I really dig the gauges in front of the bars. I’m always worried that I won’t be able to see the radio if the gauges are behind the bars. I’m gonna do this entire set up on my road glide this winter, and I absolutely cannot wait to place the order
We have been sneak peaking this for over a month now. And still won’t be shipping this for another couple weeks. We have to innovate and keep progressing. Thanks for your support!
@@THRASHIN oh for sure lol I’m just impatient luckily my bar clamp is pre drilled. Gives me something to do come winter time. Everything I’ve bought from you guys have been the best quality I’ve owned yet
I’ve heard you need to flash the bike for keyless ignition but the way it’s explained in this video you can still turn the key to start but you do lose the ability to lock the forks. Is this correct or not?
With the new top tree you flash the bike to keyless so you can remove the OEM key switch/lock. The trashin top tree clamp has a new key to lock the steering. Is that what you mean?
Question - Does “OG Riser Gauge Relocation Bracket” include ARP screws (hardware) connecting the bracket and the Gauge Relocation housing? (Via 2 holes in the back)
I would also love to know this. Butchered my stock bezel and it needs to go asap. Would also like to point out that the perch clamps needed to be trimmed to fit my 22 rg
Yes, the OE with adapter plate. Ref. the 2.5” adapter height + 6.5” pullback with high bend bars. Would the 9.5” pullback with high bend bars produce the same with the new triple tree? Or would you suggest a different setup that is similar to the previous mentioned?
Hey Lance, I’ve been looking in getting a better handling bike and I think your Tbars are it. Just don’t know if it will be adaptable for my street glide. I am a short dude and would like a nice pull back. Is there a way I can come see you guys and help me choose and set it up?
I have started to invest in this set up getting the 9 inch riser with mid bar and adapter kit and like almost every product from thrashin, I absolutely love the way it looks. But after a long ride recently, my hands were absolutely numb from the vibrations since there is no vibration dampening engineered bars. Any suggestions or modifications to minimize vibrations?
So just to be clear, even with the pull back plate, you cannot lock the bars, or use the accessories position. The triple tree set up is lockable and you just have to flash for keyless bcm?
So, on a 22' Road Glide with 9.5 pull backs and mid bend bars you do not need an extension for the clutch cable or brake lines? Is that ocrrect? I just ordered this set up and got it, haven't installed it yet.@@THRASHIN
I’ve just ordered the 8” riser and the highbend mx bars along with the Roadglide adapter plate not realising that it also raises it up additional 2 3/8 inches will I have to get cable kit now?
I have the exact same bike - the 2020 RG CVO in the same Desert Sand Color. The bike has not chrome on it. everything blacked out. I see that in this bike chrome was used. Would you buy the blackout out version to match the theme, or chrome, like in this video, to have it stand out?
Depends on rider preference and height. We have been liking the 9.5” pull backs with our new tree, and 6.5” pull backs with the adapter plate. Then mid or high bend. Kinda just depends what you want
@@THRASHIN lol I tried. I won’t be able to package everything up and bring it home but I have been eyeing the new plate and full setup for my roadglide
Different configurations for different risers. 🤷🏼♂️ only takes a couple minutes to add it to the cart. Need help? Feel free to call or email with any questions and we can walk you through it. Have a great Memorial Day weekend.
I really like how you guys explained exactly what a customer would need to do a certain setup. Very informative, great job on the parts and video 👍🏻
Did you do it? If so what did you order and how do you like it?
I only refreshed like a thousand times on your site today and got my order in right when it opened up. cant wait to get my gauges relocated.
Hell yes! Yours will be one of the first going out. Thanks for the support Chris!
Yay! Going to get the full kit soon for my RG ST. May need to come in on a Saturday and talk through the right parts before purchase (from the OC).
I really dig the gauges in front of the bars. I’m always worried that I won’t be able to see the radio if the gauges are behind the bars. I’m gonna do this entire set up on my road glide this winter, and I absolutely cannot wait to place the order
Me too
Absolutely! Thank you Lance and Juan, Rock Out Bro's! I am definately considering!
Is these mid bend or high bend bars
Looks great! When are you going to do the install vid? Thanks
Filming the install video this Tuesday after Memorial Day. Hopefully live later in the week. Will happen before products ship
Super glad I just spent a grand and change on the old setup for this to come out a month later lol
We have been sneak peaking this for over a month now. And still won’t be shipping this for another couple weeks. We have to innovate and keep progressing. Thanks for your support!
@@THRASHIN oh for sure lol I’m just impatient luckily my bar clamp is pre drilled. Gives me something to do come winter time. Everything I’ve bought from you guys have been the best quality I’ve owned yet
Y’all need to do the older pre Rushmore as well. Idk why people don’t make them for the 09-13 road glides
Agreed I love the look of my 13 more than the new ones. Just wish there were options like this for mine.
Please make a lockable set up for the 20 & up street glide 🙏
What ya got for 2013
I have a 23 road glide with the big center cap fuel lid. Will the 9.5 pull back risers cause issues putting gas in my bike??
It will work great
I’ve heard you need to flash the bike for keyless ignition but the way it’s explained in this video you can still turn the key to start but you do lose the ability to lock the forks. Is this correct or not?
With the new top tree you flash the bike to keyless so you can remove the OEM key switch/lock. The trashin top tree clamp has a new key to lock the steering. Is that what you mean?
Question - Does “OG Riser Gauge Relocation Bracket” include ARP screws (hardware) connecting the bracket and the Gauge Relocation housing? (Via 2 holes in the back)
I would also love to know this. Butchered my stock bezel and it needs to go asap. Would also like to point out that the perch clamps needed to be trimmed to fit my 22 rg
I'd love to see a side by side with a rider of each riser highth just to get a visual of how each looks.
I want that full set up with the top Tree, the pull back risers and the high bend bars… I am 5.7, what size risers should I take? Thanks 🙏
Can you see the lower part of the gauges where the mileage, gear number and neutral are displayed as well as full view of the screen?
I 'm interested. you guys having an open house demo?
Did you do it?If so,what parts did you order and do you like it?
Would you have more vibration without bushings?
Is there a top tree for us poor people with a model year older than 2014?
So what's the torque spec for the pinch bolts on your top tree??
Very Kool.
Looks Great.
🤙🇦🇺🤙
Any plans for a 22 FXLRS gauge kit to work with your risers?
What setup with the new triple tree would you suggest that’s similar to the OE triple tree with 6.5” pull back and high bend bars?
The OE with the adapter plate?
Yes, the OE with adapter plate. Ref. the 2.5” adapter height + 6.5” pullback with high bend bars. Would the 9.5” pullback with high bend bars produce the same with the new triple tree? Or would you suggest a different setup that is similar to the previous mentioned?
Is there a list of parts for the white bike ???
Give us a call and we can help you out 818-626-8350
Looks like the Hole shot bracket will work for other risers ? Work for kraus ?
If you go with the 6.5 pullback and high bend setup do you need new cables and brake line?
Absolutely bad ass!
Hey Lance, I’ve been looking in getting a better handling bike and I think your Tbars are it. Just don’t know if it will be adaptable for my street glide. I am a short dude and would like a nice pull back. Is there a way I can come see you guys and help me choose and set it up?
dint make a 2014 roadglide!!!
I have started to invest in this set up getting the 9 inch riser with mid bar and adapter kit and like almost every product from thrashin, I absolutely love the way it looks. But after a long ride recently, my hands were absolutely numb from the vibrations since there is no vibration dampening engineered bars. Any suggestions or modifications to minimize vibrations?
Did you have to get extended clutch or break lines for a 9.5 rider and mid bend bars?
No. Not needed for that set up.
So just to be clear, even with the pull back plate, you cannot lock the bars, or use the accessories position. The triple tree set up is lockable and you just have to flash for keyless bcm?
Correct 👍🏻
@@THRASHIN awesome thanks!
Is the new lock in the top triple tree clamp function only as a lock or does I have the ignition in it ?
Lock only, ignition goes bye bye
Is the gauge relocation needed with the 6.5” pull back risers and high bend bars?
If you grab the road glide riser adapter you don’t need gauge relocation. Feel free to call if you have any questions 8186268350
Does this all work with the OE bar wiring, throttle/clutch? Wanting to order this setup for my 23 Road Glide 😍
Both set ups work with stock cables and wires. The gauge relocation we supply you with a wire extension
So, on a 22' Road Glide with 9.5 pull backs and mid bend bars you do not need an extension for the clutch cable or brake lines? Is that ocrrect? I just ordered this set up and got it, haven't installed it yet.@@THRASHIN
Does it work on a street glide? The new triple tree
I’ve just ordered the 8” riser and the highbend mx bars along with the Roadglide adapter plate not realising that it also raises it up additional 2 3/8 inches will I have to get cable kit now?
You should be good 👍🏻
what do you recommend for a 2022 TriGlide Ultra?
What do you make in t bar setup for 2013 road glide
I have the exact same bike - the 2020 RG CVO in the same Desert Sand Color. The bike has not chrome on it. everything blacked out. I see that in this bike chrome was used. Would you buy the blackout out version to match the theme, or chrome, like in this video, to have it stand out?
I like chrome! But both finishes look good on this bike 👍🏻
Can u see the gears ur in
Question boss. So I got a 97 Electra glide would I be able to use the trashin set up on that or no?
Any reason your triple tree plate wouldn’t work with a Kraus riser setup? I’d really like to use it with my Kraus setup
It should. But won’t work with any adapter plates
I didn't see any on your site. But, do you happen to have an 8 inch, pull-back riser?
We do not. We have 6.5” and 9.5” Pull Back. But we do have Risers Spacers and you can make the 6.5” Risers 7.5” 🤘🏻
🤘🏼🇸🇪 support
The elusive 2014 road glide 🤣
does those setup work on 2012 road glide?
what size bars are on the first bike ?
Now can y’all do this on a Street Glide? Asking for a friend😅
You can do this with a street glide. Had 9.5” pull back risers from Thrashin on my ‘19 Electra glide!
@@andrewcoffey4694 I know that, I was asking for a video on an SG. There’s next to none on here.
One thing that i don't see is a digital gauge instead of the original gauge. I think i would look so much nicer.
We have seen it done, we like the analog gauges
I’ve got a 22’ RKS. Do I need the perch clamps, or if I just wanna get the 6.5 pull back risers and your mid bars, can I plug and play just those..?
Pretty sure you need the perch clamps
I neeeeeee these
Any recommendations on riser height and pullback ?
Depends on rider preference and height. We have been liking the 9.5” pull backs with our new tree, and 6.5” pull backs with the adapter plate. Then mid or high bend. Kinda just depends what you want
Will the housing work with Dakota Digital gauges?
We don’t know. Never seen a Dakota digital gauge. If it is the same shape as the stock one front and back should be fine. But no promises
Page 3 pf the manual shows the back of the gauge which seems to connect a little differently. www.dakotadigital.com/pdf/MLX-8414.pdf
So what if I ride from nc to your shop in two months for you to install a set lol
Sorry! We don’t do installs 😏
But roll through and say hi!
@@THRASHIN lol I tried. I won’t be able to package everything up and bring it home but I have been eyeing the new plate and full setup for my roadglide
What height risers and bars on the white bike?
9.5” Pull Back with High bend bars
Their website doesn't offer much for Shovelheads, not really surprised.
What kind of mirrors on black road glide
Stock CVO mirrors
We can’t buy any hats cause you guys have them all!!!😂
It's 2026 and I'm seeing this video....Harleys fly now we don't need bars and risers
Hahaha well at least we warned you 😝
@@THRASHIN I see fork braces....yesssssssss
Soo you can’t lock your bike?
The new triple clamp has a steering lock.
It adds horsepower!
Really?!?
Maaan im super sad now i jus found out its 14 and up and i jus grabbed a 12 😂😢
Shit should all come in 1 kit!…
Different configurations for different risers. 🤷🏼♂️ only takes a couple minutes to add it to the cart. Need help? Feel free to call or email with any questions and we can walk you through it. Have a great Memorial Day weekend.
What about 13 and older
⚡️🔥
Thanks!! 🇺🇸🇺🇸
shit I wish I could afford a roadglide to put those on😂😊
I would love to review some of your products on my channel. If you guys are interested in collaboration I am here.
And it’s only $2,500 for a handlebar setup lol
Kraus isnt far from that either.
@@norsmanadventures they’re all overpriced imo
What size risers does Lance run?
9.5!