Jared Gann can't get the detailed shots with a stand without setting up, this way it can be done faster and you don't really lose much since the channel isn't focused on vehicle repair
Why not run some plastic conduit for the wiring harness . It'll look much cleaner and help proctect the wiring. It's real cheap at harbor frieght . I've been using it on my. 240 and it's held up real well.
Hey Dahm! I know u probably know more than me about rotaries, but I toured the waterline from the back of the water pump housing to the rear iron and my motor was running better. The block off ain't bad, but I just didn't want the back pressure on the water system. Good work G I'm doing my rebuild soon too ✊🏿
I’ve got an oil that I’m curious if you’ve ever tried,,,,,, Golden Spector. I use it religiously in all my quads, trikes and dirt bikes. I’m at 3500 hours on my final bore LT250R on the same piston, rings and hone. I replaced the head gasket after I ran the engine with flood water still in it and it lifted the head, but there was zero coking in the combustion chamber. Still have cross hatching, still making 240lbs of compression. Exhaust port wipes clean with a finger even after running leaded fuel through it for the past 800 hours.
Wicked vid as always rob i remember the first time i watched the vid of the car a few years back what it's like owning a 20b rotary and loved the car ever since. It would be awesome to see abel do a wild peripheral port haha good luck and can't wait to see what ever magic he comes up with
Dude what a phenomenal video. I'm blown away by the phenomenal one handed automotive repair and the phenomenal one handed fuck ups. It's just a phenomenal overall experience with a phenomenal car. BTW where's the phenomenal 4 rotor.
Hey Rob, can you explain more about the oil pooling. I have engine out right now with some pooling in my fd block runners. Bad porting job? Not flowing properly?
Hi Rob, If you are happy with your wiring loom layout, you should wrap it with self fusing silicone tape wrap - protects your wires from heat, damage etc and make the harness piece easier to handle ;-)
You need a gtx4508r it's the biggest t4 turbo from Garrett. Also a lot of people don't make use of the fact that the Garrett turbo is water cooled and it makes them so much better so get one of those turbos and plumb it in
I wanted to ask. Have you seen the new anti freeze? Its waterless. It don't cause corrosion. It has a boiling point of 350°. And it don't build any pressure in you rad. Or anything I forgot the name of it. But its suppose to help run alot cooler. It might help your set up. Hope this helps.
Its called Evens high performance engine coolant. If ts a new engine you can put it staigt in. If your draining your system you have to use a prep. And it 375° boiling point
2 questions. Can we have a garage update? And now that the powertrain is out will you do a full paint job? Even if its a cheap or diy but atleast to paint the new bumper and hood. And give it a uniform look. Love the rotary knowledge sensei 🙇🏽♂️
Have you tried the Motul 2t 800? I'm no oil guru but it worked great in my SA22C & my KDX250. I got into it due to some older gents that raced RZ500's said it was GOLD JERRY. Love the videos as always.
Please use the rubber hammer next time you pull out that piece out. I bet you'd prefer going 10 steps for one instead of it flying to your face next time. Otherwise, I'm so pumped for the 26B! Keep your work up!
As an aspiring mechanic and lover of Rotary Engines, it is my dream to one day build a turbocharged rotary powered nissan skyline, subaru impreza, or porsche 944 call me crazy but i think any of those cars would be an absolute monster with a flame spittin loud spoolin high revvin rowdy rotary under the hood
Amsoil has the best premix period had a modded Baja dirt bike from early 80's that could and did munch the Factory 250's "nothing stock" from the mid 90's had the motor apart and internals = spotless aside from the piston and ring and all 16 or it's parts... alcohol top end run powerband was the entire throttle till the piston gave up it's spirit :D
Dahmn, I've been only working on my 2.5TDI A4 B6, and now 335i E92 and Volvo V70 2.4T but these dorito powerplants really tempt me more and more since it looks like you can disassemble EVERYTHING with one freaking hand! Try do that on my named car engines! For example, I just had to replace alternator regulator on the Volvo... Took 2 hours to do and you literally have a bare engine bay in the same time!
Isn't that a small clutch as it's the same size as the entire motor the exhaust housing for the turbo is bigger than the crankcase this is crazy how small a rotary motor is
11:30 - "Mmm Whatcha say...."
lolol pin this.
Tavarish when your lambo lift only works in one direction "Mmm Whatcha say..."
Someone please tell him to use rubber hammer for stuff like this
lmao love you man.
just like before i gouge myself, saw it coming, too late to stop.
Rob's genius multi-task moments
01:55
09:35
11:29
Lars Mars Cars if you play them all consecutively it's gold lmfao im crying.
Alvaro Perez same , you are a legend
I'm fucking crying I haven't laughed this good at such stupid shit in a while
Absolutely love it😂😂😂😂😂❤
Nice one.
UA-cam, where I come to watch people perform automotive repair using only one hand.
Pornhub, where i go to watch people perform interesting things while I only use one hand.
That's what I thought also. Can this guy not afford a camera stand?
Jared Gann can't get the detailed shots with a stand without setting up, this way it can be done faster and you don't really lose much since the channel isn't focused on vehicle repair
@@danielross5931 lmao
#noshaveuntilfourrotor
Michele he'll win a beard competition before the 4 rotor runs
He will look like Confucius by the time he finishes that car
Our lord and saviour of the Dorito religion is back to bless us with knowledge and wipe our impure minds of none Dorito power
But I can't stop thinking about a Big Block Ford or Chevy wiping the floor with every rotary ever created :)
StarGaming Do you not see your gods are all the same ours is special ours is mazda!
A-brap
Was literally putting Doritos in my mouth as I read this lol
lmao he should put a dorito wrap on the 3 rotor... or even better on the 4 rotor
He’s just going to put a 4 rotor in there and say that’s what he’s been working on all along
Kyle Keogh nope another 20b
But he’s already working on a 4 rotor. He claimed that it would also be pushing over 2000HP at the crank.
Why not run some plastic conduit for the wiring harness . It'll look much cleaner and help proctect the wiring. It's real cheap at harbor frieght . I've been using it on my. 240 and it's held up real well.
Dude get one of those gopro straps for your head. Watching this gave me anxiety.
Mint. All his money goes to car stuff...
What a phenomenal removal experience
p h e n o m i n a l
You should prank Abel by telling him you want to LS swap it
Lars Mars Cars Noooooo! You don't joke about that shit dude, I'm traumatized just thinking about it ; )
NOOO. It is a crime to joke about putting a LS into a RX7.
Hey Dahm! I know u probably know more than me about rotaries, but I toured the waterline from the back of the water pump housing to the rear iron and my motor was running better. The block off ain't bad, but I just didn't want the back pressure on the water system.
Good work G
I'm doing my rebuild soon too ✊🏿
Clean up all that wiring while the engine is out, looks horrible
JJ O.Z She's a go'er, not a show'er
Agreed, I'm surprised the wiring has lasted that long laying on a hot motor without any sleeving.
Yea, he should get some Tesa tape.
on this episode rob gently moves his home made spaghetti to the side and finds several of his ports cream pie'd
amazing video. one handed working and filming, explaining. ugh genius! how are you not at 2 million subs? can't imagine the editing lol
I love your water pump removal technique, had me in tears!
Thanks for filming while you did all this. It's cool to see
It's so cool to see Corky Bell's work in your car. I've had margaritas with the man! Very Humble!!
Dahm it you need a Jared to hold the camera while you work. My heart about stopped when i saw the radiator fall.
Daddy Dahm dat beard is looking awesome! Grow that thing out to your chest! Oh and WHERE'S THE 4-ROTOR!?
MnOutback37 where's the 6 rotor
Where’s the 8 rotor
Where's the bi-six rotor twelve rotor though
I’ve got an oil that I’m curious if you’ve ever tried,,,,,, Golden Spector.
I use it religiously in all my quads, trikes and dirt bikes. I’m at 3500 hours on my final bore LT250R on the same piston, rings and hone. I replaced the head gasket after I ran the engine with flood water still in it and it lifted the head, but there was zero coking in the combustion chamber. Still have cross hatching, still making 240lbs of compression. Exhaust port wipes clean with a finger even after running leaded fuel through it for the past 800 hours.
10 years out of a heavily boosted dorito motor is actually really damn good!
nothing special about it. Americans just tend to think they are crap because their sister's boyfriend's dads cousin had one that blew up in '84.
Boost goes in through the intake ports, Apex seals leave through the Exhaust.
😂😂😂
*really dahm good
14:33 *->* 14:49
Finally I can relax. Thank you Rob.
Probably the best engine removal video ive ever seen
Rob you dahm legend it was cool meeting you at the vintage show a couple weeks ago
PLEASE FOR THE LOVE OF GOD CUT THE ZIP TIES, LABEL EVERYTHING AND WRAP IT UP FOR PROTECTION!
Every video you post makes me like rotary engines less and less.
you should rewire the whole car😎
WHERE’S THE FOUR ROTOR??????
He already done a video about the circumstance with the 4 rotor, Funnily enough the video is called "Wheres the 4 rotor rob"
Shut up!
Do u know how much a 2 rotor build cost! 🙄
draggeeks1 I hope you're joking 🤣
In Patreon
Frankly im more intsrested in this build than the 4 rotor right now.
All the best bro and looking forward to see what would you create
Hey rob please do us all a big solid and clean that engine bay
Rob Dahmmit you’re my hero.
So are you gonna finally fix your tachometer?
TheSupermonkeymaster I take it you don’t have Patreon?
You really should upload more video’s. You gotta pump those numbers up, Rob.
Can’t wait to see this thing looking like it SHOULD. Keep up the good work rob 👍
A basic gimbal would go a loooooong way. Keep up the good work!
Can wait to see when this gets completed.
I’ve actually met the guys at Full Function! Great guys! They bought my old RX-8 from me.
"Unholy" dude you just said the motor had a crack where it was leaking oil from. Besides everybody knows every Rotary is Holy😇
Perfect time to clean up the wiring
Wicked vid as always rob i remember the first time i watched the vid of the car a few years back what it's like owning a 20b rotary and loved the car ever since. It would be awesome to see abel do a wild peripheral port haha good luck and can't wait to see what ever magic he comes up with
One of the neat things I realized about rotaries over the last few months, is that they are the only legal 2-stroke cars in the states.
That car is soooo ghetto, but it sure as shit gets down! Props for being a UA-camr that actually works on your car and knows the car well.
1:29 I was thinking to myself "oh no baby, what is you doing?" LMAAOOOO I didn't think it would actually happen🤣🤣🤣🤣🤣🤣
Dude what a phenomenal video. I'm blown away by the phenomenal one handed automotive repair and the phenomenal one handed fuck ups. It's just a phenomenal overall experience with a phenomenal car. BTW where's the phenomenal 4 rotor.
Hey Rob, can you explain more about the oil pooling. I have engine out right now with some pooling in my fd block runners. Bad porting job? Not flowing properly?
You made that look way too easy. Well done and good luck!!
Hi Rob, If you are happy with your wiring loom layout, you should wrap it with self fusing silicone tape wrap - protects your wires from heat, damage etc and make the harness piece easier to handle ;-)
rip intercooler
I hope you also give the exterior and enginebay some love.
I didn’t think I had ocd till I saw your wiring.
Why is it pooling premix in the ports? Have they been polished yet?
Rob put a goddamn gopro on your head and take the parts out with BOTH hands instead of dropping everything... #thinksmarter still a dope vid.
I got ya beat in the manly engine lifting department.
Used to pull 12A's and (one) 13B from the wrecking yard cars with my bare hands!....in my youth
Good work rob doing it yourself but I am shocked that your wiring hasn't done the Rob under bonnet fire.
Imagine to swap in a 4 rotor and 4wd...
Rob Dahm, proving that you can do almost an entire engine removal with only one hand
You need a gtx4508r it's the biggest t4 turbo from Garrett. Also a lot of people don't make use of the fact that the Garrett turbo is water cooled and it makes them so much better so get one of those turbos and plumb it in
I wanted to ask. Have you seen the new anti freeze? Its waterless. It don't cause corrosion. It has a boiling point of 350°. And it don't build any pressure in you rad. Or anything I forgot the name of it. But its suppose to help run alot cooler. It might help your set up. Hope this helps.
Sweet Tee sounds nice, update us if you find the name
Its called Evens high performance engine coolant. If ts a new engine you can put it staigt in. If your draining your system you have to use a prep. And it 375° boiling point
Rob what do you think about the south African BMW M6 6-Rotor ?
Jens-Erik not as good as the 6 rota in new zealand.
Hey rob, try maxima castor 927. I use it on all my two strokes, it doesn’t poop up and leaves a nice even coating on all parts
I learned about rotary in this video then in person or any other video. Great job rob. Btw that hurt
Cant wait to see the internals of this thing. Are you putting in new rotors n seals or just putting new seals onto the existing rotors?
2 questions. Can we have a garage update?
And now that the powertrain is out will you do a full paint job? Even if its a cheap or diy but atleast to paint the new bumper and hood. And give it a uniform look.
Love the rotary knowledge sensei 🙇🏽♂️
hey while you have everything out you should tape up those harnesses.
Rob! Get a harness made! All those zip ties driving me nutz
Aww that's a cute 3rotor on your turbo
Drink whenever Rob says phenomenal
Have you tried the Motul 2t 800? I'm no oil guru but it worked great in my SA22C & my KDX250. I got into it due to some older gents that raced RZ500's said it was GOLD JERRY. Love the videos as always.
"This thing's really heavy and I'm really weak haha"
Yeah man great idea doing everything one-handed. Hey, watching this is kinda fun actually.
Rob be the kinda guy to take apart his car with only one hand
Cool! I can't wait to hear it screaming again!
Very nice Rob can't wait to see this engine build coming up ;-)
Please use the rubber hammer next time you pull out that piece out. I bet you'd prefer going 10 steps for one instead of it flying to your face next time. Otherwise, I'm so pumped for the 26B! Keep your work up!
Really need to protect that harness
As an aspiring mechanic and lover of Rotary Engines, it is my dream to one day build a turbocharged rotary powered nissan skyline, subaru impreza, or porsche 944 call me crazy but i think any of those cars would be an absolute monster with a flame spittin loud spoolin high revvin rowdy rotary under the hood
*Center of absolute ground* 🙏🏽🙏🏽🙏🏽🙏🏽 AMEN
Boi do you need a tripod for your phone/camera. could get some good time lapses of part removal too
Amsoil has the best premix period had a modded Baja dirt bike from early 80's that could and did munch the Factory 250's "nothing stock" from the mid 90's had the motor apart and internals = spotless aside from the piston and ring and all 16 or it's parts... alcohol top end run powerband was the entire throttle till the piston gave up it's spirit :D
How to build a 1000hp rotary
Step 1: throw a vast quantity of money at it
Dahmn, I've been only working on my 2.5TDI A4 B6, and now 335i E92 and Volvo V70 2.4T but these dorito powerplants really tempt me more and more since it looks like you can disassemble EVERYTHING with one freaking hand! Try do that on my named car engines! For example, I just had to replace alternator regulator on the Volvo... Took 2 hours to do and you literally have a bare engine bay in the same time!
Rob Dahm the one handed mechanic
what song is this? 0:22
Good luck Rob
Cool video rob! getting down and dirty tearing that baby apart!
That motor made 900 wheel how much more power do you need??
THAT WIRING! Hahahah oh god
Isn't that a small clutch as it's the same size as the entire motor the exhaust housing for the turbo is bigger than the crankcase this is crazy how small a rotary motor is
Hey rob, what port are you doing for the 3 Rotor?
The thumbnail to this video was just letting us know how much of banger this video would be..
Hey rob there’s a old video on here of your car running mid 9s, I’m wondering did u see it?
👍 Rob! Next video should be interesting
Daddy Rob, always with the amazing content. 👌
is this going the be the mule for the 4rotor?
11:28 *yooooooooooooooooooooooooooooooooooooooo*
Hell... I'm almost thinking that the seals were gone, and the premix oil sloping around just happened to do the job
eye spy with my little eye a dusty, blurry ass 4 rotor in the background 13:45
what clutch is that?
What are wire looms? :O
The word of the days is “phenomenal”.
How many miles did you put on the engine before it's demise?