BMW 4x4 and DSC Dynamic Stability Control Warning Lights On!
Вставка
- Опубліковано 8 лют 2025
- Hey guys, in this video I demonstrated how to fix on BMW 4x4 and DSC Dynamic Stability Control Warning Lights On! I I demonstrated how to replace transfer case motor !
2009 BMW 335xi - amzn.to/3bLA3id
I hope this video will save you some money !
Hope you'll enjoy!
🎬
CAMERA USED: amzn.to/2CFsY5p
TRIPOD USED: amzn.to/2A6BLMQ
SD CARDS I USE: amzn.to/3hZ6FaO
EDITING LAPTOPUSED: amzn.to/2AZoCWp
SPEAKERS USED: amzn.to/38affPP
🛠
✅FANCY ... ) tools I use and highly recommend :
1. Scan Tool you must Have: amzn.to/3exBO3a
2. BEST Ratchet (Tool Only): amzn.to/3ey3YLs
3. Milwaukee Battery Set: amzn.to/2Z5FBye
4. Milwaukee Charger: amzn.to/3fZ0OAO
5. Basic Mechanic Tool Set: amzn.to/2B7dpTz
6. Professional Socket Set: amzn.to/2CFxDUX
7. Ratcheting Wrench Set: amzn.to/2BQjj8A
8. Battery Jump Starter: amzn.to/3eAq7c6
9. My Fancy Pro) Scan Tool: amzn.to/3dDShSh
10.VCDS store.ross-tec...
🎬
GEAR that i bought and I will use for future content:
CAMERA: amzn.to/2Zb7pkA
GIMBAL :amzn.to/2Vb6gIL
DRONE: amzn.to/2Yu7Qaw
LENS: amzn.to/2BCFzpk
MICROPHONE: amzn.to/3i2rMZO
MICROPHONE: amzn.to/2YvGhxB
LIGHT: amzn.to/3ewys0r
MICROPHONE SYSTEM: amzn.to/2B0DhAC
....Based on my research .BEST BUDGET GEAR!....
→ Become a FANCY MECHANIC Subscriber:
/ @firstautomotivechanne...
→ Instagram:
/ fancymechanic1
→ Twitter:
/ mechanicfancy
→ My Channel Home Page: / @firstautomotivechanne...
LINKS USED IN THE DESCRIPITION MAY
OR MAY NOT BE AFFILIATE LINKS
By using the affiliate links I earn a small fee of your purchase, it does not cost you anything extra to use them. They help me to be able to create more videos for you. Thank you for the support!
✅If the video was helpful, remember to give it a "thumbs up" and consider subscribing.✅
⚠ Disclaimer⚠
FANCY MECHANIC is not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not FANCY MECHANIC!
🔥This video made for entertainment purposes!🔥
#BMW #4x4 and # DSC Dynamic Stability Control Warning #Lights On!
Huge thanks on this one my dude! Saved me🤘🏼🤘🏼
Thank you,this was the help I needed.your video was perfect.
Simple and to the point thanks!!!!
First get it done wheel alignment then go for other options 👍
Nicely done Sir.
Thanks
Thank you 🙏🏻 hope I can fix my car now
hey Bud, that was good to show how to do the repair. BUT, using x2 worn gears that have completely different wear patterns (especially the one that was against the wiped out gear) is only putting off the inevitable. Either or both of those gears will fail again soon. Only replace with matching gears that are from the same unit or NEW gears will result in a proper repair.
what s the part change (AWD)name?
Hello do you know what code did you have regarding this replacement? Thank you and good video
I got the same problem on my sisters 08 X5. From what I know there’s no code. It’ll just show up on you dash board as 4x4 and DSC malfunction.
@@joseesparza9757 same thing here, I had replaced the actuator motor coded the faulty dsc adjustment code and it still comes back up, the previous owner of my car had done a xdelete, I’m going too try too code xdelete back onto the vehicle and see if that works
@@schro3532 this happened issue happened after I replaced her battery because it was at low voltage. I found out it’s just a reset. Had to calibrate to steering wheel.
@@schro3532 also it wouldn’t pass smog so she paid about 4K at a smog place for them to fix it. The replaced the catalytic converters. It pass but the engine light still shows up. Something about coding? I’m lost??
What did you use to clean it?
I had my transfer case gasket replaced 6 months ago along with transmission flush. Now my 4x4 light is on. When I try to make a sharp turn the car seem to be slipping gear and shaking
Same exactly repairs I needed to do, how did you fix this problem?
@@chaddychaddychaddy I replace the speed sensor and it was fix
@@SaiPhetreplaced my speed sensor its still on my dash
@@Fehliii you be to clear the code
How much did it cost to have the transfer case motor replaced?
06 BMW X3 with 178000 miles. I have the trio of lights since purchasing this vehicle 3 months ago. So far, I have replaced the trasfer actuator case gear via licensed mechanic. Then I DIY-replaced the ABS speed sensors and brake pad wear sensors all around the truck, with the exception of the rear right brake pad wear sensor. There's no connector in that spot and the lights are trying to reset, but comes back on after I drive a few miles. Any ideas?
What diagnostictool you use that video?
Hello!
I have a BMW f30 320xd, some time ago I received an error on board (Driving Stabilisation), the car now only enters comfort mode and I have traction only on the rear wheels, after some investigations I found the following codes: 48097D (Transmission box transfer - open clutch position, rear drive only) and 440101 end of transmission reached, I mention that the error appeared in the morning immediately after starting the engine. The car has no symptoms related to the transfer case, (ATC35L) it does not sputter or make strange noises.
The tires are identical and match, the electrical fuses were checked, the new actuator was coded with ISTA, it worked without problems for 3 days, I tried a recalibration with ISTA but it no longer allows it, I have the old actuator open and it seems that the new models they no longer have gears, they are in an electromagnetic field, I also changed the oil, it was a little dark, brown
The car is from 11.2013 and has 292000km, the first owner changed the entire transmission in 2016 under warranty in Germany
I thought maybe the clutch in the VTG was worn out. If I change the clutch in the box, can the actuator be recalibrated, do they have to be replaced with a new one? I initially thought it was the actuator and replaced it, but the error reappeared after 3 days.
Sincerely, Octavian!
I own a 2007 BMW x3, the 4x4 warning light comes on together with the wheel sensor when I give it 4000 rpm, then when this warning light comes on the car shakes and turns hard, then when I stop and restart the car it disappears. What could it be? does the problem show no problem? could it be the ABS sensor? thank you
I’m having the same problem please let me know
@@manuelmendoza5498 hello, I still haven't found a solution to the problem, at the moment it didn't light up, but if I turn it over 4000 revs it lights up instantly and the steering wheel turns hard.. according to the diagnosis everything is apparently ok, the mechanic told me when it lights up again I'm taking it to an auto electrician.
Hi, I have a e60 530xd 2006 and i replaced the actuator motor but i still get the 4x4 error every time i start the car after few minutes. What could be the issue?
wheel speed sensors, brake wear sensors, steering angle sensor. I've done the actuator gear and rear sensors and still have all the lights
Can these lights pop up because I have tires diferente sizes on back? I have 235/35 19” front. 245/35 19” rear. Could that be it?
No only I'd you crash and or you spinning to much
I changed the transfer case motor in I can't put it in drive or reversed
have a 2004 BMW x3 2.5i 4d SUV is this required for this year and model?? And is it possible that this make your 4x4 light come on ?? I also did a transmission filter change and a oil change, oil filter change, Bosch spark plugs change, and also did a new facelift shift knob. Does all that have to be reset??and could any of that make the 4x4 light come on? And it's on when I start the VEHICLE but when I drive it turns off and 4x4 functions work.
I have a 2009 bmw X5 and after sustained speeds of 40mph or more engine cuts off and I have to coast to shoulder of road *** also smells like something is smoldering...I had a tune-up and replaced surpentine belt and still prob persist do u think this may be my problem
Fantastico
My 2006 325xi just did this.. Can I still drive till I get the new part?
yes ,you can!
Ok kool.. thank you
How fast tho
2006 bmw 325xi owner here as well and my 4x4! And the 4x4 with a loop around it shows as well as the break lights and DSC I already changed the actuator for the transfer case and the abs sensors I actually had a messed up front differential so I fixed that as well and its still on do I just need to code them out
The whole DSC Module of my x3 is not communicating . I have replaced it, yet no solution, fuses are fine too
y todavia estoy luchando con ello
Mine would vibrate sounding like drive line was coming trough console when o turned is this same problem or is it the actual transfer case.
did you ever figure this out?
So the motor is what you have a spare of? If it's just the motor is that also $300-$400
Aliexpres 250 dollar
ahora me marca fallo 005EBA sensor de angulo de direccion, plausibilidad
a mi me marcaba 4x4 despues de cambiar 4 neumaticos, intente borrar con ista, y empezo a salir 4x4, abs, dsc, y se prendio freno de mano en rojo
Are you near NJ???
2005 x3 2.5L my dsc doesn't show light when pushed and 4x4 light on dash stays on..no other light is on ? also no codes show either.
Same here
Did you resolve this please update
What if u drive while it’s out
que podria ser esa maldita averia?
So I changed the actuator motor but it did notting the old one didn’t look bad could I have a bad transfer case
I replaced mine it did not work
This light just came on after replacing inner and outer tie rods🤔
Hey could you please message me I have questions about my 07 bmw x5 if you could help please. Thank you.
Mechanics did scan and still are clueless!
Codes say 227 & 228 which are o2 bank 2 control deviation and o2 bank 1 control deviation..
Also I have 4x4 DSC Inactive light on and hear grinding noise underneath at stops.
I assume Transfer Case Motor or Gear ??? Or oil ???
It feels like brake lock on when I stop down a hill..
What could it be???
Also...
My check engine light has Always been on for years ( Map Thermostat) which every mechanic told me not to bother replacing...
Recently The car has trouble starting every morning and when low on fuel.
Maybe Fuel pump Relay??
Fuel pressure regulator??
Fuel filter??
Fuel Injectors ??
They cant figure it out!
I Went to 20 car shops in 3 weeks and am really frustrated :(
What could it be ???
Bmw X5 2006 3.0
Start with fuel filter an fuel regulator after that try to start it and let me know
hello where are you located?
TN
Thing is my lights are on, but the all will drive works.
Did this and wasted my money cause it didn’t fix the problem. 😡
Same thing ???? Happen to me any updates
That only fixes it when you have a “4x4!” light. If you have a abs, traction control you may have a wheel speed sensor problem or yaw sensor problem
Most likely it’s your abs module unit
Hello bro,i have a 2012 750i i replaced the sensors and the transfer motor but the 4x4 light still showing any other idea?
replace the Transfer Case
Not solved 😞
55c3 error code
I change the transfer case actuator and the fuse, but the abs and traction control light is still on, it says rear left abs is bad. Will that cause the awd to malfunction
Yes , you need to change ABS sensor RL!!!
This is my case as well with my 2011 bmw 328xi, rear left sensor not showing wheel speed on scanner with the live data. BUT I have replaced the sensor and bearing with OEM parts and still will not read wheel speed.
I have 2011 328i xdrive, ABS light with brake light and 4x4 light is on, what should i do
I have replaced the transfer case still the light is on
@@ibehfamous2862speed sensor
@@ibehfamous2862did you resolve this please get back to men i have the same problem