When your watching a Rob Dahm video and he doesnt have a outro soo mid sentence the video just ends, you sit there for a moment staring like oh, uhhh okay i guess the videos over now.😂🤦♂️🤦♀️
Holy shift. its a T-fif- T-six- its a 357 magnum that will blow away your stock trans. it will short throw your stock trans into the garbage. magnum. its got electrolytes
Life hack: The fuel gauge in your instrument panel has a fuel pump symbol. Next to the symbol is a triangle pointer and the side that the pointer is on (left or right of the fuel pump) indicates what side your fuel door is on.
I just rebuilt the T56 in my LS 240SX drift/street car so it’s neat to see the differences; watching you drive I can tell the magnum trans is more notchy/deliberate on shifting and has a shorter throw than the regular 6-speed👍
Hey, just a heads up for basically every car-- Your gas gauge usually has an arrow inside of it pointing to the side the gas door is on. If it doesn't have an arrow, it's the side the gas gauge is on.
Better then all _Fast and Furious_ shift scenes combined... P.S Will there be an engine rebuild on the 3-rotor in the future at some point? [Due to Apex seal failure]
You can pick these transmissions up for $1500, and they come bolted to an aluminum-block LS motor, so if you need a swap... T56 holds a lot more power than most other OEM transmissions. I would love to see a T56 and K-swapped Miata. Makes for a heavier trans but a lighter engine, which shifts the weight distribution more rear-ward to get that extra honda power down.
Tbh the T56 isn’t a bad trans. It can support up to 500-600 HP. And with the right short shifter 👌🏽. The magnum is just a crazy beast and with the right shirt shifter is an entirely different beast!
This is why the T-56 is one of the most popular aftermarket and stock performance transmissions ever built, able to handle whatever amount of power you throw at it. The Magnum model shouldn't shear the synchronizers like a stock T-56, that's a common complaint.
It's amazing how much more drivable it is with the new turbo setup. If you and/or your viewers go back and look at the 'What it's like to drive a 3 rotor RX7' video (something like that) you'll be surprised how different it is. The old setup had the worst turbo lag imaginable. I wonder how much power it would have had with all rotors running full song. Perhaps my 889 hp guess might have been closer. ;-) Thanks for the video, Rob. I always love seeing your RX-7 content!
One HUGE downside of the Magnum is shifter location. The problem here is that the term ‘T56 Magnum’ suggests the transmission is a drop-in for the T56. But the shifter is about four inches forward compared to the standard T56. This forces anyone wanting to use this transmission forces T56 applications to cut an additional hole four inches forward and possibly have to deal with interference between the shifter and stereo and/or center console. Or use shifter extenders that may not fit under the car between the transmission and transmission tunnel. Admittedly, you can now get the Magnum F, which is a true drop-in replacement. But it was a long time coming, which forced MANY people to buy the ill-fitting original. Of course, the Magnum F also costs more.
Did you ever look into a MagnumXL? I'm using one for my LS swap in my BRZ. The shifter on the XL is further back than the T56 and lines up dead center to where the stock one used to be!
3:10 Fast and Furious throwback... How's the cooling system going? (No I'm not gonna stop asking that until you don't need the thermofans until you get to really heavy traffic)
One HUGE downside of the Magnum is shifter location. The problem here is that the term ‘T56 Magnum’ suggests a direct drop-in replacement for the T56. But the shifter is about four inches forward compared to the standard T56. This forces anyone wanting to use this transmission in T56 applications to cut an additional hole four inches forward and possibly have to deal with interference between the shifter and stereo and/or center console. Or use shifter extenders that are expensive and may not fit under the car between the transmission and transmission tunnel. Admittedly, you can now get the Magnum F, which is a true drop-in replacement. But it was a long time coming, which forced MANY people to buy the ill-fitting original. Of course, the Magnum F also costs more. But it is still cheaper than buying the original (which should NEVER have been sold as an upgrade to the T56) and trying to adapt it.
Who needs a radio when theirs a rotary under the hood. Just sounds sickely, cant wait to see the 4 rotor tearing it up. id totally have a licence plate that said rotofap
you know on the dashboard where you gas gage is located, there is a tiny arrow which points either left or right and this lets you know which side the fuel filler door is located
That click click in between gears is very mechanical and beautiful to watch. I'm curious to know how it will behave being thrown fast into a gear at the drag strip.
Hey Rob, there's some sort of weird high pitched whine coming through the left channel in your video, mostly noticeable for the first few minutes where the soundscape is relatively quiet, probably microphone buzz or something, just letting you know, if you weren't already aware. Peace.
When your watching a Rob Dahm video and he doesnt have a outro soo mid sentence the video just ends, you sit there for a moment staring like oh, uhhh okay i guess the videos over now.😂🤦♂️🤦♀️
LOL, I know the feeling!
Thought I was the only one.
Ha magnum something you definitely don't use
alexlam24 lol
Neither do you
You are the worst Uber ever
Request An uber burn baby burnn
I dont get it
I’m sure it will be able to handle all the power that the 4 rotor won’t be producing.
😂😂😂
Damn man, he has a family!
@@RobDahm i god this is so sweet this comment aged like fine wine
@@Bman2393 lol
@@Bman2393 it sure did🤣
Holy shift. its a T-fif- T-six- its a 357 magnum that will blow away your stock trans. it will short throw your stock trans into the garbage. magnum. its got electrolytes
Closed captioning provided by Ben 😂😂😂
plants crave electrolytes
But what are electrolytes?!
+Big 'ol Booty Cheeks
its what plants crave
Hachi Roku because Brondo's got electrolytes
He can change the gears but he can’t change my mind that the insight is better than the 4 rotor
At least we get videos of the insight...
Thank you LiquidIV! One of the few times I don’t mind sitting through a sponsor pitch. Might even check them out
Throw distance is accurately depicted on sticker.
The T56 magnum is such a good upgrade for any car. I can’t believe how easy it seems to be to adapt them with the adapter plates available as well
the word your looking for is your car is a little more seasoned or polished
srslash901 refined.
streamlined
Mature
anal
>watch some random stuff
>rob posts video
>ofuk
>pause whatever the hell you're doing
>watch rob's video
Boi Alpha Rob too, not that Beta with a Corvette
04:34 How close to redline was that pull? It sounds like this engine can rev to infinity, lol. Sounds eargasmic!
Abel had the rev limiter lifted to 8500. It wasn’t close to that. She loves to wind out. It’s so damn sexy now
Rob Dahm omg pls do a video of you just doing pulls with only sound of the car
water bear Mic'd up bay and exhaust
Life hack: The fuel gauge in your instrument panel has a fuel pump symbol. Next to the symbol is a triangle pointer and the side that the pointer is on (left or right of the fuel pump) indicates what side your fuel door is on.
I just rebuilt the T56 in my LS 240SX drift/street car so it’s neat to see the differences; watching you drive I can tell the magnum trans is more notchy/deliberate on shifting and has a shorter throw than the regular 6-speed👍
Kame Trick the “magnum” actually means it’s not a T56 at all it’s a TR6060
Jon Fanning I did get that from watching the video but guess I didn’t show it in my comment haha. 😅
That laugh at @4:37 is the genuine laugh from a kid who had the first taste of candy.
That smile from that small 3rd gear pull at 4:25 :D
Hey, just a heads up for basically every car-- Your gas gauge usually has an arrow inside of it pointing to the side the gas door is on. If it doesn't have an arrow, it's the side the gas gauge is on.
Better then all _Fast and Furious_ shift scenes combined...
P.S
Will there be an engine rebuild on the 3-rotor in the future at some point? [Due to Apex seal failure]
hopeful for this too
Lucky Rooster Darnit! It was the auto correct that did it. I am innocent!
Good eyes on your part though *:)*
If he doesn't rebuild it after it goes, he's a fucker. And he knows better to not keep a 20b car on hand.
My dudes got 911 seats and a evo wheel lmao this car is Frankenstein asf💀
510 Ology thats not an evo wheel. thats a sparco wheel.
@@niallcorcoran4437 yea sparco from stock evo 8
Who cares?
3:07 the new fast and furious looks so good 😍😍
U need to post the detail on how/where to buy the parts and estimate price in the discription
Great video Rob - much love from NZ
Sean Wilson Rfb
Tyler Hansen nah nah nah. T fucking D
I was not ready for how small that first shift throw was lol. Gave me a little chuckle. What a cool car man
it's 3 in the morning here and i'm watching someone play with a meatstick
totally worth it.
btw, i totally understand your reaction at 5:08
looks like a Miata 6 speed with an IRP shifter, except it doesn't sound like its dry inside and about to explode.
Thinking about building a 4 rotor with a big turbo for my first ever car. Just got my license. Super excited.
Got to hear it more than B is for Build. Thanks for the braaaps Rob.
I think the word REFINED is a acceptable word too. Great video Rob. Can't wait to seen more.
5:08 What all of us are gonna do when we see the 4 rotor run.
Alex already disliked this video, so I guess I gotta like it now :(
Thanks for reminding me to give him a thumbs up. Get on it, gang!
Cant wait to see this car properly dialed in at the project car challenge next year
Have you clean up the 3 rotor yet? If not please do because this is a beautiful car. And is that a Porsche bucket in the drivers?
You can pick these transmissions up for $1500, and they come bolted to an aluminum-block LS motor, so if you need a swap...
T56 holds a lot more power than most other OEM transmissions. I would love to see a T56 and K-swapped Miata. Makes for a heavier trans but a lighter engine, which shifts the weight distribution more rear-ward to get that extra honda power down.
a magnum is not 1,500...
I love you Rob.
Tbh the T56 isn’t a bad trans. It can support up to 500-600 HP. And with the right short shifter 👌🏽. The magnum is just a crazy beast and with the right shirt shifter is an entirely different beast!
This is why the T-56 is one of the most popular aftermarket and stock performance transmissions ever built, able to handle whatever amount of power you throw at it. The Magnum model shouldn't shear the synchronizers like a stock T-56, that's a common complaint.
3:13 shit had me rolling lmao😂😂 perfect slow shifting.
@robdahm Rotary for life!! I need to do more with first gen RX7 and rotary powered Miata. Keep posting these video's definitely motivation..👍
Just ordered my CD00A and all the goods from collins adapter for mine. hope im as happy with it as you are this.
God dahm that exhaust note is quite amazing
5:42 i think the word your looking for is streetable
Must have your wideband sensor disconnected.
No it'll give an e code. I have the same mtx-l as he does. But he may have the plus.
Rob I love your videos, keep up the good work
The word you're thinking of Rob, is refined.
The best engine sound I ever heard and will ever hear, really
The LS definitely isn't meant to go up around 8000+ rpm, so how's the t56 hold up at those kinds of rpms on the rotary?
Hey Rob Dahm, I love the Ghostbusters shirt!!!!!
Forgot to mention that the t56 Magnum does not prevent STDs.
j b the magnum is too big for me :(
It does help smash STI's though
it most definitely does. if you meet a girl in a bar and you tell her about your new t56 transmission. you will not get lucky that night.
It's amazing how much more drivable it is with the new turbo setup. If you and/or your viewers go back and look at the 'What it's like to drive a 3 rotor RX7' video (something like that) you'll be surprised how different it is. The old setup had the worst turbo lag imaginable.
I wonder how much power it would have had with all rotors running full song. Perhaps my 889 hp guess might have been closer. ;-)
Thanks for the video, Rob. I always love seeing your RX-7 content!
I got that GTO T56.. notchy AF! 🤘
I just want to see you walk that corvette...
where's tha 4 rotors Rob 😈😂😂😂😂 man I'm so excited to see that on tha roads keep up tha good work love your videos man 😁😁
The way you described the stock transmission reminds me of my s2000 transmission
One HUGE downside of the Magnum is shifter location. The problem here is that the term ‘T56 Magnum’ suggests the transmission is a drop-in for the T56. But the shifter is about four inches forward compared to the standard T56. This forces anyone wanting to use this transmission forces T56 applications to cut an additional hole four inches forward and possibly have to deal with interference between the shifter and stereo and/or center console. Or use shifter extenders that may not fit under the car between the transmission and transmission tunnel.
Admittedly, you can now get the Magnum F, which is a true drop-in replacement. But it was a long time coming, which forced MANY people to buy the ill-fitting original. Of course, the Magnum F also costs more.
Did you ever look into a MagnumXL? I'm using one for my LS swap in my BRZ. The shifter on the XL is further back than the T56 and lines up dead center to where the stock one used to be!
Think imma throw a t56 magnum behind my 383 build going in my 77 maverick 💪🏽
I’m supposed to be getting ready for work but ehhh rather watch this
Jersey Dave Me too lmao
I Am Sekou Why are you salty though? You're syaing some reckless shit on like every comment 😂
I Am Sekou mannnn I just got off work at 11:30 😂😂😂
3:10 Fast and Furious throwback...
How's the cooling system going?
(No I'm not gonna stop asking that until you don't need the thermofans until you get to really heavy traffic)
Great review and video as always !!💪🏻🔥🔥
Had a T56 on my Terminator cobra, the engine will blow before the transmission ever does. They're strong as shit!
WE NEED MORE VIDEOS LIKE DIS
Awesome stuff Rob!
One HUGE downside of the Magnum is shifter location. The problem here is that the term ‘T56 Magnum’ suggests a direct drop-in replacement for the T56. But the shifter is about four inches forward compared to the standard T56. This forces anyone wanting to use this transmission in T56 applications to cut an additional hole four inches forward and possibly have to deal with interference between the shifter and stereo and/or center console. Or use shifter extenders that are expensive and may not fit under the car between the transmission and transmission tunnel.
Admittedly, you can now get the Magnum F, which is a true drop-in replacement. But it was a long time coming, which forced MANY people to buy the ill-fitting original. Of course, the Magnum F also costs more. But it is still cheaper than buying the original (which should NEVER have been sold as an upgrade to the T56) and trying to adapt it.
That thing sounds so sick!!!!!!!!!!!!!!!!!!!!!!!
T56
T56 magnum
Tr6060
are all different transmissions just clearing up the mis information in this video
T-56 Magnum = aftermarket version of the TR6060
T56 case + TR6060 internals= T56 magnum
Who needs a radio when theirs a rotary under the hood. Just sounds sickely, cant wait to see the 4 rotor tearing it up. id totally have a licence plate that said rotofap
Rob your car is so much more mature now
Love that shift sequence slow down lol fast and the furious style
That annoying buzz in my left ear was not from the 4 rotor Rob!!
I can’t wait until everything in this car is sorted out. Interior trim etc all the little things
Don’t worry guys . A couple more years and the 4 rotor will be done. He should have just gotten Dan to do it for 200$ Bocks .
Im considering a T56 swap on a 2jz build. Would it be a good thing or just get a r154 or a w58?
Three rotors sound soooo good! Soo much better than a two rotor.
Thing sounds like a 2 cycle Ryobi string trimmer lol
Sounds angrier . Cheers for this vid
The diff (quick change) is a very good choice very easy to work on
you know on the dashboard where you gas gage is located, there is a tiny arrow which points either left or right and this lets you know which side the fuel filler door is located
Man power looks so smooth compared to the old setup where it looked like it punched you in the chest when boost kicked in
at 3:35 you describe where reverse is that's not the same as indicated on the shift knob.
Car sounds AMAZING!
I heard water.... is also good for staying hydrated
When are you going to provide a wide ranging update talking about the move to Cali, what’s going on with your business back in Detroit etc?
I enjoy your content, don’t understand why people hate so much :/
Man that RX-7 sounds beautiful
S W E E T ! Sounds and shifts. SMOOTH ! 🔥👍
Longer videos Rob please!
3:00 almost felt liek fast n furiuos scene. I wanna see you make a cut like that.
friggin rad man
When will the three rotor finally give out?😩😩😩
Key words, "The T56 Magnum works!"...and that's all we need to know. LOL!
explain to us how the batterys on the insight work, if it's worth to replace, or do like some people that just take it out
I love the sounds your car makes:) eargasmic...
Love the videos, car sounds mean man
This thing sounds so damn good
That click click in between gears is very mechanical and beautiful to watch. I'm curious to know how it will behave being thrown fast into a gear at the drag strip.
Wil the 4-dorito be done before 2019?
1/5th of this video was an ad. LMAO DAHHHMMMMMMMMM BOI
Liquid IV sounds like that next level pedialyte.
Hey Rob, there's some sort of weird high pitched whine coming through the left channel in your video, mostly noticeable for the first few minutes where the soundscape is relatively quiet, probably microphone buzz or something, just letting you know, if you weren't already aware. Peace.
5:48 is 'refined' the word you wanted?
What was your solution for the power plant frame and running this transmission?