it!!!
Thank you so much, it's an absolute blessing to have this equipment.
I would suggest to look into ways to secure the trailer during loading as the trailer and vehicle rock forward and back putting large loads on the park paw of the transmission. (14:40) Hopefully you have the parking brake engaged. I personally would probably look at tire clamps to go between the two axles of the trailer…
There is no movement FORWARD with this design when loading. The only time I've ever experienced this is when digging in a dump trailer with a tractor while attached to a truck. I've shown in videos to put the truck in neutral and apply the parking break to avoid any damage.
Hi Andrew, you know your stuff snd do your homework before you buy something. Very impressive unite for sure. 👍👍❤️❤️🇨🇦
I love researching stuff long before buying it. Thats just as fun as owning it to me.
Have you put out a video of the stump grinder. I haven't seen that before.
🤫🤫🤫🤫 you didn't see any LoL... 🤷🏽♂️ I was thinking 🤔 the same thing
Not yet, currently testing that for the company and recording content. Thanks to the hurricane we have some stumps 😩
@@TKCL more stumps = more videos 🤔
@@5150cash true true, but stump grinding in 115 degrees isn't fun 🥵
@@TKCL better you then me 🫣🫣
Love your channel, bro. Might want an ironbull shirt instead of a norstar, though lol
Norstar makes Iron Bull by the way. That's the parent company.
Do they make that trailer with 9k axles
@@NITELIFEKENNEL no, but they do offer 8k axles as an upgrade.
Could you consider a tie down video? Just a how to strap down any and all equipment with chain binders for the big stuff and ratchet straps for atvs and smaller items?
Honestly I'll need to research that more to make sure my way is the correct DOT way.
Good day to all.
Good afternoon
You could always pull a bolt or 2 and fold over the rotary cutter rear wheel for extra room to keep from hanging off the rear
Many options
WOW Andrew That is a nice trailer you got me. With all the Equipment you have you definitely need that trailer man. Good video buddy thanks you for sharing this video & take it easy buddy.
P.S. I was just in your area man Is dropping off a load for the hurricane 🌀 Victim . I will be doing this for a while.
I absolutely love this trailer! Appreciate you hauling stuff for people in need. Stay safe!
Love that trailer! Lets talk about that stump grinder attachment..... you like it?
Just got it, it's the smallest one made that I am aware of. A perfect match for a small tractor. Ask me in a week or two after testing 😉
@@TKCL definitely! Interested in how they work.
@@HalfPint5811 not going to be anything like that monster you have!
very nice trailer, i always hate the teeter totter when loading heavy equipment on regular ramps, nerve wracking no matter how many times i've done it.
Especially with an excavator
nice addition to the fleet. You could pull dump trailer to job site then tilt bed. Clear and load at the same time. Tiffany might like a new truck. just saying.
If UA-cam doesn't work out in the future for some reason, that's exactly the kind of work I plan to do. I'm building my arsenal.
Andrew, I like to see you on the one wheeled motorcycle that you speak of LOL
No more, had 5 and risked my life enough 🤣
Nice , what’s the deck length, what’s the trailer weight empty ?
Deck length is 22ft and weight is 4365lbs.
Now all you need is a new Duramax! I predict you'll have one by April 2025!
Amen to that! The last puzzle piece
Heck yeah Duramax diesel 💪🏽💪🏽💪🏽💪🏽 and no not at my expense crystal 🔮 🙄
Andrew, I am moving next to you so i can use your new toys!
Come on!
Hmmm 🤔🤔🤔🤔 now I'm starting to rethink of the trailer I ordered...... I went with a 18' one ... That's it I'm going to see if I can order a longer one 😢😢
I almost went 20 and I'm so glad I got 22.
Can you put both of your SxS's on it? The Ranger and Mahindra?
It does appear to have enough room for that. I had the ranger on it the other day and there was a lot of room left.
In. Looks like it is very well built. Electric trailer brakes?
Absolutely has trailer brakes
Hi Andrew.. What is the overall length of your TWB 14 trailer? Also the length of floor space for the tractor and equipment? Great video and looks like a great trailer to buy. Enjoy you videos and keep posting.
I'll need to measure overall, check the video description for the main trailers website. Deck length is 22ft, the longest trailer I've used and I don't regret getting it. The length is perfect for my big tractor and equipment.
Sweet new trailer Andrew very impressive. Now I want to trade or sell my ramp one for a tilt deck trailer 😊
Tilt is the way to go in my opinion. A little more but absolutely worth it.
Love it. How much is it? I haven't hit the end of video yet but I want one.
I hate to say because prices change and people look at older videos and hang on to that. Let's say high $8s right now 8/2024. I called for a local built cheap trailer I was talking about and it was $6k plus all taxes and fees. No reason not to upgrade to an Iron Bull fold flat ramp trailer or a little more for a tilt. So much better built!
@@TKCL Thanks fair enough. Solid trailer.
How do you drive a second piece of equipment on to the trailer like a couple of ATV’s or a tractor and a zero turn
Ride both on one after the other with two people. Or..... Ride one on before the tipping point AFTER locking the hydraulic cylinder to the close position. Lock the parking brake and the ride the other on. Last option is ride one on and tilt close. Then use cheap ramps to drive a second on. Multiple ways to do it.
Where is its parking bay?
I cleared out a spot today in the big barn.
You can only haul one side by side on that. My buddy has one, and he wishes he didn't buy it. You said you have all that extra room. Well, how are you going to load up anything else with no ramps because the first thing you loaded goes past the tilt part. Also, the square tubing rusts from the inside out. I would rather have me my trailer built out of ibeam and c channel. Nice trailer. I hope it works out for you.
You got to think a little. Lock the hydraulic cylinder in the closed position as you pull the first side by side on OR have the second one drive on behind the first with a second person. Third option is drive the first one on and close the trailer. Then use CHEAP ramps to drive the second on. If all you do is double load, get a different trailer. If you occasionally double load get a cheap set of ramps. I got mine for single equipment loading like 99 percent of other people. It's the best option by far for that.
Ironbull tilt trailer equipment
I wish i would've bought a tilt deck trailer for the business!! Hate them stupid ramps 🤣
I hate ramps myself, gets so aggravating. Especially if you have multiple jobs in a daym
Is your truck a Diesel , what kind of stump grinder is that?
It's gas sadly, this old truck hates towing a heavy load lol. That is a new Baumalight mini stump grinder for compact tractors. I'll have a video out soon.
What's the weight of the trailer alone?
4365lbs for a load capacity of 9635. You can add 8k axles to this for 2k more load capacity.
Seems like as heavy as they built it adds up to a lot of weight. What is the carry capacity on it? With 7 k axles it probably won’t even carry my ctl 75-3.
You have the option of adding 8k axles on this as well. I'd rather have over built and less "capacity" trailer than under built and always wondering if it's going to fail. I felt that way with the cheap lightweight local trailers I looked at.
Weight capacity with 7k axles is 9365lbs. Add 2k more if you upgrade to 8k axles.
Andrew how is the watermelon / pumpkin patch doing
I let it go since we went on the carnivore diet. However it produced a lot of watermelons. I may or may have ate a few 😉
Nothing wrong with a fruit snack...
The only downfall I could see is it being a 3/4 tilt and not a full tilt. Would be hard to mount a winch and winch non running cars/equipment on to it
That's true, but there are also benefits to partial tilt as well.
👀👀
Alright, that's it. Gonna have to stop watching. You're just making want to buy stuff i have no use for! 😂😂 Awesome trailer!
Lol I know the feeling when I watch other channels 🤣
just dont load up a pickup that dont go under its own power! its a pain in the butt if you dont move it back over the back and then drop it!
No stopping power is worse than no towing power 😬
@@TKCL lets just say it got hung up on the trailer lol! good thing for rolling floor jacks
Hmmm - I made a comment on your trailer yesterday and it disappeared again. This is becoming very annoying as this has happened many times and only on your channel. Any ideas why? (and I really like the trailer)
I honestly don't know. The only reason they get automatically deleted is due to outside links or anything vulgar. I've never seen you post anything like that.
@@TKCL Nope, that isn't my issue, but they don't even post in my list of comments under my account - I'm baffled. Guess I'll have to start double posting LOL...that'll help the algorithm🤣🤣🤣
@@PJ-uv9fr do it to it!