I remember calling y’all a few months back and walked me through what works best this takes it a step further. Y’all are doing a phenomenal job helping us the user out!
Great video. I'm struggling to figure out which bars to buy for my 2012 Softail Deluxe. Bought it used with ape hangers that are too tall. I'll follow your lesson and check out your website to see what I come up with. Great music at the end of the video!
About to buy some risers and bars for my 2022 Low Rider S. This helps tremendously. Gives me that peace of mind in knowing that I purchased the correct bar.
The detail and explanation for everything was great. Idk shit about handle bars and im looking for something probably 2 inches taller with a little more pull back. Can you guys do a detailed video on selecting risers and the bars? I have a victory hammer and theres not a lot of videos and idk what tranlates from harley to victory
I went with mid bend bar and 9.5 pull backs from TSC on my ‘21 RG setup. Fits me perfect. I’m 5’10 I stopped by Thrashin for a test fit before I purchased to be sure. They spent 30 min with me and provided excellent customer service 👍
How do you like that setup? I started with the 6.5” pull-back risers and high bend bar, and I really liked it. I went down earlier this year and figured I could go taller. So, I went with the 8” straight riser and high bend bar, but it feels just a bit too tall.
,I find when on the highway for hrs I need a bend in my arms , like road glide bars ,will the road glide bars fit 2024 low rider ST without extended kit mahalos. big island
Ok, now whats the best way to determine the correct pullback riser?? I currently have a 1” pullback but my elbows are almost locked, I feel I need at least a 2” pullback? Dom you have any simple way of figuring this out?\ thank you
Good info, in my experience finding the right bars is the most difficult upgrade on any bike since it can vary so much per individual. I have spent some time replacing bars only to find I hated them when I finished the install. Do you have mock up's in Canoga Park people can try one for size? Maybe even Lance or Gaylen's bikes if there around :-). I am down in OC.
Great video dudes. Now we just need to get all the other companies to use degrees instead of inches for sweep because the comparison between each bar/brand is what most people look for. Love what you guys are doing🤘🏼
Thanks for this I just ride what feels good! Thanks for teaching us that there is some science to this. Maybe there’s different bars that would be way more comfortable. Back to the drawing board. Keep up the great work guys! ✌🏾on the floor.
Can you make another with further detail for us noobs? How does the riser height and handle bar height all come into play? Basically you want your arms straight out to be most comfortable?
I am in this boat. Its either Thrashin mid or aggressive. I will do the measurements and make a decision. Its all about the SWEEP. My 2010 fat bob stock bars are horrendous.
Amazing video guys, I personally have the mid bend bars along with 8inch bung king risers, with 2 inches of pullback, I'm a shorter guy at 5'6". I really wish you guys made some 8 inch pullback risers because the 9.5 with the mid bend bars might of been too tall for my short ass arms lol plus I didn't know if 1.5" would be enough pullback for my height. First time I was picking out bar/riser combos and most videos online don't help because everyone is taller than me lmao.
I need help bad , I got a stock Harley fat bob 2016 I just want some high bend bars what can I get with out having to buy 1000 extra things for the set up
I must add, width will change your degrees based on the angle of you elbows. Though this is a GREAT first step I’d encourage marking the width of your hand placement.
I also marked off two points on my tape. One for 30.5in bars and one for 34.5in bars and noticed that if I keep my elbows in the same place (slight bend in my elbows) and draw my hands in to 30.5 from 34.5 my sweep angle decreases. This was important for me to know, since too much sweep hurts the outside part of my wrist. I currently run a wider bar that has 24 degree of sweep and it works fine, but I believe it is going to magnify my wrist issue as I go to a shorter bar. I'm no engineer, but I think it was good to find this out as I am looking at the Thrashin "aggressive mid bend" at 5 degree of sweep which should work great. I'm fortunate in that I have another dirt bike with 31.5in protaper (factory suzuki/ktm bend) contour bars with very little sweep and it works fine.
Excellent video guys! Simplified, straight forward & nice presentation and explanation. Tom M., So. Cal. '21RGS (currently researching handlebars to upgrade from the stock RG bars) Thanks!
Dudes...that was educational and informative AF! For real. Thank you both! ✌🤘
Hell yea, thanks for watching Peter!
I concur. I’m so glad I watched this video.
I remember calling y’all a few months back and walked me through what works best this takes it a step further. Y’all are doing a phenomenal job helping us the user out!
Excellent Information and interesting
good video lads essential info for new bars 👍👍
Glad you think so!
Great video. I'm struggling to figure out which bars to buy for my 2012 Softail Deluxe. Bought it used with ape hangers that are too tall. I'll follow your lesson and check out your website to see what I come up with. Great music at the end of the video!
Glad it was helpful! Hope you find the perfect bar setup!
Fantastic explanation! Thank you so much for this info!
Hell yea, thanks for watching!!!
About to buy some risers and bars for my 2022 Low Rider S. This helps tremendously. Gives me that peace of mind in knowing that I purchased the correct bar.
Love the, how to videos, vlogs, apparel and company. Keep it up!
Thanks I hope I can find the right Juan
The detail and explanation for everything was great. Idk shit about handle bars and im looking for something probably 2 inches taller with a little more pull back. Can you guys do a detailed video on selecting risers and the bars? I have a victory hammer and theres not a lot of videos and idk what tranlates from harley to victory
What is the bars set up on the red bike at the end? Is that the Harley fairing?
I went with mid bend bar and 9.5 pull backs from TSC on my ‘21 RG setup. Fits me perfect. I’m 5’10
I stopped by Thrashin for a test fit before I purchased to be sure. They spent 30 min with me and provided excellent customer service 👍
Thank God for you guys! I'm about to buy handle bars and I want to get it right the first time around! You guys rock!🤙🏿
Perfect timing!
I need to know what the riser height and bar choice add up to in ape hanger size. 12”, 14” etc.
You guys are the best! I was looking for new handle bars now I can get it right the first time!
Cool tip, will try on the next bar set up👍
Thanks for the info. Do u sell bars n raisers for metric bikes?
I just picked up 9.5” pull back with mid bend bars for me 2000 fxdl
Can u do a video on risers, best way to pick
We definitely will. Thanks
Awesome video this seriously helped me as someone looking at your guys handlebars however I didn’t feel like risers were even talked about lol
That’s next. 🤘🏻
Take us back to school, boys! Contrats on getting Jaun on the team, BTW -- hell of an asset there! (Hi Juan.) 😉
Will you guys be making a more aggressive bar that is more flat or straight across for the 2024 models?
We don't have any plans to as of now but that could always change if we get enough hype around the more aggressive bars!
I love how this video feels like a rehearsed school presentation 😁 A+ info though! Really helped a lot
Are you all going to do a video on risers or have you ? We don’t have a lot of people with tbar experience in my area haha
Hey, what’s the purpose of the 5 degree sweep on the aggressive bars? Are there people that will fit that bend better or is it more for looks? Thanks!
Mostly guys who stunt their bikes.
Ah, so not me lol, thanks much!
Awesome info and learning something new thanks guy's stay safe out there and love the videos
Great video!... I have the 22° low bend on my road glide, great bar!
I ordered 6.5” pull back risers with aggressive mid bend bars. 🤓
How do you like that setup? I started with the 6.5” pull-back risers and high bend bar, and I really liked it. I went down earlier this year and figured I could go taller. So, I went with the 8” straight riser and high bend bar, but it feels just a bit too tall.
@@rideforsobriety I sold that bike, I have an fxr now. But it has 8” dmr pullbacks and biltwell midbend
@@hybridEP3 Did you have a chance to ride that bike with the 6.5” pull-back risers and aggressive mid-bend bar?
What’s the best set up for a 5,7 guy?
Thank you for wonderful information and that is so useful. I didn’t know that. ✌🏽⚡️😀🔥
Did Juan have any bend in his elbows when he measured?
,I find when on the highway for hrs I need a bend in my arms , like road glide bars ,will the road glide bars fit 2024 low rider ST without extended kit mahalos. big island
Great educational content. Thanks
Hell yea, thanks for watching!!
Ok, now whats the best way to determine the correct pullback riser?? I currently have a 1” pullback but my elbows are almost locked, I feel I need at least a 2” pullback? Dom you have any simple way of figuring this out?\ thank you
Awesome work fellas! Do your bars taper from 1 1/8” to 1”?
I was today years old when i learned this.... thanx
perfect video, thanks! btw any recommendations, what risers to choose..?
Good info, in my experience finding the right bars is the most difficult upgrade on any bike since it can vary so much per individual. I have spent some time replacing bars only to find I hated them when I finished the install. Do you have mock up's in Canoga Park people can try one for size? Maybe even Lance or Gaylen's bikes if there around :-). I am down in OC.
Great video dudes. Now we just need to get all the other companies to use degrees instead of inches for sweep because the comparison between each bar/brand is what most people look for. Love what you guys are doing🤘🏼
That's pretty cool. Now please show us the equation to use when the bars are raked back to match the forks.
Funny thing I did the same thing before finally buying the low bend bar lol. Great video as always!
that's perfect, it works!
Thanks for this I just ride what feels good! Thanks for teaching us that there is some science to this. Maybe there’s different bars that would be way more comfortable. Back to the drawing board. Keep up the great work guys! ✌🏾on the floor.
Can you make another with further detail for us noobs? How does the riser height and handle bar height all come into play? Basically you want your arms straight out to be most comfortable?
I am in this boat. Its either Thrashin mid or aggressive. I will do the measurements and make a decision. Its all about the SWEEP. My 2010 fat bob stock bars are horrendous.
Haha!!! Aggressive bars are VERY straight. Just a heads up. Mid bend is our best seller.
@@THRASHINthen aggressives brought me to this video I currently purchased them and did not not the straight ness about to order mid bends
damn...that was informative as hell....well, I have the 9.5in risers, still using stock bars...I'm gonna have to try this.....🤘
Great job guys! So simple ,thanks!
dope video! learn something new everyday
Any more of these?
Excellent video.
Amazing video guys, I personally have the mid bend bars along with 8inch bung king risers, with 2 inches of pullback, I'm a shorter guy at 5'6". I really wish you guys made some 8 inch pullback risers because the 9.5 with the mid bend bars might of been too tall for my short ass arms lol plus I didn't know if 1.5" would be enough pullback for my height. First time I was picking out bar/riser combos and most videos online don't help because everyone is taller than me lmao.
You think an 1 1/2 taller will make a big difference?
I need help bad , I got a stock Harley fat bob 2016 I just want some high bend bars what can I get with out having to buy 1000 extra things for the set up
I must add, width will change your degrees based on the angle of you elbows. Though this is a GREAT first step I’d encourage marking the width of your hand placement.
I also marked off two points on my tape. One for 30.5in bars and one for 34.5in bars and noticed that if I keep my elbows in the same place (slight bend in my elbows) and draw my hands in to 30.5 from 34.5 my sweep angle decreases. This was important for me to know, since too much sweep hurts the outside part of my wrist. I currently run a wider bar that has 24 degree of sweep and it works fine, but I believe it is going to magnify my wrist issue as I go to a shorter bar. I'm no engineer, but I think it was good to find this out as I am looking at the Thrashin "aggressive mid bend" at 5 degree of sweep which should work great. I'm fortunate in that I have another dirt bike with 31.5in protaper (factory suzuki/ktm bend) contour bars with very little sweep and it works fine.
Does it affect your wheelies? Is there a certain combo that’s better for wheelies?
Wheelie what is comfortable for you. 👍🏻 tire and seat time play more of a roll
Excellent video guys! Simplified, straight forward & nice presentation and explanation. Tom M., So. Cal. '21RGS (currently researching handlebars to upgrade from the stock RG bars) Thanks!
What about the Pull-back?
Holy shit, that is awesome. Looks like I am going with you guys' product. Any military discount? 😁
Awesome video
Such a good video
Thank you. Thank you , Thank you oh so much .
Loves these vids. Good stuff.
Thanks for watching!!!
Distant between blue tape and your chest is what? Reach would also be important yes or not?
Degrees is just a simpler method, but if the bike world adopted a standard like say 4 in out from the bend, they could just as easily use inches.
Sure wish I would have known about you guys in 2020. Before I went with Apes on my RG. Awesome products.
Where the fu*k was Juan last year when I bought mine?!?! Just playin’, great idea!!!!!
haha! After years of phone calls, it made sense to help with a video!
Thanks 🤟
Any time!
Good stuff!
Helpful but no mention of shoulder width in relation to wrist angle? Stay safe!
Cool man look at that!
mid controls please
Only math I need in life!
Two lines and won't remember who is who? LOL. Good information though! I get the engineering!
Hellya
Im 17 degrees one wrist and 22 degrees the other. Now what??
Find the happy medium. 🫡 it’s not a perfect measurement or rocket science. But it’s a great ball park
Dang who knew?
Jaun rebelling against the cause and not wearing a Thrashin shirt 😤😤 not impressed
U guys should just start making videos daily
My buddy stabbed me with a compass in the 8th grade confirming my 16” apes!
🤘🏼🇸🇪
Instead of a 'protractor'.. Men call that a speed square... If you do construction like most men used to
Fire your script writer.
Unfortunately there is no script 🤣🤣🤣
@@THRASHIN Then hire one. Informative, but the presentation and the stiffness of the conversation is boring.